Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore / Sears Washer Belt

Best Seller
Kenmore Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10006384

The washer drive belt transfers motor power to the washer’s drive system so the basket spins and agitates. Replacing a stretched or broken belt helps stop squealing and slipping so cycles finish at proper spin speed.

What it does

  • Links the drive motor to the washer’s drive/pulley system
  • Restores spin and agitation when the belt is worn, glazed, or broken
  • Can reduce squeal or burning-rubber smells from belt slip
  • Helps prevent intermittent or no-spin conditions

What’s included
One drive belt.

Install notes

  • Unplug power; turn off water
  • Tip the washer back; remove the bottom shield/cover if present
  • Route the belt over the motor and drive pulleys; rotate by hand to seat fully
  • Inspect pulleys/drive parts for wear; run a spin or calibration test after install

This OEM Whirlpool belt is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

Do-It-Yourself Stories from Customers like You Whirlpool Cabrio washer made a loud noise during the spin cycles it also was very noisy while washing   Ralph N. • Spring , TX • October 25, 2018

This was my first attempt, ever, to repair a washing machine. After some internet research on the problems, I was able to determine that the shaft seal on the gearcase probably was leaking water into the gearcase with each use. No water was ever found on the floor, but when I turned the washer over to inspect the gearcase, I found a black, oily residue on the outside of it along with the same residue on the pulleys, the belt and the motor. I ordered a new gearcase, shift actuator, splutch... Read more

More
$28.26
Compare At:
$33.63
You Save:
$5.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Dryer Drive Belt
Genuine Ge part
By: Ge
Part Number: WE12X10014

The Dryer Drive Belt is an OEM part for GE dryers that connects the motor to the drum, allowing the drum to rotate during the drying cycle. The belt measures approximately 87 inches long and 0.25 inches wide, with 4 ribs.

Over time, the Dryer Drive Belt can wear out or break, leading to the drum not turning.

Symptoms of a bad Dryer Drive Belt include:

  • The drum not spinning or rotating
  • A squealing or thumping noise coming from the dryer
  • The dryer stopping unexpectedly during a cycle

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This part fixes the following symptoms
  • Will not tumble
  • Won't start
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up   Gerald G. • Nashua , NH • March 20, 2016

My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ... Read more

More
$15.38
Compare At:
$27.08
You Save:
$11.70

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Washer Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134511600

The Washer Drive Belt is an OEM part for Frigidaire washing machines. This belt connects the motor to the drum, enabling the drum to rotate during the wash and spin cycles. It ensures the proper transfer of power from the motor to the drum, allowing the washer to agitate and spin effectively.

Common causes of a bad drive belt include normal wear and tear, overloading the washer, or a misaligned drum that puts extra strain on the belt.

Symptoms of a bad washer drive belt include:

  • The washer drum not spinning or agitating
  • A burning smell during operation
  • Unusual noises such as squealing or grinding
  • The washer stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Spins slowly
  • Burning smell
  • Pumps but will not spin
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You Noisey bearing on spin cycle   Neal G. • Klamath Falls , OR • February 14, 2016

I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple. Read more

More
$20.95
Compare At:
$24.93
You Save:
$3.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134719300

The Drive Belt is an OEM replacement part for Frigidaire dryers. It plays a crucial role in transferring the rotational motion from the dryer's motor to the drum, enabling the tumbling action necessary for drying clothes.

Symptoms of a need to replace the drive belt include:

  • The dryer drum not turning or rotating during cycles
  • Loud thumping or squeaking noises coming from the dryer
  • Visible wear, cracks, or fraying on the existing belt

Causes of a faulty drive belt can include general wear and tear over extended use, exposure to high temperatures or lint buildup, physical damage from foreign objects, or manufacturing defects in the belt material or construction.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryer models. 

Do-It-Yourself Stories from Customers like You Noisy electric dryer on startup   John B. • Wenatchee , WA • January 29, 2018

Disassembled dryer. Installed new belt, drum rollers, idler arm and blower. Read more

More
$53.72
Compare At:
$63.93
You Save:
$10.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: W11239857

The Drive Belt is an OEM part for Whirlpool washing machines. This belt works to spin the washing machine tub and agitate clothes during cycles. It transmits rotational power from the motor to the inner tub and outer tub.

Causes of a bad drive belt can include wear and over time usage, exposure to harsh detergents or fabric softeners that may cause premature wear and cracking, or damage from overloading the washer.

Symptoms of a bad drive belt include:

  • The washer tub not spinning or rotating very slowly
  • Loud squealing, squeaking or grinding noises when operating
  • The belt slipping off the pulleys
  • Vibrating that causes the washer to walk or move during cycles

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The metal om metal sound at the end of the spin cycle. Also found gearcase oil covering the inside of the drive belt plastic cover.   Harry S. • Belvidere , NJ • May 23, 2023

Replaced the Gearcase assembly which is a sealed unit that is not serviceable. Also replaced the clutch and belt because they were covered in gearcase oil. Read more

More
$44.95
Compare At:
$53.04
You Save:
$8.09

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10388414

The Drive Belt is an OEM part for Whirlpool front load washing machines. It transmits power from the wash motor to rotate the tub assembly, tumbling clothes during cycles. The belt is designed with deep grooves to securely grip the motor and tub pulleys. It measures 48.22” long uninstalled and will stretch to 51.53” when installed.

Causes of a bad Drive Belt can include cracks developing from repeated flexing during operation or stretching over many years. Debris trapped in the belt path can also wear down the belt prematurely.

Symptoms of a bad belt include:

  • The washing tub failing to spin or agitate clothes
  • Abnormally loud squealing noises from inside the machine
  • The belt slipping off pulleys during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, and select Kenmore front load washers.

This part fixes the following symptoms
  • Burning smell
  • Will not agitate
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Drum not turning   Paul H. • Seattle , WA • December 13, 2019

I pulled the unit away from the wall and noticed black dust on the floor. Unplugged the unit, turned off the water. Removed back panel (about 10 screws with Torx heads) and noticed the belt was off, the drive pulley was loose and wobbling on the shaft, black dust all over the inside. Belt was worn along one side. Some grooves/damage in the outer drum casing around the pulley where it appeared the belt had rubbed. Removed the lower crossbar (2 more screws) to get better access to the drive... Read more

More
$55.95
Compare At:
$66.58
You Save:
$10.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Drum Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051000

The Drum Drive Belt is an OEM part for Frigidaire dryers. It connects the drum to the motor, enabling the drum to rotate and tumble the clothes during drying cycles. The belt is 54 inches long and 5/8 inches wide

You should replace this drum drive belt if it becomes worn out, frayed, or broken due to the high heat and friction involved in the drying process. Additionally, improper loading or overloading of the dryer can cause the belt to stretch or snap.

Symptoms of a bad drum drive belt include:

  • Dryer drum not turning
  • A loud thumping or squealing noise during operation
  • Dryer stopping mid-cycle
  • Clothes remaining wet after the drying cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms
  • Spins slowly
See more...
Do-It-Yourself Stories from Customers like You Severe banging during spin cycle   Vince V. • Benson , AZ • March 03, 2019

With more difficulty and frustration than expected but it works fine now. Things learned: 1. Order only 3 replacement pins. One comes with the shocks that you can't be sure you see in the picture. 2. A circuit board in a plastic box mounted to the floor, left rear, must be removed by two screws to be able to get pliers onto the head of the pin more easily. This helps installation too. 3. A 1/2" deep socket pushed onto the retaining tab of the pin stays there while you pull with pliers from the... Read more

More
$21.95
Compare At:
$30.17
You Save:
$8.22

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8540101

The Drive Belt is an OEM part for Whirlpool washing machines. It transmits power from the washer motor to the tub, causing it to rotate during wash and spin cycles

Causes of a worn drive belt can include repetitive cycles over years of use. The belt undergoes stress each time the tub is set in motion. Damage from slipping off pulleys during operation can also affect the belt.

Symptoms of a bad drive belt include:

  • The tub failing to turn or rotate during cycles
  • Abnormal noises coming from the drive system
  • Looseness, cracks, or visible wear to the drive belt itself
  • Reduced tub movement even when the cycle is running

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You Broken belt   Victor A. • Davenport , IA • July 07, 2014

Using a nut driver I removed the sheet metal screws, removed the old belt and replaced it with the one. An easy repair. Shipping was EXCELLENT! Read more

More
$40.95
Compare At:
$49.14
You Save:
$8.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: W11213879

The Belt is an OEM part for Whirlpool washing machines. It is a crucial transmission component that connects the motor to the drive system transmitting power to the tub. During rotation, the belt spins the tub and agitates or extracts water as needed. 

Causes of a bad belt include general wear and tear over time, exposure to abrasive debris, or damage due to seizing components.  

Symptoms of a failed or slipping belt include:

  • Abnormal vibrations or noises during the operation
  • Slow or inefficient agitation or spin cycles   
  • The tub fails to turn despite a running motor

Replacing with a new OEM belt restores lost power ensuring efficient, balanced operation. Extend the life of your washer with this genuine Whirlpool part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Gear case failed and would not spin the wash basket and leaked oil.   Jason K. • Neosho , WI • July 21, 2023

I followed the AppliancePartsPros.com video where the gear case was replaced on a similar model, which gave me the confidence to replace the gear case on my washer. Read more

More
$21.95
Compare At:
$26.34
You Save:
$4.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Kenmore Drive Belt (Washer)
Genuine Frigidaire part
By: Frigidaire
Part Number: 134616700

This washer drive belt links the motor to the drum pulley so the machine can tumble and spin. Replacing a broken or stretched belt restores smooth, reliable drum rotation during wash and spin cycles.

  • Transfers motor power to the drum for tumbling and spin
  • Worn or broken belts can cause no spin/tumble or intermittent rotation
  • Common symptoms: drum won't spin, squealing or thumping noises, burning rubber smell, visible fraying/cracks
  • Slipping belt can leave clothes wetter than normal at cycle end
What's included: 1 drive belt Install notes:
  • Disconnect power and turn off water supplies before servicing
  • Access the belt from the rear or bottom; remove panels as directed in your model's service information
  • Release belt tension at the motor/idler, remove the old belt, and route the new belt over the drum and motor pulleys with ribs properly seated
  • Rotate the drum by hand to verify alignment; reassemble and test. Inspect the idler/tensioner and pulleys while open

Do-It-Yourself Stories from Customers like You My KenmoreElite washer wasn't spinning at appropriate times during various cycles kept giving me the "srv cll" message on the display   Gregg S. • Georgetown , KY • October 02, 2019

Since I hadn't found the Tech Sheet for the washer (which there should be one inside the top cover) I simply thought I'd buy the drive motor (and a new belt, a.k.a "cheap insurance"). Installed the motor once I'd received it from AppliancePartsPros, the washer worked a couple of cycles then gave me the same "SrV CLL" message. I didn't know how to access the error codes on this model but found the info in the Tech Sheet, so I checked it and got an E53 code. Since I'd replaced the motor... Read more

More
$49.95
Compare At:
$59.44
You Save:
$9.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Insulated Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10260319

This insulated belt secures the appliance's insulation blanket around the cavity, helping maintain proper temperatures and shielding surrounding components. Replace a torn, stretched, or missing belt to restore correct insulation retention and reliable performance.

  • Holds the insulation wrap in its designed position
  • Helps contain heat and reduce transfer to outer panels
  • Supports thermal efficiency and stable cavity temperatures
  • Common reasons to replace: belt frayed, stretched, or missing; insulation slipping out of place
What's included: 1 insulated belt Installation notes:
  • Disconnect power and allow the appliance to cool completely before servicing
  • Access the insulation area by removing panels or the unit from its enclosure as needed
  • Wear gloves and eye protection when handling fiberglass insulation
  • Route and secure the belt as originally installed; do not overtighten or compress insulation excessively

Do-It-Yourself Stories from Customers like You Belt   Jessica G. • Yucca Valley , CA • April 09, 2015

Replaced the belt and works GREAT Read more

More
$48.95
Compare At:
$57.76
You Save:
$8.81

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP95405

Made by Whirlpool. Fits most Whirlpool and Kenmore belt driven washers. Size: 1/2 inch x 47.5 inches long.

This part fixes the following symptoms
  • Burning smell
  • Will not drain
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Broken washer belt whirlpool imperial 70   Michael M. • Mesquite , TX • April 03, 2015

Very difficult fix even though I had done it once before about 15 years ago. Problem for me was getting the transmission down far enough to get clearance to install the belt. Model LA780P from the mid 80s. It started leaking transmission fluid and that worried and hurried me. I bought a newer washer but went back to this older style because they are repairable. New ones are disposable and I like the old porcelin. The only two parts that ever break are the belt and the pump, the pump being... Read more

More
$19.95
Compare At:
$28.39
You Save:
$8.44

IN STOCK
Ships Today Guaranteed
Add to Cart
Kenmore Belt - Washer 8004064
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303280326

 

This part fixes the following symptoms
  • Pumps but will not spin
  • Burning smell
See more...
Do-It-Yourself Stories from Customers like You The washer needed a new belt   Michael L. • Onancock , VA • February 23, 2015

My husband replaced the belt it was very simple just took the old one off and put the new one and.ordering the part on line was half the price of my local store and the part was here in just a couple of days. Read more

More
Best Seller
Kenmore Drive Belt
Genuine Frigidaire part
By: Frigidaire
Part Number: 134051003

The Drive Belt is an OEM part for Frigidaire washing machines. This part transfers the rotational force from the motor to the drum, enabling the tumbling action during wash cycles.

Causes of a bad Drive Belt include wear and tear over time, exposure to excessive heat or moisture, or physical damage from improper installation or foreign objects.

Symptoms of a faulty Drive Belt include:

  • Loud squeaking or grinding noises during the wash cycle
  • The drum not spinning or rotating properly
  • Slipping or failure to agitate during wash cycles
  • Excessive vibrations or shaking from the washer

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You No error codes; just lots of noise and movement   James S. • Winchester , TN • April 29, 2023

After a few days of our 16 YO Frigidaire Affinity front-loading washer (model ATF7000EG0) dancing around the room bellowing like an elephant in musth, I decided to fix it. Well, technically, my wife decided I would fix it. I postulated that the OEM tub suspension system was rapidly deteriorating, so I ordered the shock absorber kit (5304485917), three nylon pins (131268300), two suspension springs (134362800), and a new drive belt (134051003) for good measure. These parts all arrived in... Read more

More

Kenmore / Sears washer belt replacement parts are crucial for keeping your washer in top-notch condition. These belts essentially drive the functionality of the machine, making sure your laundry comes out clean and fresh every time you run a load. Think of them as the unsung heroes that keep everything churning smoothly in the background.

The washer belts ensure that the drum spins efficiently, allowing your clothes to be thoroughly washed and rinsed. With Kenmore / Sears washer belt replacement parts, you get to keep your appliance running just like it did on day one. Having high-quality replacement parts on hand is essential to avoid unnecessary downtime and keep your household running smoothly.

Opting for OEM Kenmore / Sears washer belt replacement parts ensures that you are getting parts that are specifically designed for your machine, guaranteeing the best fit and performance. These belts are made to the exact specifications of the original, maintaining the durability and reliability you've come to expect from your washer.

So, if you're in need of a new Kenmore / Sears washer belt, you can rest easy knowing that quality replacements are readily available. Each belt is crafted to help extend the life of your washer and ensure it performs optimally, making laundry day a breeze.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store