Kitchenaid Refrigerator Gasket & Seal

Color: Misty Beige

The Door Gasket is an OEM replacement part for Whirlpool side-by-side refrigerators. This flexible rubber sealing strip is adhered around the entire perimeter of the refrigerated compartment door. The gasket creates an air-tight barrier, preventing cool air from leaking out when the door is closed. 

Symptoms of a damaged door gasket include:

• Increased energy usage to maintain temperatures  
• Formation of frost or condensation around door edges
• Visible cracks or compressed areas impairing an air-tight seal

Causes often involve general wear from repeated door openings and closing cycles. Exposure to heat and light can also compromise the integrity of the adhesive bonding of the gasket over time.

This OEM Whirlpool replacement is compatible with Maytag, KitchenAid, and Jenn-Air refrigerators as well.

Color: White

The Door Gasket is an OEM part for Whirlpool refrigerators. It creates an efficient seal between the refrigerator door and cabinet to maintain optimal interior cooling temperatures and humidity levels. Made of durable yet flexible material, the door gasket surrounds the perimeter of the door opening and prevents warm air and moisture from seeping inside.

Causes of a bad door gasket include normal wear over time exposing the gasket to constant opening and closing of the door.

Symptoms of a failing gasket are:

• Difficulty keeping the door properly closed 
• Higher electric bills from the refrigerator running more often
• Items inside cooling improperly or becoming frozen on the edges
• Buildup of frost or condensation occurring inside

Color: White

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Kenmore models. Replace yours to restore effective insulation and energy efficiency.
 

This magnetic refrigerator door gasket forms the airtight seal between the door and cabinet to keep cold air in and moisture out. Replacing a worn gasket restores a tight seal for stable temperatures and reliable performance.

• Creates a magnetized, airtight seal around the door perimeter to prevent air leaks
• Helps maintain set temperatures and reduce condensation or frost around the door
• Supports consistent cooling and overall efficiency
• Common symptoms of failure: gaps or warping, torn corners, door not closing securely, moisture or frost at the door edge

• Disconnect power before servicing
• Allow the gasket to warm and relax; use warm water or a hair dryer on low to soften—do not overheat
• Remove the old gasket from the retainer and press the new gasket in, starting at the corners and seating evenly around the perimeter
• Check door alignment and retighten/adjust hinges as needed; verify seal with a paper slip test

This oven light lens gasket seals the lens to the oven liner, helping keep heat, steam, and grease out of the light housing. It maintains a secure fit for the lens and protects the bulb and wiring.

• Creates a heat-resistant seal between the light lens and oven cavity
• Helps block heat, steam, and grease from entering the light assembly
• Stabilizes the lens/retainer so the lens sits flush and secure
• Common signs of failure: torn/brittle gasket, lens feels loose, condensation or grease inside the lens, or scorching around the light opening

• Disconnect power at the breaker and allow the oven to cool completely before servicing
• Remove the lens retainer and lens to access the gasket; note orientation before removal
• Seat the new gasket evenly around the opening, then reinstall the lens and retainer without overtightening
• The lens sits flush and the seal is even after reassembly

Color: Black

This is the perimeter seal for the refrigerator's fresh food compartment door. It restores an airtight seal to keep cold air in and humid room air out, helping maintain temperature, reduce condensation, and improve overall efficiency.

• Seals the fresh food door opening to prevent air leaks
• Helps stabilize internal temperature and reduce run time
• Replace if torn, cracked, deformed, or not sealing evenly
• Symptoms can include condensation or moisture around the door, warm spots, frost near the door edge, or the door not closing fully

• Disconnect power; allow the door area and new gasket to warm to room temperature
• Soften the new gasket in warm water to relax bends before installation
• Remove the old gasket; seat the new one fully into the channel, starting at the corners—do not stretch
• Use gentle, low heat (hair dryer) to smooth waves; perform a "paper test" around the perimeter and adjust hinges if needed

Color: Black. Size: 23 3/4 inches x 31 1/2 inches. For white order WP12550116Q.

This refrigerator door gasket seals the door to the cabinet to keep cold air in and moisture out. Replacing a worn or deformed gasket restores a reliable seal, steadier temperatures, and more efficient performance.

• Creates an air-tight seal around the door perimeter
• Helps maintain correct temperatures and reduce frost or condensation
• Supports proper door closing and overall cooling efficiency
• Replace if the gasket is torn, cracked, warped, hardened, or leaves gaps; if the door pops open; or if you see moisture/frost along the door edge

• Disconnect power; remove items from the door bins for access
• Pull the old gasket from the retainer; transfer/loosen corner screws if applicable
• Warm the new gasket (hot water or low-heat hair dryer) to relax it; seat the lip evenly, corners first
• Close the door and check for uniform contact; adjust with gentle heat and by leveling/hinge alignment if needed; allow up to 24 hours for the gasket to fully conform

This ice dispenser chute gasket seals the opening at the freezer door's ice chute, helping block warm, humid air from entering. A proper seal reduces frost and moisture around the dispenser and helps keep ice from clumping near the chute.

• Seals the gap between the ice door/flapper and chute to limit air leaks
• Helps minimize frost, condensation, and ice buildup in the dispenser area
• Replaces a torn, flattened, or missing gasket that prevents a tight seal

• Disconnect power to the refrigerator before servicing
• Remove the dispenser front panel/escutcheon to access the ice door and chute area
• Remove the old gasket, clean the mating surfaces, and seat the new gasket evenly all around
• Ensure the ice door/flapper moves freely and seals uniformly before reassembly

Color: Grey

The Gasket-FIP (STL) is an OEM part for Whirlpool side-by-side refrigerators. This gasket fits around the fresh food evaporator inlet pipe inside the refrigerator. Its purpose is to form an airtight seal to prevent air leaks and increase efficiency.

Symptoms of a bad gasket include: 

• Higher than normal energy usage
• Formation of frost or ice buildup in unexpected areas 
• Temperature fluctuations inside the refrigerator or freezer compartments
• Strange odors coming from the refrigerator

Causes of a bad gasket can be wear and tear over time, cracks or tears in the sealing material, or improper installation that does not allow for a tight seal. 

This OEM Whirlpool replacement part is also compatible with Maytag, Jenn-Air, Amana, and some Kenmore models.

This freezer door gasket creates an airtight seal between the door and cabinet to keep cold air in and humidity out. A tight seal helps maintain proper temperatures and reduces frost buildup and energy loss.

• Seals the freezer door perimeter to prevent warm, moist air from entering
• Helps reduce frost/ice buildup and temperature swings
• Common failure signs: torn or warped gasket, gaps around the door, frost forming quickly, door not sealing unless pushed
• Restores proper door closure and sealing performance

• Unplug the appliance before service
• Soften the gasket in warm water or with a low-heat hair dryer to ease installation and improve fit
• Remove and reinstall retainer screws or press-in tabs as applicable; work evenly around the door
• Check door alignment and perform a dollar-bill test around the perimeter to confirm a uniform seal

This refrigerator door gasket creates a tight seal between the door and cabinet to keep cold air in and moisture out. Replacing a worn or torn gasket restores consistent cooling performance and helps prevent frost and condensation from air leaks.

• Forms an airtight seal around the door perimeter to contain cold air
• Helps maintain proper temperatures and humidity inside the refrigerator
• Reduces frost, condensation, and warm spots caused by leaking seals
• Typical signs of failure: tears, gaps, hardened/warped corners, or doors not sealing firmly

• Unplug the appliance before servicing
• Let the new gasket warm to room temperature; use warm water or a hair dryer on low to relax bends
• Press the gasket fully into the door channel and seat the corners evenly
• Close the door and check for uniform contact all around; allow time for the gasket to conform

This refrigerator door gasket forms an airtight seal between the door and cabinet to keep cold air in and humid air out. Replacing a worn gasket helps stabilize temperatures, reduce frost and condensation, and improve overall cooling performance.

• Seals the door perimeter to prevent air leaks
• Helps maintain set temperatures and humidity levels
• Reduces frost buildup and condensation around the door
• Common symptoms include rips/tears, warping, gaps, poor door seal, or visible moisture/frost at the door

• Disconnect power; let the interior warm slightly to soften the old gasket (or warm the new gasket in hot water)
• Pull the old gasket from the retainer/groove and clean mating surfaces
• Press the new gasket fully into the retainer, seating the corners first and working evenly around the door
• Use warm water or low heat to relax wrinkles; adjust door/hinges if needed

This refrigerator door gasket replaces a worn seal to restore a tight, even closure around the door. A proper seal keeps cold air in and moisture out, helping maintain temperature, reduce frost, and minimize run time. What it does:

• Forms a tight seal between the door and cabinet frame
• Helps maintain set temperatures and reduce moisture intrusion
• Resolves frost or condensation at the door and frequent compressor cycling
• Common signs: torn, cracked, or warped gasket; gaps; door not sealing smoothly

• Includes: 1 door gasket

• Disconnect power before servicing; remove or secure contents for safety
• On many models, loosen the inner-liner screws or pull the old gasket from the retainer/channel to remove
• Warm the new gasket (warm water or low heat from a hair dryer) to relax shipping folds
• Seat corners first, then press the rest into the retainer; verify seal with a paper-slip test and adjust as needed

Color: Apollo Grey