Need Help?
Call or text
This heater assembly warms the wash water inside the tub so the control can reach and maintain the selected temperature. Replacing a failed element restores proper heating performance and helps return cycle times to normal. What it does:
Fix slow filling, no-fill, or continuous filling issues by replacing a faulty water inlet valve. Straightforward 15-20 minute repair for most DIYers.
Replaced both water inlet valves. Very simple repair. I was most pleased that I diagnosed the problem correctly and was able to replace the valves within 15 mins. Very happy with myself! Read more
Shipping bolt secures the washer drum during transportation or relocation. Replace if lost, damaged, or missing from original installation to prevent damage.
AppliancePartsPros.com carefully looked up and provided the correct bolts required so the washer drum would not move during transport. Representative really took the time to make sure we had the right bolts. That was important to me...no matter how long it took! The bolts arrived the next day as promised...I had to expedite them due to time limitations. They worked liked a charm and I have run the washer without missing a beat! thanks soooo much! Read more
Replacement door handle for washer and washer-dryer combo units. Restores grip for opening and closing. Replace when cracked, broken, loose, or missing.
Watched YouTube, found and ordered part, unbolted door, lifted off catches, removed Phillips screws, split door panels, removed pivot pin, placed new handle properly (spring must be in same position as before), reversed - careful to get door catch spring into proper position while joining door halves. Took 1/2 hr. Read more
Secures the drum during washer transport or relocation. Replace missing, stripped, or damaged shipping bolts to prevent internal movement and damage while moving.
Washer won't spin or agitate properly? A worn stator disrupts the motor's magnetic field, preventing drum rotation. Moderate DIY repair restores spin.
Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.
I originally thought the washer had a bad bearing, but once I got it disassembled it the spider arms were broken. This required the replacement of the tub assembly. While replacing the tub I replaced all of the water bellows. The parts came quickly, the live chat and videos were very helpful. This washer has to be completely disassembled to replace the drum, so mark all the screw locations, tag and bag everything and take lots of pics. It was a very rewarding project and hundreds of dollars... Read more
Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.
I started by watching the video and it was very helpful. I would make one suggestion. On our model the weights on the tub sit very close to the front gasket. It is much easier to put the gasket on the tub before you put the weights on. Also, since the washer was tore apart, I replaced the hoses and seals and shocks since the machine is about 8 years old. The shocks made a huge difference. It spins like it did when it was new. Thanks for the video, it was very helpful. Read more
Replacement heater assembly for washers. Installs in the wash tub housing. Replace if cracked, leaking, or damaged. Includes integrated thermistor sensor.
I looked online ans read where the tE error code meant the thermistor was bad. I then found a video on YouTube showing how to replace the part. On AppliancePartsPros.com I chatted with a technician that told me the thermistor on my particular model was built into the heater unit and he gave me the link to purchase it. After it arrived via FedEx I followed the repair video and installed it myself (I'm a girl). So far I have run about a half dozen loads and no problems! Thank you so much... Read more
Plastic baffle inside the washer drum that lifts and tumbles laundry. Replace if cracked, broken, or missing to restore smooth operation and prevent snags.
My first step after realizing the loud noise came from the main bearing of our LG washer was to order the necessary parts for the repair that A.P.P. recommends. Using Appliance PartsPros.com as my main source for parts and video I began by watching Mitch repair a washer similar to ours. Mitch made it look easy enough and being a repair person myself I thought ok no issue here. So, following A.P.P's suggestions I ordered all the parts and added the main door gasket and spider. Note: The... Read more
Secures hoses and tubes in your washer to prevent leaks. Replace if rusted, corroded, or broken. Verify fit with your model number before ordering.
I followed a couple of Appliance Parts Pros videos that helped me identify the root cause, disassemble the washer, order the parts, how to install the new parts and reassemble. One of the difficult things was getting the replacement door boot gasket clamp back on. It will take two people (four hands) to get it on properly. Read more
This Screw (drawing) is a factory fastener used to secure appliance panels and components. Replacing a stripped, corroded, or missing screw restores a tight fit, reduces vibration, and helps keep assemblies correctly aligned.
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back... Read more
Replaces a frayed, melted, or damaged power cord on your washer. Restores grounded connection from wall outlet to internal power circuit.
Fix leaking from under the detergent dispenser with this washer dispenser box. Solves cracks or breaks that compromise the dispenser structure.
A new deteerrgent dispenser. Read more
Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.
Replacement Read more
Multi-wire harness connects washer control system to components. Replace if harness is damaged, burnt, or has broken wires affecting power distribution.
I replaced a rotor position sensor switch and harness. It was a simple repair. Tools required cross tip head screwdriver, 10mm and 17mm socket, and rachet. Also had o replace 2 zip ties that held the harness in place. Prior to repair, I watched a video on Appliance Parts Pros website. It was very helpful and informative. One last thing, the persons who answer the calls are very helpful. Read more