Need Help?
Call or text
Fixes burners that won't ignite, constant sparking when turned off, or igniters that spark when other burners are on. Direct replacement, basic tools needed.
I replaced the burner switches, since we had been having trouble with specific burners igniting unless another burner was tuned on. Then I replaced the spark module since the flame and the burner being turned off were not being detected and burners would not re-light if the flame went out. Read more
Fix a downdraft fan that won't turn off, runs sluggishly, or fails to start with this cooktop fan switch. DIY-friendly repair with basic tools.
This replacement part looks nothing like the original because the original is two parts, the replacement is one part. The original has a switch with 3 wires coming out of it that go into a "block" screwed to the bottom tray. And this "block" has 2 wires that come out of it going to the fan. With the replacement, the block is eliminated and the 2 wires go directly to the switch. Easy install. Read more
Fix a burner that won't heat, sparks continuously, or doesn't respond to knob settings. This switch restores proper temperature control. 30-minute DIY repair.
Fix cooktop electrical failures or unresponsive controls with this wire harness. Restores power and signal connections between components.
Burner won't adjust heat or jumps to full power? This infinite switch restores variable temperature control to surface burners. DIY install in 30 minutes.
Being cautious, I ordered new burner controls (infinity switches) for the front two burners. I installed them and was very happy with the results. The new controls allowed me to increase or decrease the amount of heat without what you might call thermal runaway (A sudden switch to full-on). Encouraged, I ordered two more burner controls and installed them for the back two burners. I have not yet tested them extensively, but I am confident that I now have four functioning burners. Read more
Fix a gas burner that won't light with this igniter switch. Controls the spark signal when you turn the knob. Moderately easy DIY repair.
If your cooktop burner won't heat, stays on one setting, or heats erratically, this control switch regulates power to restore proper temperature selection.
Replaced switch on the gas valve. Read more
If your cooktop won't respond to knob turns or cycles won't select properly, this rotary control switch restores tactile control. Moderate DIY repair.
Burner won't heat or stays on high? This infinite switch controls top burner temperature settings. Restores precise heat adjustment to your cooktop.
Fix a cooktop burner that won't light with this spark igniter switch. Solves clicking but no ignition issues. Moderate DIY repair, typically 30-45 minutes.
Fix a cooktop that won't spark or light with this igniter switch harness assembly. Connects spark modules to burner igniters for reliable ignition.
Burner won't heat or lacks variable control? This infinite switch restores stepless temperature adjustment to electric range surface burners. Moderate DIY.
Unscrewed the glass top and replaced the switch. Read more
Fix a burner that won't heat or won't turn off with this cooktop burner control switch. Most DIYers complete this repair in under 30 minutes.
Exhaust fan won't turn off or stuck on? This rocker switch restores reliable blower control. Simple 5-minute fix—just disconnect wires and snap in new.
SSVD48600Pon finally popped the control panel loose from the top of the stove. Took some manipulation as the stove is more than 20 yrs. old With a screwdriver finally popped the switch loose. Applied the new switch. Popped the top back to the control panel. Put the screws back in and everything was back to normal. Read more
Usually ships within 4 - 14 days
Burner stuck on high or won't adjust temperature? This infinite switch restores variable heat control to electric cooktop surface burners. DIY repair.
Burner won't heat or stays on high? This infinite switch controls element temperature settings. Direct-fit replacement restores precise heat control.