Maytag Dishwasher Axle, Roller, Pulley Parts

The Adjuster Axle is an OEM part for Whirlpool dishwashers. It plays a crucial role in the height adjustment mechanism of the upper rack, allowing users to customize the rack's position to accommodate different dish sizes. This axle ensures that the adjustment is smooth and stable, providing flexibility in the dishwasher's loading capacity.

You should replace the adjuster axle if it becomes worn out or damaged. Causes of a bad adjuster axle can include wear from frequent adjustments, breakage from overloading the rack, or damage from mishandling.

Symptoms of a bad adjuster axle include:

• Difficulty in adjusting the height of the upper rack
• The rack not staying in the desired position
• Unusual movement or instability of the rack
• The adjuster mechanism not functioning properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This upper rack wheel assembly helps the dishwasher's upper dishrack roll in and out smoothly. Replacing a worn wheel restores proper rack movement and prevents jamming that can stress the adjuster and rails.

• Allows the upper rack to glide smoothly on the rail
• Helps correct a sticking, wobbly, or uneven upper rack
• Can reduce grinding or squeaking noises when sliding the rack
• Address difficulty fully extending or retracting the upper rack

• Disconnect power and turn off water before servicing
• Pull the upper rack out; release the rack end stops as directed in your model's service info
• Swap the old wheel assembly for the new one; ensure it locks securely to the rack or adjuster
• Reinstall end stops and test rack travel before restoring power

This dishrack wheel lets the dishwasher rack glide smoothly in and out. Replacing a worn or broken wheel restores easy rack movement and helps keep the rack aligned during loading and unloading.

• Provides rolling support for the dish rack inside the rail/track
• Helps keep the rack level and properly aligned
• Common symptoms include rack hard to slide, wobbling/sagging rack, or a cracked/missing wheel
• Can reduce scraping or clicking noises when moving the rack

• Disconnect power before servicing; remove the rack from the tracks as needed
• Release the old wheel from its axle/retainer; note its orientation
• Snap the new wheel onto the existing axle/retainer and ensure it spins freely
• Reinstall the rack and test for smooth operation

The Dishrack Roller and Axle Assembly is an OEM part for Whirlpool dishwashers. This part facilitates the smooth movement and operation of the upper dishrack inside the dishwasher tub.

Causes of a bad Dishrack Roller and Axle Assembly may stem from wear and tear over time, damage from misuse or improper loading, or debris accumulation hindering the rollers' movement.

Symptoms of needing to replace the Dishrack Roller and Axle Assembly can include:

• Difficulty in sliding the dishrack in or out of the tub
• Excessive noise or grinding sounds when moving the dishrack
• The dishrack becoming stuck or not rolling properly on the track

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This wheel mounting strip secures the rack rollers to the dishwasher rack, keeping the rack aligned and rolling smoothly in and out. Replacing a worn or broken strip restores proper rack support and slide action.

• Holds multiple rack wheels in position along the rack edge
• Helps prevent sagging, binding, or uneven rack movement
• Common fix for racks that derail, feel wobbly, or won't roll smoothly
• Durable molded piece designed for the rack's wheel row

• Disconnect power and water before servicing
• Remove the rack, then transfer wheels from the old strip to the new one
• Snap or fasten the strip to the rack as designed; verify wheel rotation
• Check rack travel on both rails before returning to service

This wheel mount assembly fits the dishwasher's upper rack track and provides the roller that lets the rack glide in and out. Replacing a worn or broken mount restores smooth movement and keeps the rack aligned on the rails. What it does:

• Supports and guides the upper rack along the side rails
• Replaces cracked, missing, or seized rollers that make the rack hard to slide
• Helps prevent the rack from popping off the track or sitting unevenly
• Can reduce scraping or squeaking noises when moving the rack

• One upper rack wheel mount assembly

• Disconnect power to the dishwasher before servicing
• Open the door and remove the upper rack by releasing the rail stops
• Depress the locking tab to remove the old wheel mount from the rail; align and snap the new assembly into place
• Reinstall the rack and rail stops; check for smooth rack travel

Dishwasher rack mounting strip roller.

Color: light gray. Measures about 3 inches high by 6 inches deep.

Right Side. For left side use part number WPW10251050.

Attaches to the inner tub for the upper rack

This rear support wheel replaces a worn roller that helps a sliding drawer or rack glide smoothly and stay aligned. Restores easy, even movement and reduces dragging, scraping, or tilting during everyday use.

• Supports the rear of a sliding assembly on its track
• Provides smooth rolling action and helps maintain alignment
• Helps prevent binding, popping off the track, or uneven travel
• Replace if the wheel is cracked, flattened, missing, or if movement is noisy or difficult

• Disconnect power before servicing; allow the appliance to cool
• Remove the sliding assembly to access the wheel area
• Transfer or reinstall any axle/retainer from the original wheel as needed
• Verify smooth travel and proper alignment after replacement

Left side. For right side use part number WPW10251051.

This upper rack wheel and axle assembly lets your dishwasher's top rack glide smoothly and stay level. Replace a cracked or missing wheel to fix hard-to-slide racks, scraping noises, or a rack that slips off the rail.

• Provides rolling support for the upper rack along the rails
• Helps keep the rack aligned to prevent sagging or derailment
• Replaces worn, cracked, or seized wheel assemblies
• Common symptoms: rack hard to slide, wheel wobbles/missing, grinding or scraping sounds, rack coming off track

• Disconnect power to the dishwasher for safety
• Pull out the upper rack and remove the rail end caps if needed
• Release and remove the damaged wheel/axle assembly from the rack
• Snap the new assembly into place, reinstall end caps, and test rack movement

Used on the upper dishwasher dishrack.

The Dishrack Wheel is an OEM part for Whirlpool dishwashers. Each wheel works to smoothly guide the upper dishrack in and out of the dishwasher for convenient loading and unloading of dishes.

Causes of a bad wheel can include normal wear and tear from years of use or warping/bending due to overloading of the dishrack.

Symptoms of a bad dishrack wheel include:

• Noisy operation of the dishrack as it moves
• Difficulty fully extending or retracting the rack
• Binding or jamming that prevents smooth travel

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This tub wheel mount secures the rack support roller to the dishwasher tub wall so racks roll smoothly. Replace a cracked or loose mount to restore smooth rack movement and prevent binding or sagging during loading and unloading.

• Secures the tub roller/wheel to the dishwasher's inner tub wall
• Provides a stable point so the rack glides smoothly on its track
• Helps keep the rack level and properly aligned
• Common symptoms: rack hard to slide, tilts or drops, scraping/grinding when moving the rack

• Disconnect power and water supply before servicing
• Pull the rack forward to access the mount on the tub sidewall
• Remove the retaining fastener or release locking tabs, then install the new mount in the same orientation
• Ensure the wheel engages the track and test rack travel for smooth operation