Need Help?
Call or text
If your oven won't reach temperature or broiler stopped working, the broil element may have failed. This part restores top heat for broiling. DIY-friendly.
I did some research on the internet to find the part I needed. I came upon your web site Applianceparts pros.com and watched you videos. After watching your video on how to replace the broiler element, I ordered the broiler element. It came in a few days. I replaced the broiler element with my 12 year old son's help (always use every opportunity to teach my kids) in 50 minutes. Plugged the oven and turned on the broiler. As my 12 year old said "it works." Thank you for the easy how to... Read more
Burner not heating or heating unevenly? This 8-inch surface element kit restores even heating on your electric range. Simple plug-in install in 15 minutes.
I got online to research what the problem could be and came to realize the infinite switch had probably shorted out when the element broke. While looking for the part I came across an appliancepartspro video that showed me exactly how to replace the switch. I ordered the switch from applicancepartspros.com, which arrived in two days! I watched the video again while installing the part and had it done in less than 30 minutes. The hardest part was lining up the end caps as I put the stove... Read more
If your cooktop burner won't heat or only partially heats, this radiant surface element restores consistent heating. Most DIYers complete in 45-60 minutes.
I replaced both the element and the switch. It was a relatively easy fix, although I needed a second set of hands to hold the stovetop upright while I did the replacement. The entire job took about 45-60 minutes. Read more
This part is a grill element that is used on a cooktop. The element is responsible for supplying heat to the cooking area of the cooktop. If the element is not lighting up orange or red when it is turned on, it will need to be replaced. This part may need
Ordered all the parts needed, replaced them and the Jenn Air worked just fine. Read more
Range burner not heating? This 8-inch surface element restores even heating to your cooktop. Simple plug-in replacement takes under 10 minutes with no tools.
I unplugged the old, plugged in the new, and started cooking. Read more
Burner won't heat or has cold spots? This surface heating element restores reliable, controllable heat to your cooktop. Direct-fit replacement.
The replacement element included extensions to make the wires long enough. Read more
Radiant surface element for smooth-top electric ranges that restores consistent heat to a 6-inch burner so cookware can reach and maintain proper cooking temperatures. Ideal when a burner fails to heat evenly or stops working. What it does:
Good info on the webpage. Took me about one hour to repair which is longer than expected but that included cleaning up the pans and rock which was overdue. Here is the process: 1)Turn off breaker and verify no power; 2) remove cooking grates, rocks, and steel grates from both sides (for access and weight reduction); 3) remove a total of 10 Phillips screws from inside the pans on both sides (8) and the temp control knob box; 4) Now you can raise the pan so you can access the nuts from the... Read more
Burner won't heat or only works on one setting? This surface heating element restores even heat to your cooktop. Simple plug-in replacement.
Ordered a new one from appliance pro got it fast and put it in work's great. Read more
Fix a broiler that won't heat or a melted element. This range broil element delivers direct radiant heat at the top of your oven during the broil cycle.
Replaced the element. Read more
Burner won't heat or stays on high? This dual radiant surface element restores proper heating. DIY-friendly repair—lift cooktop, disconnect wires.
Found videos on youtube that showed how to do the job. Read more
Range not broiling or browning food evenly? A failed broil element is the likely cause. This radiant heating coil restores strong, even heat for searing.
Replaced with new ones ordered from your company Read more
Broiler not heating or browning food properly? This upper broil element restores intense top heat for even broiling. Takes 15-20 minutes to replace.
Burner won't heat or heats unevenly? This surface heating element restores reliable heat to your electric cooktop. Moderate DIY repair in 30-60 minutes.
Replaced with new burner. Read more
Oven won't heat or maintain temperature? A failed bake element causes uneven cooking and long preheat times. This lower heating element restores consistent heat.
Bake element def. replaced with new and now works great. Read more
Burner won't heat or develops hot spots? This radiant surface element restores steady, controllable heat to glass-ceramic cooktops. DIY repair in 1-2 hours.
When the burner failed to come on, I was not sure if it was the burner or the control unit. After doing some research on line, I learned how to test both components. Removing an disassembling the cook top was easy. I quickly identified that the burner failed. Testing it will a multi-meter showed a break in the burner element. I then checked on line for a replacement burner element. The prices ranged greatly, by more than $50. I ordered from ApplicancePartsPros.com. The burner element... Read more
Broiler not heating or element burned out? This upper oven broil element restores intense radiant heat for broiling. Simple plug-in installation.
Turned the power off. Lifted the oven door up and off.to make access easier and to clean an replace gasket.Then unscrewed the element brackets. Cleaned oven. Took oven door apart to replace gasket ,you have to separate the door halves to clean window and get the gasket out. This is where you better take pictures and notes. You need a large work bench and a good #2 Phillips. Taking the elements out you will deal with gouged out screws, rust stripped threads etc. You may need to buy some self... Read more