Maytag Range Heating Element

• Little to no heat when broiling

Ordered a new one. Read more

• Little to no heat when broiling

I wanted to get the upper oven baking element replaced; it hasn't been working for a few months. This double oven has had two other issues, there is a fan that comes on to cool the electronics panel, That fan has made excessive noise and it operates for 2-3 hours after the oven turns off. The other problem with the oven is the Self-Cleaning feature runs for about 15-30 minutes and then turns off with an error code. I've had a local appliance repair person in to address the error code and... Read more

Only the lower element was burned out, but I opted to replace both. Ordered from AppliancePartsPros and received them very quickly! A few screws, unplug and plug in the new elements, replaced the screws, and DONE! This has to be one of the easiest repairs a homeowner can do. Thanks, AppliancePartsPros for carrying the original equipment parts and providing the fast shipping! Read more

The instructions that came with the replacement smaller surface heating element provided no help about how to open the top of the range, so I checked the internet. I found several videos on replacement of surface elements in flat top ranges, but none for our particular range, so I Google-searched a simple question, “How to open the top of a 6898VVD Magic Chef range”. The AI Overview answer had several points, most of them not useful, except for the last one: “Hidden Clips: There might be... Read more

Little procrastination paid off. With only 50% capability I knew it is time to call the appliancepartspros. They shipped me parts within 3 days. It was practical to fix both at the time. All I needed was to disconnect power at range breaker box, grab a screwdriver to lift top open, a 16 inch or so piece of old 2×4 wood to keep the top top of stove lifted, so I could access heating elements from underneath. Then I took my black sharpie And marked location of mounting screws and... Read more

• Little to no heat when baking

The delivery of the element was superfast, less than 24 hrs. Unplug the Stove from the receptical! Took a phippips screwdriver and took out the 2 screws holding it, and tilted it upwards a bit and pulled the element out about 3 inches an unhooked the wires. Hooked the wires up to the new element and pushed it back into the holes and put the 2 screws back in and turned the stove on and that was all there was to that. Read more

• Little to no heat when broiling

Looked on parts website for easy to follow YouTube video Read more

• Element will not heat

Not really a repair, just needed to update some parts that were worn out. Drip pans were perfect and I am so glad to have found them on this location. Read more

Open oven door removed 2 screws to lift up top then remove 1 screw at back of burner assy to let right side burner assy drop down to replace then remove wires be sure to write down where wires go look on bottom side for location of wire plugs new burner plugs may be located in different location mine was then install new burner assy Read more

Bought replacement burner receptacles. Cut off the old ones, used wire nuts to connect replacements. Read more

I purchased the replacement element. The element was a direct replacement. The entire replacement took 20 minutes, 15 minutes of which was to clean the range before putting it back. Read more

One of the heating elements of the stove was burnt. After removal of two screws under the ceramic glass, I replaced the 2500 w heating element (8 inch size). Read more