Maytag Refrigerator Gasket & Seal

Color: Black

This door gasket seals the dishwasher door opening to keep wash water and moisture inside the tub. A fresh, flexible seal helps prevent leaks and improves cleaning performance by maintaining proper pressure and heat.

• Creates a watertight seal between the tub and door perimeter
• Helps prevent leaks at the bottom and sides of the door
• Helps resolve symptoms like water on the floor, moisture around the door, long dry times, or visible tears/flattening of the old gasket
• Restores proper door compression and wash chamber containment

• Disconnect power and turn off water supply before service
• Remove the old gasket from the channel; clean the groove of debris and residue
• Press the new gasket evenly into the channel, centering at the top and working down both sides
• Close the door to help seat the gasket; a short run cycle may help it conform

This freezer door gasket creates a tight seal around the door opening to keep cold air in and humidity out. Replacing a worn gasket restores proper door closure, helps prevent frost buildup, and supports consistent freezer temperatures.

• Forms an air-tight perimeter seal to minimize air leaks and moisture intrusion
• Helps resolve frost/ice buildup and sweating/condensation around the door
• Can improve temperature stability and reduce excessive run times caused by air leaks
• Common fix for doors that won't seal or when the old gasket is cracked, torn, or shrunken

• Disconnect power and clear items from the door before starting
• Warm and relax the new gasket (lay flat or soak in warm water) for easier installation
• Fit the corners first, then work evenly along the sides for a uniform seal
• If your model uses a retainer or screws, loosen and re-tighten evenly; check door alignment and perform a "dollar-bill" test

Color: Grey

Color: Misty Beige

The Door Gasket is an OEM replacement part for Whirlpool side-by-side refrigerators. This flexible rubber sealing strip is adhered around the entire perimeter of the refrigerated compartment door. The gasket creates an air-tight barrier, preventing cool air from leaking out when the door is closed. 

Symptoms of a damaged door gasket include:

• Increased energy usage to maintain temperatures  
• Formation of frost or condensation around door edges
• Visible cracks or compressed areas impairing an air-tight seal

Causes often involve general wear from repeated door openings and closing cycles. Exposure to heat and light can also compromise the integrity of the adhesive bonding of the gasket over time.

This OEM Whirlpool replacement is compatible with Maytag, KitchenAid, and Jenn-Air refrigerators as well.

Color: White. Size: 31 1/2 inches 41 inches. For black order WP61004017.

This white door gasket seals the perimeter of the refrigerator door. It helps keep cold air in and humid air out, supporting stable temperatures and reducing frost and moisture around the door opening. What it does:

• Maintains an airtight seal between the door and cabinet
• Replaces a torn, cracked, shrunken, or deformed gasket that won't seal
• Helps address condensation around the door, frost/ice buildup, temperature fluctuations, or a door that won't close flush

• 1 door gasket (white)

• Unplug the appliance before servicing
• Warm the new gasket (soak in warm water or use low, indirect heat) to relax kinks for easier fit
• Start at the corners and work evenly around the door; on screw-retained liners, loosen screws, seat the gasket lip, then retighten
• Close the door and check the seal; smooth out waves and allow the gasket to conform over the next 24 hours

This magnetic refrigerator door gasket forms the airtight seal between the door and cabinet to keep cold air in and moisture out. Replacing a worn gasket restores a tight seal for stable temperatures and reliable performance.

• Creates a magnetized, airtight seal around the door perimeter to prevent air leaks
• Helps maintain set temperatures and reduce condensation or frost around the door
• Supports consistent cooling and overall efficiency
• Common symptoms of failure: gaps or warping, torn corners, door not closing securely, moisture or frost at the door edge

• Disconnect power before servicing
• Allow the gasket to warm and relax; use warm water or a hair dryer on low to soften—do not overheat
• Remove the old gasket from the retainer and press the new gasket in, starting at the corners and seating evenly around the perimeter
• Check door alignment and retighten/adjust hinges as needed; verify seal with a paper slip test

Color: White

The Door Gasket is an OEM part for Whirlpool refrigerators. It creates an efficient seal between the refrigerator door and cabinet to maintain optimal interior cooling temperatures and humidity levels. Made of durable yet flexible material, the door gasket surrounds the perimeter of the door opening and prevents warm air and moisture from seeping inside.

Causes of a bad door gasket include normal wear over time exposing the gasket to constant opening and closing of the door.

Symptoms of a failing gasket are:

• Difficulty keeping the door properly closed 
• Higher electric bills from the refrigerator running more often
• Items inside cooling improperly or becoming frozen on the edges
• Buildup of frost or condensation occurring inside

Color: White

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Kenmore models. Replace yours to restore effective insulation and energy efficiency.
 

Color: Black

Color: Black

This refrigerator door gasket seals the door to the cabinet to keep cold air in and moisture out. Replacing a worn or deformed gasket restores a reliable seal, steadier temperatures, and more efficient performance.

• Creates an air-tight seal around the door perimeter
• Helps maintain correct temperatures and reduce frost or condensation
• Supports proper door closing and overall cooling efficiency
• Replace if the gasket is torn, cracked, warped, hardened, or leaves gaps; if the door pops open; or if you see moisture/frost along the door edge

• Disconnect power; remove items from the door bins for access
• Pull the old gasket from the retainer; transfer/loosen corner screws if applicable
• Warm the new gasket (hot water or low-heat hair dryer) to relax it; seat the lip evenly, corners first
• Close the door and check for uniform contact; adjust with gentle heat and by leveling/hinge alignment if needed; allow up to 24 hours for the gasket to fully conform

This ice dispenser chute gasket seals the opening at the freezer door's ice chute, helping block warm, humid air from entering. A proper seal reduces frost and moisture around the dispenser and helps keep ice from clumping near the chute.

• Seals the gap between the ice door/flapper and chute to limit air leaks
• Helps minimize frost, condensation, and ice buildup in the dispenser area
• Replaces a torn, flattened, or missing gasket that prevents a tight seal

• Disconnect power to the refrigerator before servicing
• Remove the dispenser front panel/escutcheon to access the ice door and chute area
• Remove the old gasket, clean the mating surfaces, and seat the new gasket evenly all around
• Ensure the ice door/flapper moves freely and seals uniformly before reassembly

Color: Grey

The Gasket-FIP (STL) is an OEM part for Whirlpool side-by-side refrigerators. This gasket fits around the fresh food evaporator inlet pipe inside the refrigerator. Its purpose is to form an airtight seal to prevent air leaks and increase efficiency.

Symptoms of a bad gasket include: 

• Higher than normal energy usage
• Formation of frost or ice buildup in unexpected areas 
• Temperature fluctuations inside the refrigerator or freezer compartments
• Strange odors coming from the refrigerator

Causes of a bad gasket can be wear and tear over time, cracks or tears in the sealing material, or improper installation that does not allow for a tight seal. 

This OEM Whirlpool replacement part is also compatible with Maytag, Jenn-Air, Amana, and some Kenmore models.

This freezer door gasket creates an airtight seal between the door and cabinet to keep cold air in and humidity out. A tight seal helps maintain proper temperatures and reduces frost buildup and energy loss.

• Seals the freezer door perimeter to prevent warm, moist air from entering
• Helps reduce frost/ice buildup and temperature swings
• Common failure signs: torn or warped gasket, gaps around the door, frost forming quickly, door not sealing unless pushed
• Restores proper door closure and sealing performance

• Unplug the appliance before service
• Soften the gasket in warm water or with a low-heat hair dryer to ease installation and improve fit
• Remove and reinstall retainer screws or press-in tabs as applicable; work evenly around the door
• Check door alignment and perform a dollar-bill test around the perimeter to confirm a uniform seal