Microwave Grille

Color: Biscuit. For stainless model order 8184608. For black model order 8183851 For white model order 8183948. This grill mounts above the door and the control panel.

White

This replacement Grille Assembly restores a clean, secure front cover for your appliance's vent/intake area. It helps protect internal components and maintain proper airflow while returning the unit to a finished, like-new appearance.

• Covers and protects the vent/intake opening at the front of the unit
• Helps maintain correct airflow through the appliance
• Replaces a cracked, warped, or missing grille that won't stay secured
• Can reduce rattling or vibration noises from broken tabs or a loose fit
• Restores the factory look and fit

• Disconnect power before servicing.
• Remove mounting screws/clips and support the grille while releasing tabs.
• Reuse existing hardware; align tabs and position the new grille, then secure.
• Tighten screws snugly—do not overtighten—and confirm proper alignment and clearance.

This vent grille covers the front/top vent opening and directs airflow, restoring a clean finished look and proper ventilation when the original grille is cracked, warped, or missing. Replace damaged louvers or broken mounting tabs to keep air moving correctly.

• Covers the vent opening and channels exhaust/cooling air away from the cabinet
• Helps protect internal components from debris while allowing proper ventilation
• Common symptoms: cracked or broken louvers/tabs, grille won't stay secured, rattling/vibration, reduced venting, cosmetic damage
• Restores the appliance's appearance and airflow path

• Disconnect power at the breaker before servicing
• Open the door; remove any retaining screws along the top, then slide the grille to release per your model
• Align tabs/clips and reinstall screws carefully; do not overtighten to avoid cracking
• Verify vents are unobstructed after installation

This vent grill covers the appliance vent opening to direct exhaust airflow and protect internal components. Replacing a damaged or missing vent grille restores proper ventilation and improves the unit's appearance. What it does:

• Directs hot air and exhaust from the oven/range cavity to the external vent path.
• Shields internal parts from large debris, grease buildup and accidental contact.
• Commonly replaced when cracked, warped, loose, broken, or cosmetically worn.
• Helps maintain consistent airflow to reduce heat buildup behind the control area.

• Disconnect power (and gas if applicable) before beginning any service.
• Typically secures with screws or snap clips; a screwdriver may be required for removal and installation.
• Handle edges carefully—metal parts may be sharp.
• Replace fasteners before reassembly.

This white vent grille covers the front ventilation opening of the appliance, providing a finished look while allowing proper airflow. Replace a cracked or missing grille to restore appearance and ensure the vent opening is correctly protected.

• Directs air through the front vent opening while shielding internal components
• Restores secure fit when tabs or mounting points are broken
• Replaces grilles that are cracked, warped, discolored, or missing
• Can reduce rattling or vibration caused by a loose or damaged grille

• Disconnect power before servicing to prevent electrical hazard
• Remove the screws or clips securing the existing grille; release any retaining tabs
• Align the new grille with the mounting points, engage tabs, and secure with existing fasteners
• Verify the grille sits flush and does not obstruct airflow

This grill vent replaces a worn or damaged vent trim that helps direct heat and airflow from the grill/broiler area. Restores proper venting appearance and helps prevent heat buildup behind the control panel. What it does

• Directs heat and exhaust from the grill/broiler area to the oven vent path
• Replaces cracked, warped, or broken vent trim that can catch grease or obstruct airflow
• Helps restore correct clearance and appearance around the grill opening
• Can reduce heat transfer to nearby control components when installed correctly

• Disconnect power to the appliance before starting any repair
• Access generally requires removing the oven or range top and control panel—follow OEM instructions
• Handle edges carefully; use proper tools to avoid scratching surrounding surfaces
• If vent is fastened with clips or screws, keep hardware and reinstall in original locations

This oven grille trims the front of the range or built-in oven, restoring a finished appearance and helping direct airflow. Replaces a damaged or missing front trim to improve fit and finish. What it does:

• Covers and protects the gap between the oven cavity and control/face trim
• Directs vented airflow away from the control area for proper airflow routing
• Restores the oven's factory appearance when original grille is cracked, warped, or discolored
• Helps prevent small debris from entering the vent opening

• One grille trim piece

• Designed for direct replacement; verify fit to your specific model before installation
• Remove power to the appliance before beginning any removal or installation
• Use appropriate hand tools and avoid over-tightening fasteners to prevent cracking

This grille assembly replaces a damaged or missing vent trim to restore a clean, finished appearance and help direct airflow. It snaps or screws into place for a secure fit and visible cosmetic repair. What it does:

• Covers and protects the vent/air opening while improving the appliance's appearance
• Helps channel airflow from the vent area for proper exhaust or intake
• Prevents large debris from entering the vent opening and interfering with components
• Fixes symptoms such as cracked, broken, loose, or missing front/vent trim

• Disconnect power to the appliance before attempting removal or installation.
• Most installations require removing a few screws or releasing retention clips; keep fasteners for reuse.
• Handle carefully to avoid scratching the finish; align tabs or screw holes before tightening.

Color: Universal Silver

Color: Black

Grille assembly replaces the front vent and control-area trim on your range or oven, restoring a clean appearance and directing exhaust airflow. Ideal when the original grille is cracked, bent, loose, or missing. What it does:

• Covers the front vent/control area for a finished, factory look.
• Replaces cracked, dented, loose, or missing grille pieces that cause visible damage or rattling.
• Helps direct exhaust airflow out of the vent opening and keeps the area tidy.
• Uses the appliance's original mounting points for a direct replacement.

• Always disconnect power to the appliance before beginning any repairs.
• Installation typically requires removing the lower access panel or control trim to reach mounting screws/clips.
• Use common hand tools; handle the grille gently to avoid scratching the finish.

This grille assembly replaces the refrigerator's lower kickplate to restore proper airflow and give the front a finished look. It helps protect internal components while keeping the appliance visually complete. What it does:

• Covers and protects the condenser area and components behind the lower front of the appliance
• Allows proper airflow at the cabinet base to support cooling performance
• Restores the appliance's appearance when the original grille is damaged or missing
• Helps keep pets, debris and small objects out of the lower service area

• Disconnect power to the appliance before beginning work
• Typically secures with screws or retaining clips along the toe-kick; keep hardware from the original part if present
• Align mounting tabs and engage clips/screws without forcing to avoid breakage

This grill vent replaces the front vent grille that directs airflow and covers the oven/range vent opening for a clean appearance. It restores proper airflow routing and keeps debris out of the vent area. What it does:

• Covers and protects the appliance vent opening while directing exhaust airflow
• Helps prevent grease and food debris from entering internal vent passages
• Worn, cracked or missing vents can cause visible gaps, rattling or trapped odors
• Restores the appliance's finished appearance and helps maintain proper ventilation

• Disconnect power to the appliance before starting any repair
• Handle part carefully to avoid scratching the finish; a non-marring tool may be helpful
• Installation usually requires removing the lower access panel or front trim—keep fasteners organized