Microwave Motor

This replacement motor restores reliable rotation to the component it drives, helping your appliance circulate air or operate as designed. Replacing a worn motor can resolve no-start conditions, loud operation, and weak performance.

• Provides the rotational drive for the attached component, enabling proper airflow or movement
• Common failure symptoms include humming without turning, intermittent operation, seized shaft, or grinding/squealing noises
• Visual signs like burned windings, cracked housing, or excessive shaft play also indicate replacement is needed

• Disconnect power to the appliance before servicing; allow any moving parts to stop completely
• Photograph or label wire positions and transfer them to the new motor one-for-one
• Reuse existing mounting hardware and verify the motor and attached wheel/blade spin freely without rubbing
• After installation, restore power and test operation before final reassembly

This replacement motor restores the rotation your appliance relies on to move air or drive a mechanism, bringing normal operation and performance back when the original motor has failed or become noisy. What it does:

• Converts electrical power into controlled shaft rotation to drive the associated component
• A failing motor may cause no movement, intermittent operation, or unusual humming/grinding noises
• Can contribute to reduced performance if the driven part doesn't run as intended
• May present with overheating smell or visible signs of wear on the old unit

• One motor

• Disconnect the appliance from power before servicing
• Note wire locations and connector orientation; transfer any brackets, grommets, or hardware from the old motor
• Handle sheet-metal edges carefully; wear cut-resistant gloves
• After installation, confirm the shaft spins freely by hand before restoring power and testing

This ventilation motor drives the vent fan to remove smoke, steam and cooking odors from the range hood assembly. It restores proper airflow so the ventilation system can clear air more effectively during use. What it does

• Replaces a worn or failed vent fan motor so the hood or microwave exhaust regains suction.
• Helps stop symptoms like no airflow, weak exhaust, or unusual motor noise during vent operation.
• Works with the fan/blower assembly to move air through the vent duct and filters.
• Matches OEM function and mounting so it integrates with the existing blower housing.

• One motor-ventilation (single motor unit)

• Install only with the appliance unplugged or power turned off at the breaker.
• Handle the motor and wiring harness carefully; reconnect all plugs and fasteners exactly as removed.
• Verify fan spins freely after installation before reassembling covers or panels.

The Tray Motor is an OEM part for GE microwaves. It is the component responsible for smoothly rotating the turntable tray during operation. A functioning tray motor ensures even heat distribution for consistent cooking results. 

Causes of a bad tray motor can include wearing of internal bushings or bearings, defects in the windings, or damage from liquid intrusion over time.

Symptoms of a bad tray motor include: 

• Turntable tray not spinning or rotating unevenly
• "Turntable On" indicator blinking or remaining constantly lit  
• Burnt or cold spots on cooked food items
• Loud grinding or clicking noises coming from inside

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore microwave models. 

A direct-replacement circulating motor that moves air inside the refrigerator cabinet to help maintain even temperatures and consistent cooling. Replacing a worn motor restores airflow and can reduce warm spots and uneven cooling. What it does:

• Drives internal airflow to distribute cold air between compartments for more uniform temperatures.
• Restores circulation when a failed motor causes weak or no airflow.
• Common, safe-to-report symptoms: uneven cooling, warm spots in the fridge, the appliance running more than usual, or unusual humming/noise from the cabinet.
• Works with the appliance's wiring harness and mounting system to deliver continuous air movement while the cooling system runs.

• Always unplug the appliance before beginning service to avoid electric shock.
• Handle the motor and fan blades carefully to avoid bending or damage; keep fingers and tools clear of blades.
• Confirm correct connector orientation and secure mounting to prevent vibration or rubbing.
• After installing, power up briefly to verify the motor runs and the fan spins freely before reassembling panels.

This AC fan motor is the refrigerator fan motor that circulates air to maintain proper cooling and airflow. It replaces a worn or failed fan motor to help restore steady airflow and consistent temperatures. What it does:

• Spins the evaporator/condenser fan blade to move air through the refrigerator cooling system
• Restores airflow when fan has stopped running or runs intermittently
• Reduces unusual fan noise or vibration caused by a failing motor
• Helps correct uneven cooling or frost build-up linked to poor air circulation

• Disconnect power to the appliance before starting any work
• Handle the fan blades carefully to avoid bending or injury
• Verify fan blade seating and clearances during reassembly to prevent rubbing

This Is A Blower Motor !!!! For Turntable Motor Use W10642989!!!!

The Fan Motor is an OEM part compatible with Whirlpool microwave ovens. It is a crucial component responsible for circulating air and ventilating the interior of the microwave during operation. The fan motor ensures proper air flow, which helps regulate temperature and prevent overheating.

Symptoms of a bad Fan Motor include:

• Inadequate ventilation or poor air circulation within the microwave
• Overheating issues or unusual odors during use
• Excessive noise or rattling sounds coming from the fan area
• Complete failure of the fan to operate or turn on

Causes of a bad fan motor can range from bearing failure due to wear and tear over time, to physical damage from impact or debris buildup. Electrical issues, such as voltage fluctuations or component failures, can also contribute to the malfunction of the fan motor.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwave models. 

Stirrer motor

This convection fan motor assembly circulates air inside the microwave's convection oven cavity to promote even cooking and browning. It replaces a failed fan motor to restore proper airflow for convection cooking performance. What it does:

• Circulates heated air across the oven cavity for more even baking and roasting
• Aids in consistent temperature distribution during convection cycles
• Stops or reduces overheating by moving hot air away from internal components
• Common symptoms: no convection airflow, uneven cooking/browning, humming or grinding noise from fan area

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle sharp sheet-metal edges and the assembly carefully to avoid cuts
• Verify connector orientation and secure wiring; do not force connectors

This motor ventilation part is the replacement vent fan motor that moves air through the appliance for proper cooling and exhaust. Replacing a failed vent motor restores airflow and helps the appliance maintain safe operating temperatures. What it does

• Spins the ventilation fan to move air for cooling or exhaust
• Helps prevent overheating by promoting proper airflow
• Can stop symptoms such as reduced or no exhaust, weak airflow, or abnormal motor noise
• Works as the airflow drive component in the appliance's ventilation system

• Disconnect power to the appliance before starting any repair
• Basic mechanical skill and common tools are usually required; refer to the service manual for disassembly instructions

The Microwave Cooling Fan Motor is essential for maintaining optimal airflow in your microwave, ensuring it operates efficiently and stays cool during use. This genuine OEM part is specifically designed for Samsung microwave models, providing a perfect fit and seamless integration. Built with durability in mind, the cooling fan motor effectively dissipates heat, which helps extend the lifespan of your appliance by preventing overheating. Installing this motor is straightforward, allowing you to easily replace a faulty component and restore your microwaveGÇÖs performance without any hassle. By choosing the Microwave Cooling Fan Motor , you are investing in reliable quality that guarantees consistent cooling and quiet operation. Whether your microwave has been experiencing unusual noises or performance issues related to overheating, this genuine OEM part offers a dependable solution. Enhance the functionality of your Samsung microwave and enjoy a smoothly running kitchen appliance with this high-quality cooling fan motor.

The Turntable Motor is an OEM part for GE microwaves. It is responsible for rotating the glass turntable plate during cooking, ensuring food is evenly heated throughout the microwave cavity. 

Symptoms of a bad turntable motor include:

• The turntable not spinning at all or rotating unevenly
• Loud grinding or clicking noises coming from the motor area  
• The turntable plate wobbles excessively during the operation

Causes can be normal wear and tear over time from continuous use, failure of electronic components in the motor, or damage from heavy loads or impact. This GE replacement motor restores even cooking performance.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today before a minor problem becomes a major repair bill. Continued use without a properly functioning turntable can damage other microwave components.
 

This cooling fan motor spins the internal fan that moves air through the appliance to dissipate heat and protect sensitive components. Replacing a noisy, weak, or seized motor restores proper airflow and dependable operation.

• Drives the cooling fan to circulate cooling air within the cabinet
• Helps prevent overheating and thermal shutdowns of internal parts
• Restores airflow when the original motor is worn, noisy, or not turning
• Typical signs include no fan movement, unusual humming/squealing, reduced airflow, or the unit shutting off from heat

• Disconnect power (and gas, if applicable) before servicing; allow the appliance to cool completely
• Access the motor by removing the appropriate rear/top or control-panel cover for your model
• Note wire orientation; transfer the fan blade and any mounting parts from the original motor if required
• After installation, ensure the fan spins freely and verify proper airflow and quiet operation