Mtd Parts

This cotter pin is an authentic OEM replacement part sourced directly from the manufacturer for use on many different lawn and garden machines in many different applications. Cotter pins are pins that are made of metal that are bent with or without curves on one side. The u-shaped pin is used to secure bolts in place. After installation, the ends of the pin are twisted to hold it tightly in place. One example of cotter pin use is on lawnmower wheels. After the wheel is placed on the shaft, the cotter pin slides through the hole on the end of the shaft to keep the wheel in place.Over time, cotter pins may become rusted, or the part being held together may need to be replaced. When the cotter pin is removed, a new one should be installed to ensure a tight hold. Use pliers to untwist or straighten the cotter pin for removal. Pull the cotter pin back through the hole using the pliers. To install a new cotter pin, push the pin through the hole and spread the ends in opposite directions once the pin is through the hole.This cotter pin is made of heavy-duty metal and is sold individually. It is designed for use in many different lawn and garden machines manufactured by various companies, including Craftsman, MTD, and Makita.

This replacement part is a pin. This is a genuine replacement part made by MTD. Pins are typically small but important parts of many machines and appliances. They are responsible for holding different parts together to allow for the machine to operate smoothly. A new pin might be needed if the current one is missing or damaged. Pins can easily become lodged into place due to normal wear and tear. This repair should be fairly simple and require only common household tools such as a screwdriver and possibly pliers. Refer to the proper user manual before attempting to replace this part. This part is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

Dowel pin fastener for gas snowblowers. Secures components in place during operation. Replace if missing, bent, or sheared to restore proper assembly.

Spring roll pin fastener for snow thrower assemblies. Secures moving parts and linkages. Replace if pin is missing, worn, or falls out during operation.

Dowel pin for walk-behind lawn mowers. Fastening component used in internal machinery. Replace if worn, damaged, or missing. Sold individually.

Snap ring fastener for lawn mowers and outdoor power equipment. Secures components on shafts and axles. Replace if worn, broken, or missing.

Fix mower that won't move or has grinding noises with this 14-tooth left-hand spur gear. Essential transmission component for self-propelled models.

Fixes auger drive issues and grinding noises in snow blowers. This thrust collar supports proper auger rotation and prevents metal-on-metal wear.

Bearing cup works with cone to provide stability and support radial/axial loads in your lawn tractor. Replace if worn or damaged. Verify fit with model number.

This three arm knob is an authentic OEM replacement part sourced directly from the manufacturer for use on lawn and garden machines as an adjustment handle, often for seat adjustment. The three sides of the knob make it easy to grasp and turn. The long threaded shaft ensures the knob is securely attached to the part it is used to adjust and has ample room for turning and adjusting. Over time, the plastic arms of the knob may deteriorate and crack making it difficult to turn. Cracks in the plastic can cause cuts and scratches. If the plastic breaks completely off, the handle will not be useable and should be replaced. If the plastic is broken, a pair of vise grips will be needed to remove the shaft of the handle. Once the handle is removed, line the threaded end of the handle up with the hole and turn it to tighten it in place. Don't over tighten as it could cause the threads to strip and not be usable.This three arm knob is a black plastic and metal part that is sold individually. It is designed for use in lawn and garden equipment that is manufactured by Husky, Craftsman, and Yard Machines.

Rubber handle grip for lawn mowers, tillers, and snow blowers. Replaces worn, cracked, or missing grips on push equipment handles for better control.

This knob is an OEM replacement part for MTD power equipment. The seat knob is responsible for adjusting the height of the seat to ensure a comfortable and safe position for the operator while using the lawn tractor. It is usually located on the side or the front of the seat and is connected to a shaft or linkage that controls the seat height adjustment.

Causes of a bad knob can include regular wear and tear from frequent use, exposure to harsh weather conditions, or accidental damage. These factors can lead to the knob becoming loose, cracked, or broken, making it difficult to operate the equipment effectively.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting the knob
• The knob slipping or not staying in place
• Visible cracks or breakage
• The knob falling off during use

This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring broad applicability for your outdoor equipment needs.

Red plastic wing knob that secures the lever handle to the mower base. Replace if cracked, broken, or missing to properly hold components together.

Height adjustment knob for walk-behind lawn mowers. Replaces broken, cracked, or missing knobs that control cutting deck height settings.

This adjustment lever knob is a genuine MTD part, sold individually. This adjustment lever knob can be used as a replacement part for a lawnmower. This adjustment lever knob is to adjust the operating height of the lawnmower wheel and the deck.The adjustment lever knob should be replaced if it can no longer customize the height of the lawnmower wheel and the deck or if the height of these components cannot be maintained during the standard operation of the appliance. If the knob suffers damage rendering it beyond functionality or if general wear and tear from long-term usage has left the knob non-reactive to operation, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This Adjustment lever knob is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Murray, Yard Machines, Huskee, Yard Man, and MasterCut.

Wing knob for gas walk-behind mowers. Secures components with 1/4-20 thread. Replace if cracked, stripped, or missing for proper assembly and adjustment.