Kenmore Washer 110.20172000 (11020172000, 110 20172000) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10001130
The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and mini
Do-It-Yourself Stories from Customers like You
It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle Carl W. • Glendale , AZ • June 27, 2015
REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS...
Read more
More
$6.95
- Compare At:
-
$8.34
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP354987
The Idler Shaft Retaining Ring is an OEM replacement part for Whirlpool dryers. Also called an "E" ring, it is a sealing gasket positioned between the front and rear housing omponents. Maintaining an airtight seal prevents gas leakage and pro
Do-It-Yourself Stories from Customers like You
Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018
First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!!
Read more
More
$12.56
- Compare At:
-
$14.95
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the i
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$7.31
- Compare At:
-
$8.77
- You Save:
-
$1.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63292
The Spin Tube Thrust Washer is an OEM component for Whirlpool washing machines. It is a washer that fits around the agitator shaft and helps create a seal between the agitator shaft and the aluminum tub. This washer allows the agitator to spin freely d
Do-It-Yourself Stories from Customers like You
No spin every thing else worked made high speed ticking noise Anthony D. • Follansbee , WV • May 12, 2015
First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in...
Read more
More
$9.95
- Compare At:
-
$12.08
- You Save:
-
$2.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10145155
Secures suspension springs to the washer tub assembly. Replace if cracked, worn, or missing to prevent tub instability during wash and spin cycles.
Do-It-Yourself Stories from Customers like You
Tub out of alignment violent wobbling during spin cycle Stephani W. • Folsom , CA • January 29, 2018
When I removed the cabinet, all of the springs appeared in tact, I had already replaced the counter balance spring so I knew that was not the issue. None of the suspension springs or brackets were broken but they did look worn/rusty so I replaced all of the brackets (2 in front and 1 large in back), all of the suspension spring retainers, and all of the suspension springs and it fixed the issue! I plan to also replace the Self leveling leg spring which is an easy fix since it's on the back of...
Read more
More
$6.95
- Compare At:
-
$8.27
- You Save:
-
$1.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546127
The Retainer Clip is an OEM replacement part for Whirlpool direct drive washing machines.
Causes of a bad retainer clip can include wear and fatigue from continuous vibration over many wash cycles. Cracks or breaks in the plastic material
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$9.41
- Compare At:
-
$11.10
- You Save:
-
$1.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water syst
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.41
- Compare At:
-
$11.10
- You Save:
-
$1.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684
Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.
This part fixes the following symptoms
-
Will not agitate
-
Will not drain
-
Won't start
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The spin cycle would not initiate pump to drain tub Douglas B. • Skull Valley , AZ • January 21, 2017
Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new.
Read more
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W11095997
Seals the washer shaft to prevent water leaks from the tub during wash cycles. Replace if you notice water pooling under your machine. Verify fit.
Do-It-Yourself Stories from Customers like You
Agitator would not work David W. • Murfreesboro , TN • November 19, 2014
Used the parts and youtube video from your company.
Read more
More
$22.95
- Compare At:
-
$27.08
- You Save:
-
$4.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 285244
The Rear Leveling Leg is an OEM part for Whirlpool washing machines. It provides support and adjustment capability to compensate for uneven surfaces or flooring. By adjusting the height of the rear leveling leg, you can achieve a balanced and stable po
Do-It-Yourself Stories from Customers like You
Washing machine shook terribly Edward L. • Temecula , CA • August 09, 2015
Replace front legs and rear legs took about 30 minutes. Made sure rear legs had lithium grease applied ran a load of wash very little Vibration nothing compared to before legs were installed and balanced the machine with a level.
Read more
More
$22.41
- Compare At:
-
$26.67
- You Save:
-
$4.26
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10080230
Washer won't spin or leaves clothes wet? This clutch retaining clip secures the clutch assembly for proper transmission engagement. DIY repair.
Do-It-Yourself Stories from Customers like You
Washer would not agitate Robert C. • Newark , DE • September 25, 2014
Took washer apart to find a bad Neutral Drain Transmission. Ordered part from here and fixed with no problems.
Read more
More
$7.78
- Compare At:
-
$9.26
- You Save:
-
$1.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP356138
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose the
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63134
The Sound Dampening Ring is an OEM replacement part for Whirlpool washing machines. Located within the clutch housing, it serves to minimize noise transmission from internal components.
Causes relate to years of absorbing internal impacts
Do-It-Yourself Stories from Customers like You
Our washer quit spinning Howard H. • Walton , KS • November 16, 2015
I did some research to diagnose the problem.After watching the videos I determined it needed
a clutch kit. I didn't know the first thing about washing machines,but I ordered the parts and with
the provided video,it was a piece of cake. Our washer works great now!
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts o
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 350572
Lubricates transmission gears for smooth wash and spin cycles. Replace when degraded or after transmission repairs. Verify compatibility with your model.
Do-It-Yourself Stories from Customers like You
Teeth stripped from gear in transmission Robert G. • Wentzville , MO • June 17, 2015
The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as...
Read more
More
$52.95
- Compare At:
-
$62.48
- You Save:
-
$9.53