Kenmore Washer 110.81351100 (11081351100, 110 81351100) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546462
Supports the spin basket and reduces friction during operation. Replace if you hear grinding, thumping, or squealing noises during spin cycle. Confirm fit.
Do-It-Yourself Stories from Customers like You
Leak (found to be tub seal) and extreme spin vibration. Paul H. • Lakewood , CA • June 26, 2021
First, DO NOT call Sears for parts, their call center knows nothing about the product. App-Pros are the best for help and the right parts. I figured to repair, replace all seals and any item that shows need to and all items that have to do with the spin that may be bad. Repair videos great help. I will start from the "bottom" up, the repairs were not done in this order, just a list of what I did and notes. Replaced-- motor drive coupling, (checked out transmission ok), thrust washer,...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546127
The Retainer Clip is an OEM replacement part for Whirlpool direct drive washing machines.
Causes of a bad retainer clip can include wear and fatigue from continuous vibration over many wash cycles. Cracks or breaks in the plastic material may develop as well.
Symptoms of a bad Retainer Clip include:
- Water leaks detected around the pump area inside machine cabinet
- Loosening of hoses or tubes interrupting proper drainage flow
- Potential pump component detachment from disconnected lines
- Damage to neighboring components submerged by leaked water
The OEM Whirlpool part is also compatible with Maytag, Jenn-Air, and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: W11095997
Seals the washer shaft to prevent water leaks from the tub during wash cycles. Replace if you notice water pooling under your machine. Verify fit.
Do-It-Yourself Stories from Customers like You
Agitator would not work David W. • Murfreesboro , TN • November 19, 2014
Used the parts and youtube video from your company.
Read more
More
$23.61
- Compare At:
-
$28.10
- You Save:
-
$4.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Water leaks around the hose connection points
- The hose slipping off the fitting
- Visible rust or wear on the clamp
- Difficulty in tightening the clamp to secure the hose
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: 285244
The Rear Leveling Leg is an OEM part for Whirlpool washing machines. It provides support and adjustment capability to compensate for uneven surfaces or flooring. By adjusting the height of the rear leveling leg, you can achieve a balanced and stable position for your appliance.
Causes of a faulty or damaged rear leveling leg can include regular use, accidental impact, or wear and tear. A damaged leveling leg can lead to an unstable appliance, increased vibrations, or difficulty in maintaining a level position.
Symptoms of a bad rear leveling leg may include:
- Appliance wobbling or rocking during operation
- Uneven distribution of weight
- Difficulty in aligning the appliance with adjacent units or countertops
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Washing machine shook terribly Edward L. • Temecula , CA • August 09, 2015
Replace front legs and rear legs took about 30 minutes. Made sure rear legs had lithium grease applied ran a load of wash very little Vibration nothing compared to before legs were installed and balanced the machine with a level.
Read more
More
$22.41
- Compare At:
-
$26.67
- You Save:
-
$4.26
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10080230
Washer won't spin or leaves clothes wet? This clutch retaining clip secures the clutch assembly for proper transmission engagement. DIY repair.
Do-It-Yourself Stories from Customers like You
Washer would not agitate Robert C. • Newark , DE • September 25, 2014
Took washer apart to find a bad Neutral Drain Transmission. Ordered part from here and fixed with no problems.
Read more
More
$12.95
- Compare At:
-
$15.41
- You Save:
-
$2.46
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63134
The Sound Dampening Ring is an OEM replacement part for Whirlpool washing machines. Located within the clutch housing, it serves to minimize noise transmission from internal components.
Causes relate to years of absorbing internal impacts fatiguing the damping material. Buildup of grime and detergent residue in its ridges may diminish noise-isolating effectiveness over time.
Symptoms of failure include:
- Excessive humming or clanking sounds from the transmission area
- Increased cabinet vibrations felt externally during operation
- Improper sound insulation leads to a louder overall noise profile
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our washer quit spinning Howard H. • Walton , KS • November 16, 2015
I did some research to diagnose the problem.After watching the videos I determined it needed
a clutch kit. I didn't know the first thing about washing machines,but I ordered the parts and with
the provided video,it was a piece of cake. Our washer works great now!
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP356138
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
- Water leaks around hose connections
- Loose or disconnected hoses
- Unusual noises or vibrations during operation
- Water pressure issues within the washing machine
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$9.63
- Compare At:
-
$11.46
- You Save:
-
$1.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP353244
Washer overfilling or not filling properly? A damaged pressure switch hose prevents accurate water level sensing. Easy 15-minute DIY fix with video.
Do-It-Yourself Stories from Customers like You
My kenmore washer model 11029828801 was agitating during the fill cycle and the tub would only partially fill also at the end of the spin cycle rinse water was spraying in resoaking the clothes Jay S. • Hammond , IN • February 07, 2017
I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new...
Read more
More
$53.21
- Compare At:
-
$63.32
- You Save:
-
$10.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119828
The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.
Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.
Symptoms of a bad washer lid screw include:
- The washer lid feeling loose or wobbling
- Difficulty in opening or closing the lid
- Visible rust or corrosion on the screw
- The lid not staying securely in place
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Whirlpool cabrio washer cracked lid (model wtw7800xw2) Mike M. • West Hartford , CT • November 29, 2016
I just replaced the glass lid and broken plastic frame with the all metal one.
Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016):
1 lid part number WP8572026 (AP6013408) for $119.81
2 hinges WP8563964 (AP6004844) for $6.17 each
4 screws WPW10119828 (AP6015313) for $1.97 each
Total $140.03 plus $8.95 shipping, grand total $148.98
Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The...
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: 350572
Lubricates transmission gears for smooth wash and spin cycles. Replace when degraded or after transmission repairs. Verify compatibility with your model.
Do-It-Yourself Stories from Customers like You
Teeth stripped from gear in transmission Robert G. • Wentzville , MO • June 17, 2015
The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as...
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62780
Used to lock washer cabinet to rear wall of washer.
Do-It-Yourself Stories from Customers like You
Slightly imbalanced load in the washer created a a lot of noise. Marvin F. • Williamsburg , VA • March 13, 2014
Replaced springs and the ordered clips holding the control panel to the washer outer cabinet. Clips had been elongated from earlier repair work. A DIY tutorial was a great help.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9724509
These lid bumpers are sold individually.
Do-It-Yourself Stories from Customers like You
Water pump after 18 years wore thru the pvc housing causing a pin hole leak James B. • Palomar Mountain , CA • April 13, 2014
Found AppliancePartsPros on-line. Sent us the manual, parts list, etc. via .pdf files. Our local guy did not. Had parts in stock, two day shipping, totally painless. The parts were approximately 1/2 the price the local guy wanted. OEM parts. Perfect fit on replacement. The Whirlpool is so well made, it was very easy to repair. It has several items, over the years, which failed. In all cases, repair was painless with a few common hand tools and a tad of patience. AppliancePartsPros had...
Read more
More
$7.48
- Compare At:
-
$8.90
- You Save:
-
$1.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21258
The lid hinge bearing is used for the lid hinges on washers and dryers. When functioning properly, it allows the lid to open and close properly. If this is a problem with the bearing, it could make the lid difficult to move. In some cases, when the lid will not close, it means that the machine will not function correctly. Damaged lid hinge bearings should be replaced as soon as possible.The lid hinge bearings see a lot of work since they are in use whenever the lid of the washer or dryer opens and closes. They could become cracked and broken over time. Replacing the bearings is a relatively simple repair that owners can make on their own.This lid hinge bearing is for use with many models of washers and dryers from Whirlpool, KitchenAid, Roper, Estate, Inglis, Maytag, Admiral, Amana, Crosley, and Magic Chef. This is a genuine OEM replacement part that has been sourced from the manufacturer. The piece is sold individually, so if owners need to replace more than one hinge, they will need to buy multiples.
Do-It-Yourself Stories from Customers like You
Whirlpool washer David L. • Linn , MO • August 31, 2015
With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved.
Read more
More
$11.95
- Compare At:
-
$13.33
- You Save:
-
$1.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946532
Washer motor shield deflects water, lint, and debris away from the drive motor. Replace if cracked or missing to prevent motor damage. Simple install.
More
$20.49
- Compare At:
-
$24.18
- You Save:
-
$3.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8519200
Structural bracket that secures the rear panel to the washer chassis. Replace if cracked, broken, or missing to restore proper alignment and cabinet stability.
Do-It-Yourself Stories from Customers like You
No spin/agitate. Daniel S. • Landenberg , PA • November 11, 2022
In the end, with a new coupler. But I relearned old lessons the hard way.
The washer is in a rental unit and the tenant complained of no spin. My first intuition was that the coupler failed again because I bought a cheaper one elsewhere a couple of years ago and not the brand name available here at AppliancePartsPros. But we’ll come back to that. Lesson #1: Verify the symptoms firsthand. I dug in right away, popped out the motor and the coupler appeared okay. When I spun it by hand, it turned...
Read more
More
$18.23
- Compare At:
-
$21.69
- You Save:
-
$3.46