Range / Cooktop / Oven Handle

Color: White

This black oven door handle restores a secure grip and clean look to your appliance. Replace a cracked, loose, or missing handle to safely open and close the oven door.

• Provides the handhold used to open and close the oven door
• Replaces damaged or missing handle to restore normal operation
• Helps address a loose, wobbly, or sagging handle
• Refreshes the door's appearance when the old handle is scuffed or broken

• Disconnect power at the breaker; for gas units, shut off gas. Allow the oven to cool completely.
• Remove the door or inner panel per your model's manual to access the handle mounting screws.
• Support the outer glass/trim while removing and installing hardware to prevent damage.
• Tighten mounting screws evenly and verify smooth door operation before use.

This replacement handle restores a secure, comfortable grip for opening and closing your appliance door. It replaces a cracked, loose, or missing handle so operation feels normal again and the appliance maintains a clean, finished look.

• Provides a sturdy handhold to pull/push the door during everyday use
• Attaches to existing mounting points on the door
• Common symptoms: cracked or broken handle, looseness, missing handle, difficulty opening the door
• Helps return the appliance's appearance to like-new condition

• Disconnect power to the appliance before starting; allow hot surfaces to cool
• Wear cut-resistant gloves; support the door/handle while removing hardware
• Reuse existing screws/end caps as applicable; start all fasteners before tightening
• Tighten evenly without overtightening; verify smooth door operation after installation

Color: Black

Color: Black. For white order WP74011768. For bisque order WP74011778. For screws order WP74006515.

Color: Bisque. For white order WP74011768. For black order WP74011767. For screws order WP74006515.

The Spacer is an OEM part for Frigidaire ranges and ovens. This part provides the necessary clearance between the oven door handle and the door itself, preventing friction and wear while ensuring the handle is securely attached and easy to use. This small but crucial component aids in the proper functioning of the oven door, making it easier and safer to open and close without exerting extra force.

Causes of a bad Spacer include mechanical stress leading to cracks or breaks, improper installation that may result in loosening over time, and degradation from heat exposure and frequent use.

Symptoms of a failing Spacer include:

• Loose oven door handle.
• Difficulty in opening or closing the oven door.
• Visible gaps or misalignment of the door handle.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is the factory handle set for select Frigidaire-built appliances. It restores a secure, comfortable grip and fresh appearance so doors or drawers open and close as intended. What it does

• Provides the handhold needed to open and close the appliance door or drawer
• Replaces cracked, broken, or missing handles
• Helps correct loose or wobbly handles that won't stay tight
• Refreshes worn or scuffed handles for a cleaner look

• Manufacturer-supplied handle set

• Disconnect power before servicing; allow hot surfaces to cool
• Remove interior/hidden mounting screws and the old handle
• Align and secure the new handle; re-use existing hardware/brackets if applicable
• Do not overtighten fasteners; verify smooth door/drawer operation

Color: White

Color: White. For biscuit use 98017790T. For black use WP98017790B.

Color: Black

Color: Black

The Handle Kit is an OEM part for Frigidaire electric ranges. It contains a replacement handle and hardware to securely fasten it to the oven door. As a high-touch surface, oven handles can become worn, damaged, or loose with regular cooking use over time. 

Causes of a faulty handle include signs of wear like scratched finishes, loose fastening, or broken/cracked plastic. Other factors are repeated heating cycles from oven use or occasional impacts.

Symptoms of a bad handle include:

• Loose, dangling, or detached handles   
• Rough or sharp edges presenting a safety hazard
• Handles too hot to grasp comfortably during/after cooking  
• Broken fasteners compromising secure attachment

Color: Black

This complete OEM Frigidaire handle kit restores a like-new grip and appearance. Precision-machined handles ensure a seamless fit for years of safe, reliable use. This kit is also compatible with some Electrolux, Westinghouse, and Kenmore models. 
 

This black oven door handle replaces a cracked, loose, or missing handle and restores a secure, comfortable grip on your range. It matches the original finish and helps keep the door easy to open and close.

• Provides a sturdy handhold for opening and closing the oven door
• Replaces a handle that is cracked, broken, loose, or missing
• Helps eliminate wobble and improves door control
• Refreshes the appliance's appearance with a matching black finish

• Disconnect power and allow the oven to cool completely before servicing.
• Support the door and glass while removing inner trim screws to access the handle fasteners.
• Transfer existing end caps/mounting hardware from the old handle; align the new handle and tighten screws snugly—do not overtighten.
• Reassemble and check that the handle is secure before use.

Color: White. For bisque order 316270202. This oven door handle no longer comes with an insert for the screw. Which means you will need to order the replacement screws part number 5304500008 to grip into the plastic of the new handle.

This replacement door handle restores a secure, comfortable grip on your appliance door. A worn or broken handle can make opening the door difficult and unsafe; swapping it returns normal operation and appearance.

• Provides the leverage needed to open and close the door smoothly
• Helps resolve issues like loose, cracked, or missing handle
• Improves safety by giving a stable handhold
• Restores original fit and finish when the old handle is worn or damaged

• Unplug power and let the appliance cool completely before starting
• Support the door and remove mounting screws from the interior side as applicable
• Transfer any end caps or trim pieces from the old handle if required
• Do not overtighten screws to avoid cracking the handle or door panel

This is an end cap handle intended for use on ovens. This part attaches the rest of the door handle to the range. If the end cap handles are cracked or misplaced, a replacement part is required.A visual inspection will determine the condition of the end cap handle. Replacing the end cap handle is a simple process. Make sure to allow the device to cool completely before starting the repair. Assess the condition of both end cap handles before placing an order. Remove the old end cap if there is one in place and attach the new replacement part.This end cap handle is a genuine OEM replacement part. It is sourced directly from the manufacturer. The end cap handle is sold as an individual unit. The replacement part fits on several different models of ranges. It is compatible with devices produced by General Electric, RCA, and Hotpoint brands.