Range / Cooktop / Oven Touch Pad

This control panel assembly provides the user interface and housing for the oven/microwave control electronics, restoring button and display operation for timed, cooking and setting functions. What it does:

• Houses the user buttons/touchpad and display so you can select cook time, settings and start/stop functions
• Replaces a cracked, faded or unresponsive panel that prevents reliable input or clear readout
• Routes user inputs to the oven control board so commands are registered correctly
• Helps stop intermittent or non-working buttons when the panel or keypad has failed

• 1 control panel assembly

• Disconnect power at the breaker before attempting any service to avoid shock
• Handle the display and ribbon/connectors carefully; do not force connectors when removing or installing
• Installation may require removing the oven door or trim panels—keep screws and fasteners organized

Black. No longer includes control board. For control board use 74008952

This control panel is the front console fascia that houses your appliance's user interface and display, restoring a clean, functional control surface for selecting cycles and viewing settings. What it does:

• Provides the user interface and display area used to select cycles, options, and monitor status.
• Protects the underlying electronics and touchpad assembly from spills and impact.
• Replaces cracked, faded, or physically damaged control surfaces that make buttons hard to read or press.
• Can resolve symptoms like unresponsive or sticking buttons, missing labels, or visible panel damage.

• One control panel (console) as shown.

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the panel carefully to avoid scratching the finish or damaging attached clips and connectors.
• Some installations require transfer of the keypad/display or disconnecting ribbon cables; note which pieces come attached and which must be moved from the old panel.

The Control Panel is an OEM part for Whirlpool ranges. It features durable metal buttons and an informative LED display used to operate cooktop burners, oven features, and specialized cooking modes. The responsive control panel provides simple selection and monitoring of range functions.  

Causes of control panel damage can include liquid intrusion over time deteriorating internal electronics, cracks developing from accidental impacts near knobs or indicator lights.

Symptoms of a faulty control panel are:

• Intermittent or unresponsive buttons and dials
• Glitchy or readings on the digital display  
• Repeated issues starting desired oven or cooktop programs

This OEM replacement is also compatible with some KitchenAid, Jenn-Air and Kenmore stove models.

This faceplate graphics assembly replaces the printed overlay on a range or oven control panel to restore clear button labels and a finished appearance. It helps make controls readable and improves cosmetic condition. What it does:

• Replaces worn, faded, scratched, or peeling control panel graphics so buttons and indicators are legible
• Restores the original labeled layout for accurate selection of functions and settings
• Protects the underlying control panel from spills and light abrasion
• Improves the appliance's appearance after long-term use or cleaning-related wear

• Disconnect power to the appliance before beginning any repair to avoid shock or injury
• Typically mounts to the control panel with clips or screws; handle gently to avoid cracking the plate
• Align graphics carefully with buttons and switches to ensure proper function and fit
• Use only mild cleaners on the new graphics; avoid abrasive pads or harsh chemicals that can damage the finish

This control panel assembly houses the user interface and display for the oven/range console, restoring readable displays and responsive buttons. Use it to replace a cracked, unresponsive, or malfunctioning front control console and regain normal oven control. What it does:

• Provides the button/touch interface and display for oven/range controls
• Replaces damaged or cracked console surfaces that block or misregister inputs
• Restores operation when buttons are sticky, unresponsive, or display is blank/intermittent
• Works as the main user interface for setting temperature, timers, and modes

• Disconnect power to the appliance at the breaker or unplug before starting.
• Handle the assembly carefully to avoid damaging the display, glass, or internal PCB and connectors.
• Use basic hand tools to remove the outer trim and mounting screws; support the panel while disconnecting wiring.

The Panel Overlay Assembly is an OEM component specifically designed for GE slide-in electric ranges. It serves as the full decorative protective covering for the range control area. 

Symptoms of a bad panel overlay assembly include:

• Peeling, flaking, or scratched surface graphic appearances  
• Loose or lifted edges exposing underlying surfaces
• Difficulty reading control markings that have faded
• Non-functional control buttons or interfaces under the panel

Prolonged exposure to cooking greases, steam, and cleaning chemicals can degrade plastics and finishes over time. This genuine GE replacement fully encapsulates the front for a refreshed look and feel. Reinforced materials in the overlay assembly stand up to continued daily use in the kitchen. Compatible GE slide-in ranges include Monogram and select KitchenAid built-in models.
 

This is the panel control tape ribbon assembly used to connect the console touchpad to the oven control electronics, restoring reliable button and display communication for the appliance control panel. What it does:

• Transfers signals between the touchpad/console and the main control board so button presses register.
• Replaces damaged, cracked or worn ribbon contacts that cause intermittent or non-responsive controls.
• Helps resolve issues like unresponsive keys, error codes tied to keypad faults, or sporadic display behavior.
• Flexible ribbon design lets it fit behind the control panel without bulky wiring.

• One panel control tape ribbon assembly as shown.

• Disconnect power to the appliance (unplug or shut off breaker) before starting.
• Handle ribbon contacts carefully—avoid sharp bends, creases, or touching conductive traces.
• Installation typically requires removing the front control panel or console; keep screws and clips organized.

This control panel overlay is the printed decal that covers the appliance console, restoring button labels and the finish around the controls for a clean, readable interface. It helps make controls easy to read and gives the console a refreshed appearance. What it does:

• Replaces worn, faded, or damaged button labels and graphics on the console
• Restores a clear, legible control surface so settings and symbols are visible
• Protects the underlying control board area from light wear and cosmetic damage
• Commonly used when characters or icons have rubbed off or the panel looks worn

• One control panel overlay decal

• Intended for cosmetic replacement; remove power or unplug appliance before starting
• Peel-and-stick or install using factory mounting points—align carefully to avoid wrinkles
• Clean and dry the console surface before applying for best adhesion

Color: Black

This backguard kit replaces the upper rear panel and trim on compatible ranges to restore a clean appearance and protect wall and controls from spills and heat. It's a direct-fit exterior repair for damaged, bent, or corroded backguards. What it does:

• Replaces the upper rear backguard panel and trim to restore the range's finished rear appearance
• Protects the control area and wall from splashes, grease, and heat exposure
• Helps stop drafts and gaps behind the range that can collect debris
• Addresses visible damage like dents, rust, or cracked trim

• Disconnect power to the range (unplug or switch off breaker) before starting work.
• Installation may require lifting and aligning the panel; use a second person for safety on larger ranges.
• Use common hand tools; keep fasteners and mounting brackets from the old assembly if reusable.
• Follow the appliance manufacturer's service instructions for model-specific steps and torque values.

This backguard kit replaces the rear trim panel on compatible electric and gas ranges to restore appearance and protect the wall and control area from spills and splatters. Ideal for worn, bent, or damaged rear trim. What it does

• Covers the area behind the cooktop to block grease, steam and food splatter.
• Restores a finished appearance to the back of the range after damage or removal.
• Helps protect controls and wiring routed near the rear from direct splatter.
• Designed to attach to the rear of the range using existing mounting points.

• One backguard kit.

• Installation generally requires lifting or pulling the range forward; use a second person to avoid injury.
• Disconnect power before beginning work.
• Use caution around sharp sheet-metal edges and wear gloves.
• Follow the OEM parts diagram and hardware locations; replace any damaged mounting hardware.