Range / Cooktop / Oven Touch Pad

This bisque clock overlay restores the finished look of the range control panel and provides a clean face for the clock and control indicators. It replaces a cracked, faded, or missing overlay to improve appearance and readability. What it does:

• Covers and protects the clock/display area on the control panel
• Restores printed markings and a uniform finish for easier time reading
• Helps prevent dirt and debris from collecting on the clock face
• Useful when the existing overlay is cracked, discolored, or peeling

• One bisque clock overlay

• Disconnect power to the appliance before beginning any work
• Removal may require accessing or removing the control panel; follow model-specific service instructions
• Handle carefully to avoid scratching or bending the overlay during installation
• Use only manufacturer-recommended fasteners or adhesive as applicable for your model

This replacement overlay is the decorative and functional cover for the appliance control panel, restoring button labels and the finished appearance so controls are readable and protected from spills. What it does:

• Replaces worn or faded control-panel graphics so button labels and icons are visible
• Protects the underlying membrane switches and electronics from spills and surface wear
• Helps restore a clean, factory appearance to the console
• Resolves issues where worn legends cause confusion about button function

• One control-panel overlay as shown

• Designed to fit over the console; remove power before beginning work
• Handle carefully to avoid bending or creasing the overlay during installation
• Use common hand tools; follow OEM disassembly order to access the console
• If adhesive is present, clean the surface of old residue before applying the new overlay

Control panel provides the appliance's main user interface, housing the touchpads and display so you can choose cycles and options. Replaces a cracked, faded, or unresponsive control surface to restore normal operation. What it does:

• Houses the touch controls and display and relays user commands to the oven/range control electronics.
• Commonly replaces panels with unresponsive or intermittent touchpads.
• Addresses symptoms such as a blank, flickering or unreadable display and visible panel damage.
• Restores a clean, readable interface for selecting functions and settings.

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the display and overlay carefully to avoid scratching or damaging touch surfaces.
• Basic hand tools typically required; keep fasteners and mounting hardware for reassembly.
• The appliance still shows control errors after replacement, the main control board or wiring may need inspection.

Color: Black

Faceplate restores your appliance's control area by covering and protecting the electronic control board and buttons. It replaces cracked, dented or faded panel trim to improve appearance and help keep spills and debris away from controls. What it does:

• Covers and protects the control board and button assemblies from spills, grease and dust
• Restores the appliance's cosmetic appearance when the original faceplate is cracked, dented or faded
• Helps keep control buttons seated and prevents debris from interfering with switches
• Fits into the existing control housing using the original mounting locations

• Disconnect power to the appliance before beginning any repair
• Remove control knobs and the old faceplate to avoid damaging clips or wiring
• Handle edges carefully; replacement installs using the original screws/clips where applicable
• After installation, restore power and verify all controls operate normally; if controls do not respond, inspect the control assembly and wiring

Color: White

This control panel overlay replaces a worn or damaged console decal to restore button labels and the front appearance of the appliance. It lays over the control area to keep the underlying panel readable and protected. What it does:

• Replaces faded, scratched, or peeled control graphics so settings and icons are visible
• Protects the underlying control panel from wear, spills, and minor abrasions
• Restores a clean, factory look to the console for improved user interaction
• Helps resolve issues where worn markings cause confusion when selecting functions

• Disconnect power to the appliance before starting any work
• Remove the original overlay carefully to avoid damaging the underlying control surface
• Use appropriate adhesive or mounting method if required; follow OEM service instructions

This control panel overlay is the thin decorative and functional face that covers the appliance control area, restoring legible button labels and a clean finished look. It helps refresh worn or damaged controls without replacing the whole module. What it does:

• Replaces faded, scratched, or peeled control graphics so buttons and markings are readable again
• Protects the underlying control assembly from spills and light wear
• Restores the original appearance of the control area for improved usability
• Useful when labels are worn or the panel surface is cosmetically damaged

• Disconnect power to the appliance before beginning any work
• Typically aligns over the existing control surface and adheres or secures with the original fasteners — follow OEM instructions
• Handle carefully to avoid creasing; ensure surfaces are clean and dry before installing

This control console is the outer housing that holds and protects the appliance's control buttons and display, restoring a clean, functional front surface and securing the control components. What it does:

• Covers and supports the control board, buttons and display for normal operation
• Restores a finished appearance when the original console is cracked, broken or cosmetically damaged
• Helps keep moisture, dust and debris away from controls to reduce malfunctions
• Provides the mounting surface for knobs, switches and electronic controls

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle carefully to avoid scratching the finish and protect any attached wiring or trim
• Typical install requires removing the top or front trim and transferring controls or hardware as needed
• Keep all screws and clips; use the same hardware or OEM replacements for secure fit

This electronic oven timer/clock control replaces a failed timer module to restore timed cook functions and display time. It provides a direct replacement for the oven's timing and clock interface so bake/clean cycles and timed settings work reliably. What it does:

• Controls oven timing and clock display so delayed start, timed bake, and auto-shutoff functions operate correctly
• Replaces a non-working or unresponsive timer/clock assembly
• Can resolve symptoms such as no clock display, countdowns not running, or oven timers failing to start/stop cycles
• Interfaces with the oven control circuits to send start/stop timing signals

• Disconnect power to the appliance before beginning any repair to avoid electrical shock
• Installation typically requires removing the control panel and disconnecting the old timer's wiring harness and mounting hardware
• Handle the display and lens carefully to avoid scratching; confirm electrical connections are secure before reapplying power

This membrane switch touch pad replaces the flat electronic control surface on your appliance's control panel, restoring button responsiveness and user input. It provides the tactile contact surface the control board uses to register commands. What it does:

• Registers user button presses so the control board can start cycles and change settings
• Replaces worn, faded, or unresponsive touch buttons that fail to respond consistently
• Restores functions such as keypad entry, start/cancel, and other front-panel commands
• Helps address intermittent or nonworking controls caused by a damaged or worn pad

• Disconnect power to the appliance before starting any work to avoid shock or damage
• Handle the flexible ribbon connector and contacts carefully to avoid creasing or contamination
• Installation typically requires removing the control panel or console; keep screws and fasteners organized

A replacement glass and touch board assembly that restores the oven/range touch control surface and user interface. Replaces a cracked or unresponsive control glass and the integrated touch-sensing board to recover normal control operation. What it does:

• Replaces the front glass and integrated touch-control circuit for the range/oven control panel.
• Restores touch responsiveness when controls become unresponsive or intermittent.
• Replaces cracked, chipped, or scratched control glass that affects appearance or use.
• Can resolve control errors or display issues caused by damaged glass or touch circuitry.

• Disconnect power (unplug or turn off breaker) before starting any repair to avoid shock.
• Handle the glass carefully and wear gloves; glass can break and cut.
• Some models require removing the control panel or back cover to access and secure the assembly.

This control panel assembly provides the front-facing electronic interface and buttons that let you select cycles, options, and start or stop the appliance. It restores responsive controls and readable push-button or touch operation. What it does:

• Houses the appliance's main user controls and display so you can select cycles and settings
• Sends user commands to the main control board for operation
• Replaces worn, cracked, or non-responsive buttons or a faded display
• Helps resolve issues where buttons don't register or the panel shows no response

• One control panel assembly as shown

• Disconnect power before attempting service to avoid electrical shock
• Replacement generally requires removing the front console or trim; keep screws and connectors organized
• Handle the panel carefully to avoid damaging the display and ribbon/connectors

This replacement keypad is the membrane-style control interface that lets you enter cook settings and other commands on the appliance's front control panel. It restores tactile button input and clear button labels for reliable operation. What it does:

• Registers button presses and sends user commands to the range/microwave control board
• Replaces cracked, worn, faded, or unresponsive buttons and labels
• Helps resolve symptoms like buttons that don't respond, missing legends, or erratic input
• Fits behind the control panel and mates to the appliance's ribbon cable/connector

• Disconnect power to the appliance before starting any repair to avoid shock risk
• Handle the flexible membrane and ribbon cable carefully to avoid creases or damage
• Verify proper alignment and seating against the control panel before reassembly

This control panel assembly provides the user interface and housing for the oven/microwave control electronics, restoring button and display operation for timed, cooking and setting functions. What it does:

• Houses the user buttons/touchpad and display so you can select cook time, settings and start/stop functions
• Replaces a cracked, faded or unresponsive panel that prevents reliable input or clear readout
• Routes user inputs to the oven control board so commands are registered correctly
• Helps stop intermittent or non-working buttons when the panel or keypad has failed

• 1 control panel assembly

• Disconnect power at the breaker before attempting any service to avoid shock
• Handle the display and ribbon/connectors carefully; do not force connectors when removing or installing
• Installation may require removing the oven door or trim panels—keep screws and fasteners organized

Black. No longer includes control board. For control board use 74008952