Refrigerator Control Board

This is a refrigerator main control board. It manages and monitors the temperature settings of the appliance, including defrosting and cooling times. If the main control board is damaged or no longer working, the refrigerator or freezer could become too warm or cool, stop defrosting, or no longer start. In this situation, the part will need to be replaced.The only tool needed to replace the main control board is a flat blade screwdriver. First, make sure the refrigerator is unplugged to avoid it coming on during the replacement process. Next, two screws should be removed where the door closes before the light shield is taken off by pushing it to the back of the appliance. Find the access panel holding the main control board and apply pressure to pull it away. Free the pegs and move the hinges toward the front. Finally, install the connectors and take out the part before replacing it with a new component.This main control board is designed as an OEM replacement part sourced directly from the manufacturer. It is sold as a single component and fits several models of refrigerators from Ikea, Maytag, and Whirlpool.

The Inverter Box is an OEM component specifically designed for Whirlpool French door refrigerators. Located inside the refrigerator compartment top behind removable panels, the inverter box houses electronic components that control the compressor motor and refrigeration systems.

Causes of a bad inverter box include failure of internal circuit boards over several years of regulating refrigeration cycles or damage from liquid spills inside the unit.  

Symptoms of a bad inverter box include:

• Failure of the refrigerator section to adequately cool and maintain temperatures
• Erratic fluctuations in cold air dispensing from vents     
• Repeated triggering of defrosting modes unnecessarily 
• Inability to regulate between freezer and refrigerator settings

This Whirlpool replacement part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, and Kenmore side-by-side refrigerators.
 

This Whirlpool Fridge Control Box is an OEM part for a range of Whirlpool refrigerator models. It helps to manage the refrigerator's temperature and defrost settings. The control box is engineered to meet Whirlpool's precise standards, ensuring seamless integration and reliable performance in your refrigerator.

A malfunctioning control box may lead to irregular temperature regulation, resulting in either insufficient cooling or overcooling. These temperature inconsistencies can affect food quality and increase energy consumption.

Symptoms of a defective fridge control box include:

• Inconsistent or fluctuating refrigerator temperatures.
• The fridge fails to start the defrost cycle, leading to ice buildup.
• Unusual noises emanating from the fridge, indicating relay or electrical issues.
• The fridge runs continuously without cycling off.
• Digital displays or internal lights malfunctioning or not working.

This is a genuine Whirlpool OEM replacement part and is also compatible with Maytag, Jenn-Air, and some Kenmore models.
 

This main power control board (PCB assembly) is the appliance's electronic brain. It manages power and coordinates components so the unit starts, runs, and responds to commands correctly when the original board fails.

• Routes incoming power to internal components as needed
• Interprets inputs from the user interface and sensors to control operations and timing
• Oversees safety checks and protective shutdowns
• Typical failure symptoms: no power, won't start, unresponsive controls, intermittent shutdowns, or error codes

• Disconnect power to the appliance before servicing to prevent electrical shock
• Use ESD protection and handle the board by the edges only
• Label or photograph connectors and transfer wiring one at a time to the new board
• Some models require service-mode setup or calibration after installation; follow the service documentation

Color: Stainless

The Dispenser Control Board is an OEM part for Whirlpool refrigerators. It is responsible for controlling the various functions of the refrigerator dispenser, such as ice dispensing and water flow. It communicates with other electronic components to ensure accurate dispensing of ice and water, as well as controlling the display and lights associated with the dispenser.

A bad dispenser control board can occur due to electrical malfunctions, damage from power surges, or wear and tear over time. If you notice symptoms such as the dispenser not working, the display not lighting up, or erratic behavior from the dispenser, it may be time to replace this part.

Symptoms of a bad dispenser control board include:

• Dispenser not working
• Display not lighting up
• Erratic behavior from the dispenser

Restore your Whirlpool refrigerator's dispenser by replacing the faulty or damaged dispenser control board with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The UI Control Board is an OEM part for Whirlpool fridge displays. It processes inputs from touch buttons to manage temperature zones, lighting, and dispenser functions. 

Causes of failure relate to damage from prolonged exposure to ambient temperatures inside fridges. Regular thermal stresses can degrade sensitive electronic connections.

Symptoms of a bad UI control board include:

• Non-functional touchpad buttons   
• Inability to select temperatures or modes
• Faulty or blank control screen 
• LED lights or dispensers stopped working

This OEM replacement is compatible also with Maytag, KitchenAid, Jenn-Air and Kenmore fridges.

The Main Control Board is an OEM part for Samsung refrigerators. This central control board synchronizes and monitors all primary refrigerator functions and components, acting as the "brain" of the appliance. 

Causes of a bad main control board can include water damage, power surges, physical impact or dropping, and just natural failure over time due to heavy usage.

Symptoms of a bad main control board include:

• The refrigerator not cooling or functioning properly 
• Faulty temperature displays
• Intermittent or unreliable performance
• Compressor not engaging when needed
• Lights not turning on

Replacing the main control board with this genuine Samsung part will help restore optimized refrigeration and ensure prolonged, trouble-free operation. This board is compatible with LG and GE French door and bottom-freezer models as well.

This electronic control board is the main logic module that controls cycle selection and timing so your appliance responds correctly to user inputs and sensors. Replaces a failed control to restore normal control panel operation and cycle sequencing. What it does:

• Manages the appliance's user interface, timers and program logic
• Sends power and signals to motors, valves and sensors as needed
• Prevents or corrects erratic or unresponsive controls and cycle behavior
• Commonly linked to symptoms like no display, controls not responding, or cycles not advancing

• One electronic control board

• Disconnect power before servicing to avoid shock or damage
• Handle the board by the edges and avoid touching components; use anti-static precautions if available
• Some models require access behind the control panel or removal of the cabinet;

This main control board assembly manages a refrigerator's electronic controls and user interface, restoring normal temperature regulation and cycle sequencing when the original control board fails. What it does

• Controls compressor, fans and timed defrost cycles to help maintain proper cooling
• Interprets user inputs and runs the control panel/display functions
• Responds to sensors and sends signals that regulate temperature and modes
• Common symptom: display or controls are unresponsive, fridge cycles erratically, or unit won't maintain set temperature

• Disconnect power at the breaker before removing panels or wiring to avoid shock
• Take a photo of wiring before disconnecting; replace only with the exact part number
• Handle board by edges and avoid static discharge; use proper ESD precautions

This main power control board is the printed circuit assembly that supplies and manages power to a refrigerator's control systems, restoring electronic control when a failed board causes power or control issues. What it does:

• Regulates and distributes incoming power to the appliance's control circuits and displays
• Controls startup and shutdown sequences for compressors, fans and other electronic components
• Can resolve symptoms like no display, unresponsive controls, or intermittent power to components when board failure is confirmed
• Works as the central electronic interface between user controls and functional subsystems

• Disconnect power to the appliance before attempting replacement to avoid shock or damage
• Handle the board by its edges and avoid touching components to prevent static damage
• Verify connector seating and wire routing during reassembly; do not force connectors

The Control-Electric Assembly is an OEM component specifically designed for Whirlpool refrigerators. It plays a vital role in regulating and controlling the electrical functions that power the refrigerator and its components. 

Symptoms of a bad control-electric assembly include:

• The refrigerator failing to turn on or encountering temperature control issues 
• Fault codes or error messages being continuously displayed
• Inability to regulate temperature zones
• Intermittent or unreliable operation of internal lighting and fans

Causes of a bad control-electric assembly can include water damage from potential leaks, failure or malfunction of electronic components over time, or issues with power distribution circuits.  

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This transformer supplies low-voltage power used by freezer control components so the freezer's controls and related systems operate correctly. Replacing a faulty transformer can restore power to control circuits and return normal function. What it does

• Converts incoming line power to the low-voltage supply used by freezer control circuits.
• Restores power to control boards and related components when the transformer has failed.
• Can resolve symptoms such as unresponsive controls, dead lights or accessories in the freezer, and intermittent operation of freezer features.
• Works as a direct-replacement component when the original transformer is damaged or nonfunctional.

• One replacement transformer.

• Disconnect power to the appliance before removing panels or wiring; lock out power at the breaker.
• Access typically requires removing interior panels or the control housing—keep track of screws and fasteners.
• Match wiring connectors and terminal positions exactly; do not alter wiring or splice.

The Electronic Control Board is an OEM part for Whirlpool refrigerators. This component acts as the brain of the refrigerator, managing and regulating various functions such as temperature control, defrost cycles, and the operation of fans and compressors. By processing inputs from sensors and user settings, the control board ensures that the refrigerator operates efficiently and maintains the desired temperature.

Causes of a bad control board can include power surges, electrical component failures, or damage from moisture or debris. A malfunctioning control board can lead to various operational issues and inconsistent performance.

Symptoms of a bad electronic control board include:

• The refrigerator not cooling properly
• The freezer or refrigerator compartments being too warm or too cold
• The refrigerator not running at all
• Erratic or unresponsive control panel
• Unusual noises or failure to start the defrost cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.