Refrigerator Control Board

A replacement switch control board that operates the appliance's user controls and sends electronic signals to other components, restoring responsive button and selector operation for reliable use. What it does

• Routes user inputs from buttons/knobs to the appliance's control system so selections register correctly
• Powers and interfaces with displays, indicators, and other control electronics
• Common symptom: unresponsive or intermittent controls, buttons that don't work, or startup failures tied to the control panel
• Helps resolve control-related error codes when diagnostics point to the switch/board assembly

• Disconnect electrical power before servicing to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use ESD protection if available
• Access typically requires removing the control console or front panel; retain all screws and connectors
• Only install if compatibility with your model is confirmed;

This electronic control board regulates refrigerator functions like temperature, defrost cycles and display/status signaling to keep cooling and user controls operating properly. Replace a failed control board to restore normal electronic control and diagnostics. What it does

• Receives sensor inputs and directs compressor, fans and defrost components
• Manages temperature setpoints and cycles based on thermostat signals
• Controls user interface indicators and electronic readouts
• Can stop operations or cause error codes when the board fails

• 1 control board (main electronic control)

• Disconnect power before service to avoid electrical shock or damage
• Handle circuit board by edges and avoid touching components or connector pins
• Verify connectors and mounting are secure; match connectors before reapplying power

This board-switch is the user control/selector module that sends settings signals to an appliance's control system, restoring reliable selection of cook or cycle options and user-input functions. What it does

• Acts as the selector/control interface that registers knob or button selections and sends corresponding signals to the main control
• Re-establishes lost or intermittent selection responses when worn contacts or a failed switch board prevent input recognition
• Can fix symptoms such as unresponsive selector buttons/knobs, inability to change cycles or modes, or intermittent control inputs
• Works as the electrical switching/selector component rather than a full electronic control board

• One board-switch assembly as shown

• High-level replacement: power must be disconnected at the breaker or plug before access and replacement
• Handle the board by edges; avoid contact with components and use anti-static precautions if possible
• Installation may require removal of the control console or panel and basic hand tools; keep screws and connectors organized

The Refrigerator Main PCB Assembly is essential for ensuring your Samsung refrigerator operates smoothly and efficiently. This main PCB assembly manages all critical functions, including temperature regulation, defrost cycles, and cooling operations, maintaining the optimal performance of your appliance. Crafted as a genuine OEM part, it guarantees perfect compatibility with a wide range of Samsung refrigerator models, ensuring a secure fit and reliable performance. Installing the Refrigerator Main PCB Assembly helps restore full functionality to your fridge, resolving control issues and enhancing overall efficiency. Its durable construction ensures long-lasting operation, reducing the need for frequent repairs and extending the life of your refrigerator. Whether you are experiencing malfunctions or simply upgrading your applianceGÇÖs components, this genuine OEM part provides a seamless installation process and dependable results. Trust the Refrigerator Main PCB Assembly to deliver precise control and consistent operation, ensuring your Samsung refrigerator continues to provide a superior cooling experience for your kitchen.

Control defrost module

The Main Control Board is an OEM part for GE refrigerators. It serves as the central hub for managing and coordinating the various functions of the refrigerator, including temperature regulation, defrost cycles, and the operation of fans and compressors.

Over time, the main control board can fail due to electrical surges, wear and tear, or manufacturing defects. A malfunctioning control board can disrupt the refrigerator’s ability to maintain proper temperature and operate efficiently.

Symptoms of a bad main control board include:

• The refrigerator not cooling properly
• Erratic temperature fluctuations
• The refrigerator not running or turning off unexpectedly
• Unresponsive controls or display panel
• Unusual noises or clicks from the control board area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Control Board is an OEM part for Whirlpool refrigerators. As the central processing unit, this board oversees all cooling, temperature regulation and digital display operations.

The control board monitors factors like door openings, freezer and fridge temperatures using various sensors. It then directs the compressor, fans, defrost componentry accordingly.

Causes of a failed control board commonly involve progressive damage from moisture or dust infiltration over many years of service. Physical impact can potentially disrupt soldered connections as well.

Symptoms of a faulty board include:

• Inability to adjust temperature settings as desired
• Fluctuating freezer or fridge temperatures
• Fault codes appearing regularly on the LCD display

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Board is an OEM replacement part for Whirlpool bottom-mount refrigerators. It serves as the electronic control module located inside the unit.

Symptoms of a malfunctioning control board include: 

• Failure to achieve proper refrigerator and freezer temperatures  
• Sensors, displays, or timers showing inaccurate readings   
• Unpredictable fluctuations in cooling performance
• Inability to adequately regulate humidity levels 

Causes of a bad electronic control module often include failure of internal temperature or humidity sensors over extended use. Exposure to rapid fluctuations in conditions inside the fridge can potentially damage circuitry.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, and Kenmore bottom-mount refrigerators.

The Cntrl-Elec is an OEM component specifically designed for Whirlpool refrigerators. This control electrical board is responsible for operating all critical refrigerator functions such as cooling, defrosting, temperature regulation, and controlling features like the ice maker. 

Causes of a bad control electrical board can include damage from power surges or outages, moisture intrusion that causes corrosion to circuitry over time, or failure of electronic components like sensors, relays, or microprocessors. 

Symptoms of a bad control electrical board include:

• Inoperative refrigerator functions like cooling or ice-making  
• Erratic temperatures or humidity inside refrigerator sections
• Fault codes or error messages appearing on control displays

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a refrigerator main control board. It manages and monitors the temperature settings of the appliance, including defrosting and cooling times. If the main control board is damaged or no longer working, the refrigerator or freezer could become too warm or cool, stop defrosting, or no longer start. In this situation, the part will need to be replaced.The only tool needed to replace the main control board is a flat blade screwdriver. First, make sure the refrigerator is unplugged to avoid it coming on during the replacement process. Next, two screws should be removed where the door closes before the light shield is taken off by pushing it to the back of the appliance. Find the access panel holding the main control board and apply pressure to pull it away. Free the pegs and move the hinges toward the front. Finally, install the connectors and take out the part before replacing it with a new component.This main control board is designed as an OEM replacement part sourced directly from the manufacturer. It is sold as a single component and fits several models of refrigerators from Ikea, Maytag, and Whirlpool.