Refrigerator Drawer, Shelf, Pan

The Refrigerator Meat Pan Hanger, Right Side is an OEM part for Frigidaire refrigerators. It is specifically designed to support the meat pan on the right side, ensuring it hangs securely and slides smoothly when accessed. This component is crucial for maintaining the structural integrity of the refrigerator's internal organization, allowing for efficient storage and easy access to meats and other perishables.

Symptoms of a bad Refrigerator Meat Pan Hanger include:

• The meat pan drooping or not holding in place,
• Difficulty in sliding the pan in or out,
• Visible damage or breakage of the hanger.

Causes of meat pan hanger failure typically involve excessive weight in the pan, frequent and forceful use, or physical impacts that could weaken or break the hanger.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Vegetable Pan Cover is an OEM replacement part for GE refrigerators. This transparent cover fits over the vegetable/crisper drawers, helping to maintain the ideal humidity levels and keep produce fresh for longer periods. The pan measures approximately 24 inches wide by 19 inches deep.

Symptoms of a bad vegetable pan cover include:

• Crisper drawers drying out too quickly, causing produce to wilt or spoil prematurely
• Inability to properly control humidity levels within the crisper compartment
• Cracks or damage to the cover, preventing an airtight seal

Causes of needing to replace the vegetable pan cover can range from physical damage due to impact or mishandling, to general wear and tear over time that can cause warping or degradation of the plastic material.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Deli Drawer Shelf Frame is an OEM part for Whirlpool refrigerators. This frame serves as the structural support for the deli drawer, holding it in place and providing a smooth surface for the drawer to slide in and out easily. Additionally, it acts as a shelf for items stored above the drawer, maximizing space utilization within the refrigerator. 

Symptoms of a bad Deli Drawer Shelf Frame include:

• Cracks or breaks in the frame that compromise its structural integrity.
• The drawer sagging or sticking due to a misaligned or damaged frame.
• Difficulty in sliding the drawer in and out smoothly.
• Unstable storage as items on the shelf above the drawer shift or fall.

Causes of a bad shelf frame can include overloading the drawer or shelf with too much weight, general wear and tear from frequent use, or environmental factors such as moisture and temperature changes that can warp or degrade the materials.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Shelf Bin is an OEM part for Whirlpool refrigerators. It provides storage space on the refrigerator door, allowing for easy organization and access to frequently used items like condiments, beverages, and smaller containers. The bin measures approximately 17" wide x 7" deep x 4" high.

You should replace this door shelf bin if it becomes cracked, broken, or loses its ability to securely hold items. Over time, regular use and the weight of stored items can cause the plastic to weaken or break.

Symptoms of a bad door shelf bin include:

• Cracks or visible damage
• Difficulty in securing items within the bin
• The bin detaching or falling off the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Crisper Cover Frame is an OEM part for Frigidaire refrigerators. This parts serves as the structural frame for the crisper drawer section of the refrigerator, providing support and a level surface for the crisper drawers. It typically sits above the crisper drawers, holding the glass shelf in place and separating the drawers from the rest of the refrigerator. 

Over time, the crisper cover frame can become damaged or wear out due to frequent use, overloading, or accidental impacts.  

Symptoms of a bad Crisper Cover Frame include:

• Visible cracks or breaks in the frame
• Difficulty fitting or securing the glass shelf properly
• The crisper drawers not sliding in and out smoothly due to misalignment or instability of the frame
• Sagging or warping of the frame, affecting its ability to support the shelf and drawers

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This slide rail is an OEM replacement part for GE refrigerators. The slide rail measures 1.25 inches in height, 2 inches in width, and 16 inches in depth.  This durable and reliable slide rail ensures smooth and effortless drawer operation. 

Causes of failure involve repeated impact stresses absorbing the weight of the heavy door opening and closing potentially thousands of daily times over 10-20 years. 

Symptoms of a faulty slide assembly include:

• Difficulty fully opening or closing the oven door  
• Binding, jamming or misalignment of door movement
• Visible bending or warping of metal slide track components
• Loose fasteners connecting assembly to cabinetry 

This OEM replacement part is also compatible with Hotpoint and RCA electric ranges as well.

NOTE: For the right-hand side order WR72X240. For the slide bearing order WR1X2048.

The Crisper Drawer is an OEM part for Whirlpool refrigerators. This drawer provides the best storage environment for fruits and vegetables, helping to maintain their freshness for longer periods. It works by controlling the humidity levels within the drawer, reducing the chances of premature spoiling. 

The crisper drawer can deteriorate over time from overloading, impacts, or aging, affecting humidity control and leading to food spoilage.

Symptoms of a bad Crisper Drawer include:

• Cracks or breaks in the drawer that compromise its structural integrity
• Difficulty in sliding the drawer in and out due to damage or warping
• Excessive moisture accumulation inside the drawer, indicating a failure in humidity control
• Visible signs of wear that affect the drawer's appearance and functionality

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Meat Pan Cover Frame is an OEM part for Frigidaire refrigerators. This integral component serves as the structural support for the meat pan cover, providing a sturdy base that holds and protects the meat pan itself. Positioned within the refrigerator's interior, it ensures the meat pan is securely placed, facilitating efficient cooling and storage of meats and other perishables.

Causes of a bad part can include physical stress from overloading, impacts during cleaning or moving, and material fatigue over extended periods of use. Addressing these signs promptly can prevent further damage to your refrigerator's interior components.

Symptoms of a bad Meat Pan Cover Frame include:

• Visible cracks or breaks in the frame 
• Difficulty sliding the meat pan in or out due to misalignment caused by frame damage.
• Unusual noises when moving the meat pan 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Refrigerator Door Shelf Rail is an OEM part for GE refrigerators. This component secures items on the refrigerator door shelves, preventing them from falling out when the door is opened or closed. The bar measures approximately 22” x 7”.

Common causes of a bad shelf rail include repeated impact from heavy items, cracking due to temperature fluctuations, or wear and tear from frequent use.

Symptoms of a bad refrigerator door shelf rail include:

• Items falling off the door shelf
• The rail appearing loose or unstable
• Visible cracks or breaks in the rail
• Difficulty in securely attaching the rail to the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rear Crisper Cover Support is an OEM part for Frigidaire refrigerators. It plays a key role in supporting the crisper cover, which is the shelf that holds the crisper drawers. This part ensures that the cover remains stable and level, providing reliable support for storing fresh produce and other items in the crisper drawers.

Symptoms of a bad Rear Crisper Cover Support include:

• The crisper cover sagging or failing to stay in place
• Difficulty sliding the crisper drawers in and out
• Noticeable instability or wobbling of the cover
• Cracks or breakage where the support attaches to the refrigerator wall

Causes of a bad Rear Crisper Cover Support can involve regular wear and tear, excessive weight placed on the crisper cover, or accidental damage during cleaning or handling.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This Crisper Drawer is an OEM replacement part for Frigidaire refrigerators. It is designed to store your fruits and vegetables, keeping them fresh and crisp for longer.

Symptoms of a bad crisper drawer include:

• Excessive moisture in the drawer
• Difficulty opening or closing the drawer
• Visible cracks or damage on the drawer

Causes of crisper drawer issues generally stem from overloading, which can lead to cracks and damage, or wear and tear over time that affects the drawer's smooth operation and sealing capabilities.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Snack Pan Rail is an OEM part for GE refrigerators. It is an integrated shelf component located in the fresh food door that secures GE snack trays and additional food storage accessories. The metal rail measuring approximately 14 1/2" L x 11" W, provides sturdy support within the refrigerator opening.

Causes of a bad snack pan rail can include dents, warping, or cracking that compromises its structural stability over time. Improper handling may also cause damage.

Symptoms of a bad snack pan rail include:

• Trays and pans failing to stay securely in place on the rail
• Gaps appear where accessories can fall out
• Difficulty removing or inserting snack trays smoothly
• Strange noises or vibrations emitting from the rail area

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Crisper Drawer Cover is an OEM part for Frigidaire refrigerators. This component acts as a shelf while also covering the crisper drawers where fruits and vegetables are stored. It's designed to support weight and maintain an optimal environment in the crisper drawers by helping to regulate humidity and temperature. 

Over time, the Crisper Drawer Cover can become cracked, warped, or damaged due to excessive weight, accidental impacts, or temperature fluctuations. Such damage can compromise its structural integrity and functionality, leading to potential issues with drawer alignment or difficulty in sliding drawers in and out.

Symptoms of a bad Crisper Drawer Cover include:

• Visible cracks or stress marks that can weaken the cover's structure.
• Warping or bending, which can interfere with the smooth operation of the crisper drawers.
• Difficulty in maintaining consistent humidity levels within the drawers

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Refrigerator Door Rack Support is an OEM replacement part for Frigidaire refrigerators. This component provides structural reinforcement and stability for the racks or shelves mounted on the interior of the refrigerator door.

Symptoms of needing to replace the door rack support include:

• Sagging or unstable door racks
• Difficulty in removing or inserting the racks
• Visible cracks, damage, or deformation of the support

Causes of a faulty door rack support can include accidental impact or mishandling, excessive weight or stress on the racks, or general wear and tear over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Pan Bottom Assembly is an OEM part for GE refrigerators. This component is the bottom drawer or bin in the refrigerator, typically used for storing fruits and vegetables at optimal humidity levels. It slides into the lower part of the refrigerator, offering convenient storage that helps keep produce fresh longer by maintaining a separate climate from the rest of the refrigerator. It measures approximately 22 inches wide, 15 inches tall, and 19 inches deep.

Symptoms of a failing Pan Bottom Assembly include:

• Difficulty in sliding the pan in and out
• Cracks or damage that can hinder its ability to retain proper humidity levels
• Warping or distortion that affects how it fits within the refrigerator structure
• Accumulation of moisture or leakage below the drawer

Causes of a bad pan bottom assembly often involve excessive weight being placed inside the drawer, frequent use which can lead to wear and tear, or temperature fluctuations that cause the material to weaken or deform over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drawer Cover is an OEM part for Frigidaire refrigerators. It is designed to cover and protect the drawers within the refrigerator, providing a stable surface and helping to maintain the optimal temperature and humidity levels for the stored food.

Over time, the drawer cover can become damaged or worn out. Causes of a bad drawer cover can include frequent use, heavy loads placed on top of the cover, or accidental impact or cracks.

Symptoms of a bad Drawer Cover include:

• Cracks or breaks in the cover
• Difficulty sliding the drawers in and out
• Reduced effectiveness in maintaining drawer temperatures and humidity

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Does not include the wheel, part number 5304508016