Refrigerator Ice Bin, Bucket, Or Tray

The Container is an OEM part for Whirlpool refrigerators, specifically designed to offer a dedicated storage solution within the appliance. This container might typically be used for organizing items such as fruits, vegetables, meats, or any other food items that require separate storage to maintain freshness and prevent cross-contamination. 

Causes of these symptoms often stem from overloading the container beyond its capacity, normal wear and tear over time, or damage from cleaning and handling.

Symptoms of a bad Container include:

• Cracks or breaks that compromise the container's ability to hold items securely
• Warping or damage that prevents the container from fitting properly in its designated space
• Difficulty in sliding or maneuvering the container, which could indicate a problem with its design or fit

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replace a cracked or jammed ice bin with this bucket and auger assembly. It stores the ice and uses the auger to move it toward the dispenser chute, restoring smooth, reliable through-the-door ice dispensing.

• Holds harvested ice in the freezer compartment
• Auger engages the drive to move ice toward the dispenser chute
• Helps restore consistent ice delivery through the door
• Typical symptoms: no ice dispensing, weak or intermittent dispense, cracked/broken bucket, grinding or clicking during dispense

• Unplug the refrigerator before servicing
• Empty the old bin and pull the assembly straight out
• Align the rear auger coupling with the drive and seat the assembly fully
• Briefly test the dispenser to confirm proper auger engagement

The Ice Bucket and Auger Assembly is an OEM part for GE refrigerators. This part stores ice and includes an auger mechanism that helps dispense the ice through the refrigerator's ice dispenser.  

Causes of a bad ice bucket and auger assembly include cracks in the bucket, worn or broken auger blades, or issues with the auger motor.

Symptoms of a bad ice bucket and auger assembly include:

• Ice not dispensing properly or at all
• Unusual noises when the dispenser is activated
• Visible damage to the bucket or auger
• Ice clumping or jamming in the bucket

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is an ice bin that is used on refrigerator and freezer units. The purpose of this part is to store the ice that has already been made so that it is ready for dispensing. The auger is included with this part, which is the component that drives the ice out of the freezer for dispensing. Over time, the white plastic material that the bin is made of may begin to crack or break due to exposure to extreme temperatures over time. If this is the case, it will need to be replaced. If the auger no longer functions, it could have become damaged and this part will also replace the auger itself. Wear work gloves when replacing this part.This ice bin is compatible with refrigerator and freezer units that have been manufactured by Kenmore Elite, Kenmore Pro, Kenmore, and Frigidaire. It is sold individually. This part is sourced directly from the manufacturer.

This ice container assembly stores ice in the freezer and feeds it to the dispenser on demand. Replacing a damaged or worn bin restores smooth, consistent ice dispensing and helps prevent jams and poor delivery. What it does:

• Holds and organizes ice in the freezer for dispensing
• Uses the internal auger to move ice toward the chute when dispensing is activated
• Interfaces with the crusher/cube selection in applicable designs
• Common symptoms of failure: no or intermittent ice dispensing, grinding during dispense, jammed ice, or visible cracks/broken tabs on the bin

• Includes: 1 ice container assembly

• Disconnect power to the refrigerator before servicing
• Remove the old bin and discard any ice; allow any frost buildup to thaw to avoid forcing parts
• Align the auger drive with the coupling and seat the bin fully before closing the door
• After installation, make fresh ice and discard the first batch

This ice container stores the ice your refrigerator makes and interfaces with the dispenser drive so cubes reach the door. Replacing a cracked or worn bin restores smooth, sanitary ice storage and dependable dispensing.

• Holds and organizes ice beneath the icemaker
• Guides cubes to the dispenser drive for cube or crushed delivery on models with a dispenser
• Helps prevent spills and stray ice in the freezer
• Common failure signs: cracked bin, ice not dispensing, clumping/jamming, or frost/shavings around the bucket area

• Unplug the refrigerator or switch off power before servicing; empty the old bin
• Slide the bin straight out and clear frost/debris from rails or the mounting area
• Align the drive connection (if present) and fully seat the new container so it sits flush or latches
• Restore power and test the ice dispense function

This ice container assembly stores ice in the freezer and interfaces with the dispenser to deliver cubed or crushed ice. Replacing a cracked or worn bin restores smooth, consistent ice dispensing performance.

• Holds harvested ice and mounts in the freezer or door for easy access
• Interfaces with the dispenser drive to move ice through the chute
• Supports cubed/crushed dispensing when equipped
• Common symptoms of failure: no ice dispensing, ice only crushes or won't crush, visible cracks or broken/stripped drive engagement

• Disconnect power to the refrigerator before servicing
• Remove the existing bin; empty any remaining ice and clear the chute
• Align the new container with the drive coupler and rails; slide in until fully seated
• Restore power and test ice dispensing (cubed/crushed if equipped)

This is the complete horizontal ice dispenser bucket assembly with crusher. It fits 22 cubic foot refrigerator models. For 20 cubic foot models order WP2209778. For 25 and 27 cubic foot models order WPW10312300.

Replace a cracked or worn bin to help restore dependable dispensing. This ice container assembly holds ice from the icemaker and, when you press the dispenser, moves it toward the chute for cube or crushed ice. What it does:

• Stores and contains ice in the freezer until dispensing
• Interfaces with the auger drive to feed ice toward the dispenser chute
• Works with the crusher/cube selection mechanism (model dependent)
• Common symptoms include no or slow dispensing, cracked/leaking bin, or ice jams/clumping

• 1 ice container assembly

• Disconnect power to the refrigerator before servicing
• Empty the old bin and pull it straight out of the freezer compartment
• Transfer any reusable parts from the old assembly
• Align the drive coupling and slide the new container fully into place; restore power and test dispensing

This ice container assembly stores ice in the freezer and feeds it to the dispenser. Replacing a cracked or stripped bin helps restore smooth, reliable dispensing of cubed or crushed ice from your refrigerator.

• Holds finished ice beneath the icemaker and connects to the auger drive to move ice to the door chute
• Internal mechanism advances ice and enables crushed-ice operation when selected
• Helps resolve no or intermittent ice dispensing, auger slippage, or inconsistent cubed/crushed output
• Direct replacement for damaged or cracked ice buckets

• Disconnect power and turn off the icemaker; wear cut-resistant gloves
• Lift out the old bin; discard clumped ice and clear any jams in the chute
• Align the auger drive coupling and slide the new assembly fully into place
• Restore power and test both cubed and crushed dispense modes

Restore reliable ice dispensing with this ice dispenser bucket. It holds the icemaker's ice supply and interfaces with the dispenser drive so cubes or crushed ice can feed smoothly through the chute when you press the dispenser lever.

• Holds ice produced by the icemaker and positions it for dispensing
• Engages with the drive to move ice toward the chute
• Can help resolve weak/no ice dispensing or frequent ice jams
• Common failures include cracks, broken tabs, or worn drive engagement points

• Unplug the refrigerator and wear cut-resistant gloves before servicing
• Remove the old bin from the freezer, empty it, and slide in the new bucket; ensure the drive coupling fully engages
• Restore power, allow the icemaker to produce ice, and test dispensing

This ice bucket and auger assembly stores the ice your refrigerator makes and drives it forward for dispensing. Replacing a cracked bin or worn auger restores smooth, reliable ice delivery and helps reduce jams, clumping, or grinding.

• Stores the ice supply inside the freezer
• Auger advances ice forward to the dispenser chute
• Restores consistent dispensing when the bucket or auger is damaged
• Symptoms can include little or no ice dispensing, jams, or grinding noises

• Disconnect power to the refrigerator and turn off the icemaker before service
• Remove the old bin, empty remaining ice, and clear any frost or blockages in the chute
• Align the auger drive coupling with the dispenser drive when installing the new bin
• Restore power and test ice dispensing

This refrigerator ice bucket stores ice made by the icemaker and positions it for dispensing. Replacing a cracked or warped bin restores smooth ice flow and helps prevent jams, spills, and mess inside the freezer.

• Holds and contains ice cubes in the freezer for easy access and dispensing
• Interfaces with the auger/crusher assembly in dispenser-equipped models
• Helps correct issues like ice jamming or inconsistent dispensing caused by a damaged bin
• Addresses visible damage such as cracks, chips, warping, or a bucket that won't seat properly
• Can reduce stray ice or moisture under/around the bin when the original is compromised

• Unplug the refrigerator and turn off the icemaker/water supply before starting
• Remove the old bin; transfer any auger/crusher components from the original if your model uses them
• Seat the new bucket fully so it latches/aligns correctly with the drive
• Restore power and verify proper dispensing operation

This upper ice bin holds ice and engages the auger/crusher assembly for dispensing from the freezer. Replacing a cracked or worn bin restores smooth cubed or crushed ice delivery and reduces jams and spills. What it does:

• Holds and feeds ice to the auger/crusher for dispensing through the door
• Aligns and supports the auger drive and crusher components
• Helps maintain proper ice flow and dispensing performance
• Common symptoms: ice won't dispense or crush, bin won't seat/latch, visible cracks or broken tabs, unusual grinding from the bin area

• One upper ice bin

• Disconnect power before servicing; remove the ice bucket from the freezer
• Empty remaining ice and transfer any reusable internal components from the old bin to the new bin as required by your model
• Ensure the auger drive yoke engages and the bin seats fully before restoring power
• Handle carefully; overtightening fasteners can crack the new bin

This is the complete ice container assembly for the dispenser. It stores ice and drives cubes to the chute so your dispenser can deliver ice reliably and without jams.

• Holds finished ice in the freezer and feeds it to the dispenser
• Integrated auger moves and helps break up ice for consistent dispensing
• Common failure signs: ice not dispensing, auger not turning, loud grinding, or cracked/leaking bucket
• Restores proper in-door ice dispensing performance

• Unplug the refrigerator and remove the ice bin from the freezer door or shelf
• Transfer any remaining ice to a cooler; let any frost melt to avoid damage
• Align the drive coupling and slide the new bin fully into place
• Restore power and test ice dispense for cube and crush functions

This ice bucket stores the ice your refrigerator's icemaker produces and keeps it organized and ready to use. Replace a cracked or missing bin to restore proper ice storage and help prevent spills, jams, and contamination.

• Collects and stores ice cubes produced by the icemaker
• Positions under the icemaker so cubes drop cleanly into the bin
• Slides in/out for easy access and smooth operation
• Common symptoms: cracked or warped bucket, ice spilling or jamming, difficulty seating the bin, plastic fragments in ice

• Unplug the refrigerator and switch the icemaker off before servicing
• Remove the old bucket and empty any ice; transfer any reusable parts from the original if applicable
• Align and fully seat the new bucket on the guides/tabs
• Restore power and turn the icemaker back on; allow time to make ice