Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Roper Washer Parts

Best Seller
Roper Appliance Touch-Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017

Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.

Do-It-Yourself Stories from Customers like You Chipped paint   Thomas S. • Middletown , DE • September 03, 2014

Touch up paint Read more

More
$11.78
Compare At:
$14.02
You Save:
$2.24

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage. 

Symptoms needing for Appliance Spray Paint include:

  • Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
  • A desire to refresh or update the appearance of the appliance without the need for complete replacement
  • Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

 

Do-It-Yourself Stories from Customers like You Leaking diaphragm   Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

More
$24.95
Compare At:
$29.94
You Save:
$4.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Washer Agitator Washer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8543666

Fix a washer that won't spin or agitate properly. This agitator washer acts as a bearing between the agitator and shaft. DIY repair in 10-30 minutes.

Do-It-Yourself Stories from Customers like You Wouldn't spin   Douglas M. • Forsyth , MO • October 27, 2015

I watched a few on line videos. Found 2 easy things to check. The motor coupler then the clutch. It took me about 30 minutes to get everything apart and find out which problem it was. Went on line to Appliance Pros.com and ordered the new clutch.It came in 2 days. Took less than 30 minutes to get it on and get everything back together. It was awesome. Read more

More
$13.95
Compare At:
$16.60
You Save:
$2.65

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Front Leveling Foot
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10001130

The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.

Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.

Symptoms of a bad Front Leveling Foot include:

  • The washing machine rocking or wobbling during operation
  • Increased vibration and noise
  • The washer being unlevel, affecting wash performance
  • Difficulty in adjusting the foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Shakes and moves
See more...
Do-It-Yourself Stories from Customers like You It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle   Carl W. • Glendale , AZ • June 27, 2015

REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS... Read more

More
$6.41
Compare At:
$7.63
You Save:
$1.22

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Washer Spin Tube Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546462

Supports the spin basket and reduces friction during operation. Replace if you hear grinding, thumping, or squealing noises during spin cycle. Confirm fit.

Do-It-Yourself Stories from Customers like You Leak (found to be tub seal) and extreme spin vibration.   Paul H. • Lakewood , CA • June 26, 2021

First, DO NOT call Sears for parts, their call center knows nothing about the product. App-Pros are the best for help and the right parts. I figured to repair, replace all seals and any item that shows need to and all items that have to do with the spin that may be bad. Repair videos great help. I will start from the "bottom" up, the repairs were not done in this order, just a list of what I did and notes. Replaced-- motor drive coupling, (checked out transmission ok), thrust washer,... Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Washer Internal Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: W10899966

Internal drain hose routes water from the washer tub to the external drain. Replace if cracked, leaking, or damaged from constant use or obstructions.

Do-It-Yourself Stories from Customers like You Leaking water   Jeffrey M. • Medina , OH • November 15, 2014

I had previously replaced the transmission in my two year old Whirlpool Cabrio washing machine. Overall it was in good shape but gets heavy use. That repair was approximately $200 and worked for several months. Recently it began leaking. At first I thought it was the tub-to-shaft seal. I replaced this part but it was still leaking. It turns out it was the simplest of things... The drain hose was not connected very well! I replaced the drain hose ($11 part) and while I was at it I... Read more

More
$27.37
Compare At:
$32.84
You Save:
$5.47

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Washer Vacuum Break
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3360977

Washer slowly filling or dripping when off? A faulty vacuum break allows water to siphon back into the drum. Takes 30 minutes with our video guide.

Do-It-Yourself Stories from Customers like You My washer was rotting away   Robert L. • Fulton , NY • October 04, 2014

My 15 year old whirlpool washer top was rotting away and my wife was about to buy a new one. a 1 min search on google brought me to this site and within 5 mins found all the parts I needed, Received my order in 3 days and now we're back in business for a total cost of $159 instead of $500 to $600. Will use this site again and have told a few people already. Thanks Rob Read more

More
$46.35
Compare At:
$55.62
You Save:
$9.27

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Door Switch Lever
Genuine Whirlpool part
By: Whirlpool
Part Number: WP691581

The Door Switch Lever is an OEM part for Whirlpool dryers. It plays a vital role in ensuring the dryer only operates when the door is securely closed by engaging with the door switch to signal the door's status.

Causes of a bad door switch lever can include normal wear and tear from repeated use, physical damage from accidental impact, or deformation from heat and humidity inside the dryer. A faulty lever can prevent the dryer from starting or stopping correctly.

Symptoms of a bad door switch lever include:

  • Dryer not starting
  • Dryer stopping mid-cycle
  • Door not latching properly
  • The dryer continuing to run with the door open

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Won't start
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You The lever to the door switch broke.   Valerie M. • Rochester , NH • April 02, 2014

First, I rooked on YouTube for a video on how to fix it. The video brought me to a very helpful video with a link to your website. We have had this dryer since we bought the house 10 years ago and the thought of buying something new, that wasn't made as well was a dreaded thought. I went on the website, entered the model number of my dryer and then a search link for a parts search. Not knowing the part number, I was able to find the exact thing I needed. It was amazing and so easy! Had... Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Agitator Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3355758

The Agitator Cap is an OEM part for Whirlpool washing machines. It fits on top of the agitator and helps secure the agitator components, ensuring proper functioning during the wash cycle. This cap is essential for maintaining the agitator's efficiency and preventing water from entering the agitator assembly.

Causes of a bad agitator cap can include wear and tear from regular use, cracking or damage from impacts, or degradation due to exposure to detergents and water over time.

Symptoms of a bad agitator cap include:

  • The cap being loose or not fitting properly
  • Water leaking into the agitator assembly
  • Excessive noise during the wash cycle
  • Reduced agitation performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Broken upper section of our Whirlpool agitator also known as a filter   David I. • Heathsville , VA • September 04, 2019

Simply lift up the old filter and cap and discard it. The new assembly simply pushes down and on to the agitator base. It stays in place by clicking over a raised perimeter rib on the base. This is the easiest repair (short of screwing in a light bulb) that one could do. The hardest part was to identify which parts I needed to purchase. The parts associate at Appliance Pros was terrific in tracking down what was needed. Read more

More
$9.63
Compare At:
$11.46
You Save:
$1.83

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Washer Control Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10199989

If your washer won't advance cycles, stops mid-wash, or fills incorrectly, the control timer may be faulty. Moderate DIY repair, replaces defective timer.

Do-It-Yourself Stories from Customers like You Washer stopped in the middle of a cycle tub was full of water and wet clothes   Richard J. • Harwich , MA • July 09, 2015

Based on symptoms it looked like the timer was not working. I did a web search to confirm this and found your web site. Entering the model number of the washer (Whirlpool) I found the timer and related information. This confirmed my diagnosis. I also looked at the video on how to change the timer. This was invaluable! The video saved me hours and probably a washing machine. I ordered the timer, it arrived as promised, I installed it per directions and the machine works... the video makes... Read more

More
$169.37
Compare At:
$201.55
You Save:
$32.18

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Liquid Fabric Softener Dispenser
Genuine Whirlpool part
By: Whirlpool
Part Number: 63580

The Liquid Fabric Softener Dispenser is an OEM part for Whirlpool washing machines. It is designed to dispense fabric softener at the appropriate time during the wash cycle, ensuring that your laundry comes out soft and fresh. This liquid fabric softener dispenser fits most 1984 and newer 24 and 27 inch washing machines. This part inserts into the top of the agitator. Laundry bag AP4354945 is also recommended to prevent damage to delicates clothing.

Causes of a bad fabric softener dispenser can include clogs from fabric softener residue, wear and tear from regular use, or mechanical failure of the dispenser mechanism. If the dispenser is not functioning correctly, it can lead to ineffective softener distribution.

Symptoms of a bad fabric softener dispenser include:

  • Fabric softener not dispensing during the cycle
  • Residue buildup in the dispenser compartment
  • Leaks or drips from the dispenser
  • Fabric softener remaining in the dispenser after the cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Washing machine didn't have fabric softener dispenser and no option for adding fabric softener fluid   Victor O. • El Paso , TX • May 05, 2014

Purchased a fabric softener dispenser from appliance parts pros removed cap from agitator and replace with the new fabric softener dispenser and problem solved. Read more

More
$23.61
Compare At:
$27.86
You Save:
$4.25

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Fabric Softener Dispenser
Genuine Whirlpool part
By: Whirlpool
Part Number: 8575076A

The Fabric Softener Dispenser is an OEM replacement part specific to  Whirlpool washing machines. It is responsible for accurately dispensing the appropriate amount of liquid fabric softener during the rinse cycle to soften and protect clothes. 

Causes of a bad fabric softener dispenser can include clogging of the dispenser or dispensing mechanisms from residue buildup, cracks or openings in the plastic housing allowing for leaks, broken or malfunctioning electronic components controlling the dispensing process.

Symptoms of a bad fabric softener dispenser include:

  • Improper dispensing of fabric softener resulting in excess or insufficient softener  
  • Leaking or dripping of softener from the dispenser housing
  • The dispenser door or lid not opening or closing properly
  • Liquids dispensing at the wrong times during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

Do-It-Yourself Stories from Customers like You Amana NTW4516FW washer did not come with a fabric softener dispenser   Celeste M. • Austin , TX • March 17, 2018

I purchased part #85753076A, Whirlpool Fabric Softener Dispenser. Popped off the top from the agitator and popped on the fabric softener dispenser. It took me less than a minute and it works perfectly! No more missing the rinse cycle!!! Read more

More
$24.68
Compare At:
$29.37
You Save:
$4.69

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Washer Bleach Dispenser Cup
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3362952

Cracked or broken bleach dispenser cup causing leaks or improper dispensing? This replacement cup restores proper bleach delivery. Easy 10-minute fix.

Do-It-Yourself Stories from Customers like You Broken bleach dispenser cup   Samuel S. • Harrisburg , PA • March 15, 2016

Replaced with new part. 5 minutes. Read more

More
$8.56
Compare At:
$10.10
You Save:
$1.54

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Washer Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10096921

Drain hose routes wastewater from your washer tub to household plumbing. Replace if cracked, leaking, worn through, or damaged from wear or friction.

Do-It-Yourself Stories from Customers like You Washing machine not draining completely   Kenneth L. • Telford , PA • October 16, 2016

I searched YouTube and found several videos that helped me diagnose the most probable cause. I learned how to open the cabinet and access the parts from the videos. I ordered a new discharge hose and a replacement pump. The parts came in the next day with the standard shipping option! It turned out that the old discharge hose was blocked. I decided to replace the pump also since I had the machine open and the new pump was only $22. It's amazing what you can learn online! Read more

More
$54.25
Compare At:
$65.10
You Save:
$10.85

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Knob
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10711289

The Knob is an OEM replacement part for Whirlpool washers and dryers. The control knob lets you control cycle settings. Remove the knob by pulling it straight off its post.

Causes of a bad knob can include wear and tear over time resulting in loose or unstable function, cracks or chips in the plastic housing, or damage due to impact or abuse during removal from the post.

Symptoms of a bad knob include:

  • Difficulty rotating or selecting settings
  • Settings that do not stay in place after selection
  • Cracked or broken knob housing
  • Knob constantly moving out of the desired setting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer knob broke off. The timer was going out   Steven J. • San Antonio , TX • June 17, 2023

I followed YouTube for instructions. Had a slight problem removing stems, but got it done. Read more

More
$9.63
Compare At:
$11.56
You Save:
$1.93

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Roper Washer Cover Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3349985

Prevents water leaks between washer cover and tub during wash cycles. Replace if leaking or water escapes during washing. Verify fit with model number.

Do-It-Yourself Stories from Customers like You Washer would not spin   Joseph S. • La Grange , KY • February 14, 2016

Disassembled and confirmed the clutch was bad. Also noticed a slight leak from the transmission shaft seal. Ordered replacement clutch, seal and oil from appliancepartspros.com. The parts arrived very quickly and exactly as ordered. Their repair videos were very accurate and made the job easy. I accomplished a quality repair at a reasonable cost. My thanks to the folks at appliancepartspros.com for making it possible! Read more

More
$20.38
Compare At:
$24.46
You Save:
$4.08

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store