Samsung Parts

Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more

I ordered the replacement parts and simply installed them Read more

I am so blessed. I went online. Found the brackets. Watch the video for the brackets I chose. And lucky me. I did not have to pull the dishwasher out. The installer did not have it flush under the counter. So I was able to pull the dishwasher forward unhook the damage brackets and insert the new. Put the dishwasher back in. Two screws. Now the balanced and secure dishwasher washes better than ever and I did not have to pay an extraordinary fee for a repairman. I'm 68 and take care of a 72 year... Read more

• Not drying dishes properly
• lights flashing or blinking

Number one was turn the power to the dishwasher off. I disconnected the hoses under the sink. The dishwasher had to be pulled out from the cabinet. The old heating element easily came out and the new one put in its place. The instructional video made the repair very easy. Read more

• Will not tumble

Had to replace the drum rollers, idler roller and belt. Machine has never been taken apart so it was a learning event as well as cleaning all the internals components. Parts that were purchased fit fine, no problem with figment. More time was spent oncleaning and prepping the machine for the new parts Read more

My Samsung refrigerator was running great until we lost power from a bad rain storm. When power did return 4 hours later ice was being made by ice maker but would never pop out into ice bin ice would just stay in the maker and jam up. Well i had the idea to just hey why not buy a new ice maker 100.00 i can handle that simple plug and play well i was so excited with my new ice maker when it arrived i just had to hurry and install first two times ice was made i was like yay but then all the... Read more

We used the AP5306646 Assembly Cover part to replace the dispenser portion of the unit. There is a video on YouTube where the person explains how to get the old unit out. It was 1 screw and then a pulling motion. It takes a little bit of strength and finesse but it came out like the video. Be careful unhinging the wiring harness from the main control unit, you definitely do not want to cut or break any of the wires on either side. Use small fingers to squeeze the clip's release hinge. Getting... Read more

We took apart the filter and scrubbed out all effected areas. During the process we ended up damaging the original filter and needed to order a new one which is where APP.com came in. We were able to restore our dishwasher to working condition the next day as the shipping was extremely quick. Read more

Replaced both left and right ropes Read more

Replaced ice dispenser solenoid Read more

Ordered the part and swapped it out using your video. Read more

Order the part from appliance parts pro.com in which I found on the internet Read more

Called sears for repair. Diagnosed that the ice maker was not allowing water to enter in when the cycle was complete. I saw that it was a simple fix, and saved about $300 by doing it myself. Order the ice maker from appliancePartsPros.com and simply replaced the ice maker myself - easy peasy. Side note, the parts ordered from the site was delivered within 24 hours when I didn't select expedited shipping. I was amazed at the timely delivery. Read more

• Will not drain

Removed upper frig & lower freezer back evaporator covers to get to the frost buildup on the evaporator assembly. I then used a paint stripper heat gun to melt the ice build up caution should be used to keep the gun moving around as not to damage Wires,Eva,Sensor's. After 15 to 20 min of clearing frost I was ready to replace Drain Plate's & Thermal fuse's. When I had removed the old Defrost Thermal fuse's in the refrigerator & the freezer they looked different! They had an insulating foam... Read more