Dryer Touch Pad

This back panel assembly replaces a damaged or missing rear cabinet panel to protect internal components and keep the unit's cabinet aligned and secure. Restores a clean fit and helps reduce rattles from a loose or bent back. What it does:

• Encloses and protects internal wiring and components at the rear of the unit
• Provides mounting points for rear hardware and brackets
• Helps maintain cabinet alignment and structural rigidity
• Can reduce noise from vibration when the rear panel is properly secured

• One back panel assembly

• Disconnect power before servicing; if applicable, shut off gas supply
• Pull the unit forward to access the rear; wear cut-resistant gloves—edges can be sharp
• Retain and transfer any clips, ground straps, or grommets from the old panel
• Route wires carefully and tighten fasteners evenly so the panel sits flush

The Back Panel Assembly is an OEM part for GE dryers. It provides structural support and protection for the internal components of the dryer, including the control board, wiring, and venting system. This panel is designed to fit securely at the rear of the dryer, maintaining the integrity and safety of the appliance.

Causes of a bad back panel assembly can include exposure to moisture, physical impacts, or general wear and tear over time. A compromised back panel can lead to issues with the dryer’s operation and may pose safety hazards.

Symptoms of a bad back panel assembly include:

• Visible dents or holes in the panel
• Rust or corrosion on the panel surface
• Loose or misaligned panel causing vibrations or noise
• Difficulty in securing the panel properly during maintenance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This backsplash assembly with graphics replaces the rear control panel on compatible dryers. It restores a rigid mounting surface and clear cycle labeling for the timer and switches, improving appearance and helping the controls align and operate properly.

• Mounts and aligns the timer and switch controls on the console
• Provides printed cycle and option identifiers for accurate selection
• Helps resolve cracks, dents, broken tabs, or missing/illegible markings on the original panel
• Can reduce rattling or loose-feeling knobs when the old panel is damaged

• Disconnect power; turn off gas supply for gas models.
• Remove control knobs and console screws; lift off the old backsplash.
• Transfer the timer/switches and any brackets to the new panel; move connectors one at a time or photograph wiring for reference.
• Watch for sharp metal edges; avoid overtightening screws; control shafts are centered before reinstalling knobs.

This control panel assembly replaces the white front console on your dryer. It restores a solid mounting surface for the timer, switches, or display so you can select cycles and settings with proper alignment and smooth operation. What it does

• Provides the front console housing for the dryer's user controls
• Keeps buttons/knobs and indicators aligned and protected
• Restores appearance after cracks, discoloration, or broken tabs
• Helpful when controls feel loose, are hard to press, or the console is rattling

• 1 white control panel assembly

• Disconnect power; if gas, shut off the gas supply before servicing
• Remove control knobs and any end caps; take out mounting screws/clips and lift off the old panel
• Transfer any brackets, light pipes, clips, and harness retainers from the old panel to the new as needed
• Reinstall and tighten fasteners; refit knobs and verify smooth control operation before restoring power

This console back cover assembly forms the rear housing of the dryer's control console. It supports the timer/controls and shields wiring so the control panel stays secure, aligned, and protected during everyday use.

• Forms the rear shell of the control console
• Provides mounting points for the timer/control board and switches
• Protects and routes console wiring away from heat and debris
• Helps keep knobs and buttons properly aligned and secured
• Common signs it's needed: cracked plastic, broken tabs, or a loose/rattling console

• Disconnect power to the dryer before servicing
• Remove top/console fasteners per your model's service instructions and support the console
• Transfer controls, brackets, and hardware from the old cover to the new one
• Reattach all retainers/ground screws before reassembly and test

This replacement control panel, also called the backsplash assembly, is the structural console on the rear of the dryer top where the timer and switches mount. It restores secure control mounting and a clean, finished appearance when the original is cracked or damaged.

• Houses and supports the dryer's timer and control switches
• Covers and helps protect console-area wiring from contact
• Aligns control shafts through the panel openings for smooth knob operation
• Common signs of failure: cracked panel, broken mounting tabs, loose or rattling controls

• Disconnect power; for gas models, also shut off the gas supply
• Remove control knobs and mounting screws, then tilt or lift the console to access the panel
• Transfer timer/switches and any brackets from the old panel to the new one, keeping hardware organized
• Do not overtighten screws; verify all controls turn and click freely before restoring power

This is a control panel.

This is a control panel used in many dryers. It is an essential part that includes the touchpad for the appliance. This component sits on top of the dryer and allows the user to operate the machine. It includes buttons for cycles, drying temp, and other options for drying clothing after the use of a washing machine. It's made of durable materials but can be damaged and require replacement. It may also malfunction and stop showing cycle information on the front of the panel. The buttons can also experience issues necessitating replacement. If the control panel is damaged or malfunctioning, the first step to take is making sure the dryer is turned off. This will prevent any injuries or damage from occurring during the replacement process. A set of basic tools and a pair of work gloves will also be useful. The original control panel should be carefully removed from the washer and set to the side.This control panel is sold as a single part. It is an OEM replacement component that is sourced directly from the manufacturer. This part is made for use with several Maytag dryers.

This white backsplash assembly restores the finished rear appearance of a range and helps protect the wall from spills, splatters, and heat. It provides a clean, factory-fit rear cover for affected models. What it does:

• Covers and protects the rear wall area behind the range from grease, food splashes, and light heat exposure
• Restores the appliance's factory appearance when the original backsplash is damaged or missing
• Secures to the range frame to provide a finished mounting surface for rear components on applicable models
• Prevents debris from entering gaps between the appliance and wall

• Disconnect power (and gas, if applicable) before beginning service
• Remove screws or fasteners holding the old backsplash; save hardware for reassembly if reusable
• Handle edges carefully; use proper hand tools and follow the appliance wiring/part diagram

This control console panel replaces the front user interface that houses the range/oven controls and display, restoring a clean, responsive control surface for normal operation and appearance. Ideal when buttons, labels, or the display are damaged. What it does:

• Provides the tactile surface and mounting for the oven/range control switches and display
• Restores readable labels and button feedback for timer, bake, broil and other functions
• Helps resolve symptoms like unresponsive or missing buttons, cracked/warped panel, or cosmetic damage
• Works with the existing control board and internal electronics

• One control console panel

• Disconnect power to the appliance before starting to avoid shock
• Basic disassembly of the upper console is required; keep fasteners and wiring organized
• Inspect the existing control board and connector fit before final reassembly

This control panel assembly replaces the oven's front console that houses the keypad and display, restoring user controls and readable status feedback for the range. It's a direct-fit console component used to operate oven functions. What it does:

• Provides the front-mounted keypad and display interface for setting temperature, timers and oven modes
• Replaces a cracked, unresponsive, or incorrectly displaying console to restore normal controls
• Carries the underlying wiring connections and mounting points for secure installation
• Works with the oven's electronic control board to send user commands

• Disconnect power at the breaker before starting any repair to avoid shock
• Remove oven trim or mounting screws to access and unplug the existing control panel harness
• Handle the display and glass surfaces carefully to avoid damage or fingerprints