Washer Insert Control Panel Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8557301
This is a 60 Hz electromechanical timer that controls the sequence and duration of wash, rinse, and spin cycles in a washing machine. It uses a small motor and a series of internal cams and contacts to advance the machine through each stage of the laundry cycle. Replace this timer if the washer gets stuck on one cycle, skips cycles, won't advance, or fails to start altogether.
Do-It-Yourself Stories from Customers like You
Timer control was not working Cornelio L. • West Covina , CA • April 19, 2014
I searched online and found Appliance Parts Pros to have the best price and an instructional video on how to replace this part. I've never done any type of repairs on a washing machine and figured I would give it a try. My washer is approx. nine years old and in good condition, and either I would repair this on my own or buy another. It took me about 30 min. to remove and replace the part, once this was completed I put the washing machine back into operation. Hurray!!!!!! did not have to spend...
Read more
More
$208.62
- Compare At:
-
$250.34
- You Save:
-
$41.72
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8183196
This motor control board regulates the washer's drive motor, controlling spin speed and direction during wash and spin cycles. It is typically mounted near the bottom of the washer behind the front or rear access panel. Replace this board if the washer won't spin or agitate, stops mid-cycle, or if the motor runs erratically or not at all.
Do-It-Yourself Stories from Customers like You
Machine would not power up (panel would no light up) i did have some error codes displayed before that f 70 was one code Steven P. • West Roxbury , MA • August 19, 2014
After much reading on line regarding my problem. I decided to do any test that I could to try to diagnose and fix this myself if I could. This took a lot of time and patience to get the answers on how to go about this from "experts" as some of the info was contradictory. I was almost about to give up and buy a new washer with less electronic parts and buttons as advised by an honest appliance technician . I tried one more thing first which was to disconnect the lead wires connected to the MCU ....
Read more
More
$277.02
- Compare At:
-
$304.58
- You Save:
-
$27.56
Genuine Whirlpool part
By: Whirlpool
Part Number: W10756692
This motor control board is created for use with washing machines. It's located inside the washing machine, where users can change settings and start or stop the appliance. It is tasked with regulating how quickly the washer spins during a cycle. Wear and tear or damage can cause the motor control board to malfunction. This may make it impossible for the washer to agitate or spin. If this happens, a replacement will need to be made.To replace this part, start by unplugging the appliance. Once the area is safe, the bottom front panel should be removed. This will provide access to the original motor control board. Pull on the motor control board until the wires can be reached. The position of these components should be noted before taking out the part. Replace with a new motor control board and replace the wires.This motor control board is designed to fit washing machines made by Maytag, Whirlpool, Kenmore, and KitchenAid. This is an authentic OEM replacement part that is sourced directly from the manufacturer. It's sold as a single part.
Do-It-Yourself Stories from Customers like You
Whirlpool duet washing machine 7mghw9100mw1 with f06 error code Isaac G. • Mcallen , TX • November 03, 2014
We started getting the F06 code when on the normal cycle it was time to Rinse/Spin, pointing to a speed/tachometer issue on the motor. After several attempts of unplugging from power and restarting the cycle it would eventually start working for the rest of the laundry session. The Whirlpool technician after a brief look on the underside determined it was the motor and had to be replaced, even tough all troubleshooting tests on the motor were ok. I insisted that the probability was much higher...
Read more
More
$277.99
- Compare At:
-
$305.94
- You Save:
-
$27.95
Genuine Whirlpool part
By: Whirlpool
Part Number: W10860464
Fix a washer that won't start, has all lights on, or runs erratically. This electronic control board restores proper cycle control. Moderate difficulty.
Do-It-Yourself Stories from Customers like You
All indicator light show up on electronic main control board and machine won’t start. Thomas H. • Dedham , MA • July 24, 2021
Replace the Mainboard control and push the start button.
Read more
More
$220.25
- Compare At:
-
$242.28
- You Save:
-
$22.03
Genuine Whirlpool part
By: Whirlpool
Part Number: W11135391
Control panel console mounts at top of washer and houses buttons and display. Replace if cracked, unresponsive, or has burn marks on the board backing.
Do-It-Yourself Stories from Customers like You
F5 e1 Daryl B. • Tunkhannock , PA • November 29, 2025
New lid switch
Read more
More
$263.95
- Compare At:
-
$314.10
- You Save:
-
$50.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 131758600
Washer won't advance through cycles or stops mid-cycle? The timer controls wash, rinse, and spin sequences. DIY-friendly repair restores normal operation.
Do-It-Yourself Stories from Customers like You
The washer wouldn't advance to the next cycle Alphonso C. • Axton , VA • January 03, 2017
I replaced the timer
Read more
More
$215.79
- Compare At:
-
$254.63
- You Save:
-
$38.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3953321
Fix a washer that stops mid-cycle or won't advance with this mechanical timer. Controls wash, rinse, and spin sequences. 10-20 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Timer had gone out and lid switch as well William D. • Jamestown , CA • July 18, 2014
After opening the area where the timer was housed, I removed the old timer & replaced it with the new one. The repair was so easy we were back to washing clothes in 10 minutes.
Read more
More
$208.95
- Compare At:
-
$250.74
- You Save:
-
$41.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546685
Fix a washer that won't advance cycles or stops mid-cycle with a new timer control. Common DIY repair taking 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Whirlpool washer timer Shawn C. • Sykesville , MD • May 23, 2014
Watched the video , perfect instructions, part on time, right part , took 10 min to replace
Read more
More
$196.95
- Compare At:
-
$234.37
- You Save:
-
$37.42
Genuine Whirlpool part
By: Whirlpool
Part Number: W11400681
Fix a washer that won't start, stops mid-cycle, or shows error codes with a new electronic control board. This part controls all washer functions.
Do-It-Yourself Stories from Customers like You
Lf fault had replaced the valve and still wasn’t filling so replaced the harness and board that solved the problem Samuel S. • Martinez , CA • June 07, 2026
By replacing more parts
Read more
More
$261.77
- Compare At:
-
$294.04
- You Save:
-
$32.27
Genuine Whirlpool part
By: Whirlpool
Part Number: W11112656
Control panel housing assembly for washing machines. Includes console case, trim, wiring harness, and mounting components. Replaces cracked or damaged panels.
More
$253.57
- Compare At:
-
$346.35
- You Save:
-
$92.78
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001025
Washer won't advance through cycles or skips steps? This timer controls wash, rinse, and spin sequences. Moderate DIY repair restores cycle operation.
Do-It-Yourself Stories from Customers like You
Washing machine would not agitate or spin Cherylann W. • Woburn , MA • January 06, 2015
The washing machine intermittently would not agitate or spin. A reset of the timer dial fixed it. Then nothing fixed it. Originally thought it was the timer but father wanted to check out other possibilities. So he brought his meter over and went through all that he could, including checking power to the motor below. All was good electrical-wise. On the holiday, January 1, a rep. at AppliancePartsPros assured me that if a new timer did not fix the problem, I could return the item, even...
Read more
More
$190.68
- Compare At:
-
$226.91
- You Save:
-
$36.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188755
Rear access cover panel for refrigerators. Shields compressor and electrical components from dust and debris. Replace if cracked, damaged, or worn.
Do-It-Yourself Stories from Customers like You
Changed out the old rear panel on my fridge John S. • Angleton , TX • January 20, 2019
Undid a handful of screws, put the new panel in place and screwed them back in.
Read more
More
$85.95
- Compare At:
-
$101.42
- You Save:
-
$15.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661649
Fix a washer that won't spin, skips cycles, or stops mid-cycle. This timer controls cycle progression and power routing. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Washer would fail to complete spin cycles Robert H. • Alpine , TX • February 14, 2015
I started by replacing the lid switch without the desired result. So I decided to replace the timer unit. It works like a new machine at the moment. At least on the first trial load. More loads will convince me that it is fixed for sure. I cannot be more complimentary about Appliance Parts Pros as I live very remotely in West Texas. The part arrived quickly and it was the exact right part required as ordered. This is my second order and I will return for more parts if I need them.
Read more
More
$179.95
- Compare At:
-
$214.14
- You Save:
-
$34.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10177827
Fix a washer that agitates before filling or adds water after the final spin. This timer controls wash cycle sequences. DIY repair in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Washer machine timer failed would not add water before agitation started Robert B. • Rotonda West , FL • May 16, 2014
Found replacement timer at Appliances Parts Pros. Ordered on a Sunday (as all appliances fail on the weekend) and with expedited shipping got the part on Tuesday morning. Video from Appliance Parts was very helpful and entire replacement took less than 15 minutes. I also purchased a timer for a dryer earlier and had the same positive experience.
Read more
More
$227.29
- Compare At:
-
$270.48
- You Save:
-
$43.19
Genuine Ge part
By: Ge
Part Number: WH44X20021
The Lid Assembly is an OEM part for GE washing machines. This part is the lid of the washer. It is essential for securely covering the washer drum, preventing water from splashing out during the wash cycle, and allowing safe operation by ensuring the washer does not run with the lid open.
Causes of a bad lid assembly can include general wear and tear, physical damage from heavy loads or impacts, or issues with the hinges or latch mechanisms.
Symptoms of a bad lid assembly include:
- Difficulty in opening or closing the lid
- Washer not starting or stopping mid-cycle due to a faulty lid switch
- Visible cracks or damage on the lid
- Water leaking from the top of the washer
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Badly rusted lid and top cover: ge model s5100d0ww George W. • Louisville , KY • September 30, 2014
Removing and Replacing (R&R) the parts took about 15 minutes. Getting the correct parts took several weeks. It was a severe struggle.
Many of you will experience problems trying to get the correct "Lid" for similar GE washing machine models. AppliancePartsPros.com was great: Right price, Arrived quickly in good condition. I got the wrong part. It was not the fault of AppliancePartsPros.com, though. To make a long story short, GE has disseminated incorrect data in parts lists and it...
Read more
More
$74.95
- Compare At:
-
$88.44
- You Save:
-
$13.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10192966
This is the main electronic control board that manages the washer's cycles, motor operation, water levels, and other key functions. It receives input from the user interface and sends signals to the various components to run each wash cycle properly. Replace this board if the washer fails to start, stops mid-cycle, displays error codes, or exhibits erratic behavior that is not caused by a faulty sensor or wiring issue.
More
$389.47
- Compare At:
-
$459.57
- You Save:
-
$70.10