Whirlpool Gi6sarxxf05 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10882923
The Ice Maker is an OEM replacement part for Whirlpool refrigerators. It is responsible for producing ice cubes to fill the ice bucket in the freezer. The ice maker utilizes water from the refrigerator's internal supply line and electricity to slowly freeze water into individual ice cubes.
Causes of a bad ice maker can include worn components that affect its ability to properly freeze water, malfunctions in the electronic control board that regulate the process, or issues with the supply line.
Symptoms of a bad ice maker include:
- Failure to produce ice cubes
- Incorrect sized or shaped ice
- Excessive noise during operation
- Water in the freezer
This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
NOTE: 8 cube icemaker Includes two wire harnesses and shut off arm.
Do-It-Yourself Stories from Customers like You
Ice maker stopped working in mid cycle after filter change. Stephen L. • Kawkawlin , MI • December 29, 2021
After researching a number of sites for a diagnosis I tended to think the culprit was going to be the ice maker thermostat. Checking pricing and availability of the thermostat prices were very close at $40 BUT wait now you have to but the thermo mastic at another $35-$40. And after some continued research the factory ice maker in a $3000 msrp 4 door refrigerator was/is known to be defective long after warranty period expires. So it only made intelligent sense to buy the entire icemaker at a...
Read more
More
$122.35
- Compare At:
-
$146.82
- You Save:
-
$24.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10662129
The Run Capacitor is an OEM part for Whirlpool appliances, designed to provide the necessary electrical charge to start and run the compressor motor. This part attaches to the compressor to aids in maintaining a consistent motor speed and ensuring smooth operation. The run capacitor plays a crucial role in the appliance's electrical system, storing and releasing energy as needed to power the motor.
Causes of a bad Run Capacitor include electrical surges, wear and tear over time, or overheating, which can lead to a failure in providing the necessary start-up energy or maintaining motor speed.
Symptoms of a bad Run Capacitor include:
- The appliance does not start.
- The motor shuts off shortly after starting.
- The appliance is humming but not running.
- Increased energy consumption.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Clicking sound
-
Won't start
-
Freezer section too warm
See more...
Do-It-Yourself Stories from Customers like You
Both the freezer and refrigerator stopped cooling Raymond O. • Kerrville , TX • April 11, 2015
I have a Kitchen Aid side by side refrigerator/freezer which is 8 years old. One day it just stopped cooling. At first I was just going to junk it and purchase a new one. However, I took off the lower back cover and noticed the compressor was not running. I knew from experience that these compressors need a starter capacitor and relay and it is not uncommon for these parts to fail. I looked on the Internet for a video which showed how to remove the parts. I also found a video which showed how...
Read more
More
$42.95
- Compare At:
-
$50.68
- You Save:
-
$7.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10326469
The Center Rail is an OEM part compatible with Whirlpool refrigerators. It plays a crucial role in providing structural support and stability for the shelves and drawers within the refrigerator compartment. This rail measures approximately 14.1 x 2.6 x 1.5 inches.
Causes of a bad refrigerator center rail can include physical damage from impact or excessive force, warping due to temperature fluctuations or moisture over time, or general wear and tear from repeated use.
Symptoms of a bad center rail include:
- Shelves or drawers becoming misaligned or difficult to slide in and out
- Excessive wobbling or instability when shelves or drawers are loaded
- Visible signs of damage, such as cracks or bends, on the center rail itself
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken main crisper drawer frame and center rail Rick N. • Richland , WA • August 29, 2015
No instructions are included with either piece, which makes installation take more time and care.
Tools needed: Small standard flat blade screwdriver, box knife or other knife with at least a 2" long blade, super glue.
Remove the old main crisper frame:
1. Remove old main frame by lifting upward and outward.
2. Remove the center rail from the frame. May require bending of the main frame to remove
it.
3. Remove the crisper front panel by unsnapping from frame. This is easily done by...
Read more
More
$23.95
- Compare At:
-
$28.50
- You Save:
-
$4.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W10619951
The Refrigerator Drain Tube is an OEM replacement part for Whirlpool refrigerators. It is the tube responsible for draining condensation and any other moisture that collects at the back of the refrigerator compartment. The drain tube guides liquid to the evaporation pan located below the refrigerator to be evaporated.
Symptoms of a bad drain tube include:
- Water collecting in the back of the refrigerator
- Musty odors emanating from the refrigerator
- Water leakage from the bottom of the refrigerator
Causes of a bad drain tube can be blockages from food particles or debris, cracks or leaks that prevent proper drainage, or damage due to impact or kinking of the tube over time.
This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Fridge leaked every 2 3 days. Mark D. • Cumberland , RI • October 19, 2019
The drain tube for for the defrost cycle seemed to be blocked, so I googled the repair & it sent me to AppliancePartsPros. Obviously, there's a design problem with this model since many other people have the same issue. This tube is an upgrade on the original for my KitchenAid model (design flaw). Since installation 4 days ago, I have had no leaks - awesome!
The video for installation of the new tube on AppliancePartsPros was excellent. Two additions to the video:
1) I used a hair dryer...
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Whirlpool part
By: Whirlpool
Part Number: EDR4RXD1
The Water Filter is an OEM part for Whirlpool refrigerators. It is designed to filter and purify the water for your refrigerator, ensuring clean and fresh drinking water and ice.
A bad refrigerator water filter can be caused by regular use and the buildup of contaminants over time. It may also become less effective if not replaced according to the manufacturer's recommended schedule.
Symptoms of a bad refrigerator water filter include:
- A decrease in water flow or water pressure.
- An unpleasant taste or odor in the water.
- The presence of particles or sediment in the water.
- Cloudy or discolored ice cubes.
If you notice any of these signs or if it has been more than six months since your last filter replacement, it's time to replace the refrigerator water filter with this genuine OEM part. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker dispenses too little ice
-
Ice maker won't dispense ice
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken water valve Terry H. • Brighton , CO • March 24, 2014
Ordered part and replaced it
Read more
More
$83.95
- Compare At:
-
$100.74
- You Save:
-
$16.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10212139
The Cantilever Bin is an OEM part for Whirlpool refrigerators. It attaches to the inner door panel, providing adjustable and accessible storage for various items like condiments, jars, and drinks. This bin measures approximately 14 by 4-1/4 by 3-3/8 inches
Causes of a bad Cantilever Bin can include cracking due to overloading or impact, wear and tear from regular use, and damage from harsh cleaning chemicals that can weaken the plastic. It's also possible for the mounting hooks to break, which would prevent the bin from securely attaching to the refrigerator door.
Symptoms of a bad Cantilever Bin include:
- Difficulty in securing the bin to the door
- Visible cracks or stress marks in the plastic
- Sagging or leaning when the bin is loaded
- The bin detaching from the door unexpectedly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken drawer Dale E E. • Greenville , CA • July 13, 2015
Replaced it with a new drawer
Read more
More
$58.47
- Compare At:
-
$70.16
- You Save:
-
$11.69
Genuine Whirlpool part
By: Whirlpool
Part Number: W11396033
The Door Switch is an OEM part for Whirlpool refrigerators. This switch is crucial for controlling the interior lights and the activation of certain refrigerator functions when the door is opened or closed.
Symptoms of a failing Door Switch include:
- Interior lights staying on when the refrigerator door is closed
- Interior lights not turning on when the door is opened
- The refrigerator unexpectedly starting or stopping
- Alarms or indicators malfunctioning, signaling an open door when it is closed
Causes of a bad door switch can involve mechanical failure due to wear and tear from frequent use, damage from impacts (such as slamming the door), or electrical issues like a short circuit or faulty wiring.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Light switch on bottom freezer compartment flakey (intermittant) Alfred M. • Pahoa , HI • September 07, 2014
I watched the video on replacing the switch on a side freezer where prying out to original switch did not look difficult. I then got on the floor and tried to pry out my switch. Had a terrible time (locking tab or switch body hardened with time?) and mangled the switch terribly and the upper panel of the freezer somewhat, but the switch did come out. AND THEN the top freezer panel with the switch and light assembly fell out into my hands! I was able to unplug one Molex connector and the...
Read more
More
$29.30
- Compare At:
-
$34.87
- You Save:
-
$5.57
Genuine Whirlpool part
By: Whirlpool
Part Number: W10830055
The Door Gasket is an OEM part for Whirlpool refrigerators. It forms a tight seal around the refrigerator door, preventing warm air from entering and cold air from escaping, thus maintaining the optimal internal temperature.
Over time, the door gasket can wear out or become damaged, leading to leaks that compromise the refrigerator's efficiency. Causes of a bad door gasket include normal wear and tear, frequent door openings, exposure to extreme temperatures, or physical damage such as cuts or tears.
Symptoms of a bad door gasket include:
- Condensation or frost buildup inside the refrigerator
- Increased energy consumption
- Warm spots inside the refrigerator
- The door not closing properly or sealing tightly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad gasket / melted tray (my fault dishwasher) Donald T. • Stewartstown , PA • August 09, 2016
The tray was simple, pick up the old one, pop in the new one.
The gasket for my refrigerator was almost as easy. When I received the part I opened it up and let it lay flat for about 3 days (probably overkill). The old gasket popped right out and the new one went in really easy. The entire job took me about 10 minutes to do, no tools required. I do recommend that you start with corners and work your way to the middle of each side. I found that would prevent any stretching. You also need to...
Read more
More
$134.26
- Compare At:
-
$161.11
- You Save:
-
$26.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10714545
The Freezer Door Gasket is an OEM part for Whirlpool refrigerators. It provides a secure seal around the freezer door, helping to maintain the internal temperature and ensure efficient operation by preventing warm air from entering the freezer compartment.
You should replace the freezer door gasket if it becomes worn out, torn, or damaged. Causes of a bad door gasket can include general wear and tear, frequent opening and closing of the freezer door, or exposure to extreme temperatures.
Symptoms of a bad freezer door gasket include:
- Frost buildup inside the freezer
- The freezer not maintaining a consistent temperature
- Increased energy consumption
- The freezer door not closing properly or sealing tightly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Accumulation of rime ice in freezer on french door refrigerator Raniel S. • Cary , NC • May 13, 2016
Did some online research and everything pointed to the fact that moisture was getting into the freezer and therefore the seal was not doing it's job. I ran my finger along the seal and sure enough I detected cold air coming out of one corner of the seal. I ordered the appropriate part from Appliance Parts Pros (APP) but decided to test my diagnosis by installing thin weather stripping in the affected area. I checked the freezer the next day and saw no accumulation of any more Rime ice so...
Read more
More
$132.72
- Compare At:
-
$157.94
- You Save:
-
$25.22
Genuine Whirlpool part
By: Whirlpool
Part Number: W11415785
The Icemaker Fill Tube is an OEM part for Whirlpool refrigerators. This fill tube directs water from the water supply line to the icemaker, ensuring a consistent flow for ice production. It is crucial for maintaining the efficiency and functionality of the icemaker.
Causes of a bad icemaker fill tube can include clogs from mineral deposits, freezing of the tube, or damage from regular wear and tear. A malfunctioning fill tube can disrupt the water flow, leading to issues with ice production.
Symptoms of a bad icemaker fill tube include:
- No ice being produced
- Reduced ice output
- Water leaks near the icemaker
- Visible cracks or clogs in the tube
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The tube w/waterline fill to my ice maker busted Roger B. • Waldorf , MD • June 06, 2014
I ordered the part from ApplianceParts Pro.com and could not believe how fast the part arrived. It arrived by FedX the very next day after I placed the order. The repair suggestions that was given on your web site was right on. The repair was so simple. I was thinking that I was going to disassemble the ice maker to access the connections but with the very simple guidance you provided, the repair took maybe a total of 20 minutes from start to finish. Awsome!!!
Read more
More
$50.31
- Compare At:
-
$59.37
- You Save:
-
$9.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10224961
The Door Bin is an OEM part for Whirlpool refrigerators. It attaches to the inside of the refrigerator door, offering convenient storage for condiments, bottles, and other items, maximizing space and keeping your refrigerator organized. This bin is designed to be easily removable for cleaning and adjusting storage needs. The bin measures about 16 inches wide by 6 inches high by 8 inches deep.
Symptoms of a failing door bin include:
- Cracks or breaks in the plastic.
- The bin becoming loose or unable to properly attach to the door.
- Sagging or bending under weight, indicating a loss of structural integrity.
Common causes of damage to the door bin often include overloading with heavy items, frequent removal and reattachment, or impacts during cleaning. Replacing a damaged or broken bin is essential for maintaining the functionality and appearance of your refrigerator's interior.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Just replacing a few parts Tina K. • Collins , NY • August 06, 2020
I was able to easily replace the Left slide for the drawer as well as 2 of the bins on the right door. The “chat” person was incredibly helpful in assisting me to get the correct parts.
Read more
More
$63.59
- Compare At:
-
$75.67
- You Save:
-
$12.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627985
The Icemaker Cycling Thermostat is an OEM part for Whirlpool refrigerators. This thermostat plays a crucial role in the icemaker's operation by monitoring the temperature in the icemaker and ensuring it is at the appropriate level for proper ice production. It reads the temperature to determine when the icemaker should cycle on and off.
Causes of a bad icemaker cycling thermostat can include electrical malfunctions, temperature sensor issues, or wear and tear.
Symptoms of a bad icemaker cycling thermostat may include:
- Inconsistent ice production.
- The icemaker not cycling properly.
- The icemaker not dumping the ice into the ice bin.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Ice maker wouldnt make ice Ty G. • Lewis Center , OH • December 30, 2014
I used your online troubleshooting tips and watched the videos on your site. I determined my thermostat was defective, ordered the thermostat which arrived in two days and I replaced the thermostat and I now have a full bin of ice !!!
The do it yourself video was extremely helpful and made the repair very easy.
Thanks so much for the great service and quick delivery !!!
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10498990
The Water Inlet Valve is an OEM part for Whirlpool dishwashers. It is responsible for controlling the flow of water into the dishwasher during the fill cycles. This valve ensures that the dishwasher receives the correct amount of water needed for washing and rinsing dishes effectively.
You should replace the water inlet valve if it becomes faulty. Causes of a bad water inlet valve can include wear and tear from regular use, mineral buildup from hard water, or electrical issues. A malfunctioning valve can lead to improper water flow, affecting the dishwasher’s performance and potentially causing water leaks.
Symptoms of a bad water inlet valve include:
- The dishwasher not filling with water or filling slowly
- Water leaking from the valve area
- Dishes not being cleaned properly due to insufficient water
- The dishwasher making unusual noises during the fill cycle
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
No ice being made water dispenser worked fine Ken M. • Collierville , TN • June 26, 2015
Replaced water valve in about 10 minutes, 5 of which were pulling the frige out and gathering the tools. Now I have ice.
Read more
More
$101.30
- Compare At:
-
$119.53
- You Save:
-
$18.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003405
The Refrigerator Pivot Block is an OEM part for Whirlpool refrigerators. It supports the door hinge, allowing the refrigerator door to open and close smoothly. The pivot block ensures that the door stays aligned and securely attached to the refrigerator frame.
Causes of a bad pivot block can include wear and tear over time, heavy use, or damage from accidental impacts. Misalignment or excessive force when opening and closing the door can also contribute to its failure.
Symptoms of a bad refrigerator pivot block include:
- The refrigerator door not opening or closing properly
- A misaligned door that doesn't seal correctly
- Unusual noises when the door is operated
- The door feeling loose or wobbly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Buttons on control panel did not work some parts missing Suzan F. • Lexington , NC • November 17, 2015
We turned off the circuit breaker. We then removed the light cover and then the control panel. We disconnected the Keyboard, Utah, plugged in the new one and turned the breaker on to see if everything worked. We realized that we did not need a new jazz board so that is being returned. The old Keyboard was removed, the new one attached and all the parts were put back. The frig works fine now at the recommended settings of zero and 38F.
Read more
More
$10.43
- Compare At:
-
$12.52
- You Save:
-
$2.09
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10196393
The Damper Control Assembly is an OEM part for Whirlpool refrigerators. This component regulates the flow of cold air from the freezer compartment to the refrigerator compartment, ensuring consistent and optimal temperatures throughout the appliance. It plays a critical role in maintaining the balance between freezer and refrigerator temperatures.
Common causes of a bad damper control assembly include electrical malfunctions, physical damage to the damper, or wear and tear from regular use. Over time, the motor or the damper flap can fail, leading to improper air regulation.
Symptoms of a bad damper control assembly include:
- Inconsistent temperatures between the freezer and refrigerator compartments
- The refrigerator being too warm or too cold
- Frost buildup in the refrigerator compartment
- The damper making unusual noises or not moving as it should
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Loud noise on circulation fan starting up; noise was in refer not freezer Robert S. • Saint James City , FL • January 26, 2015
I determined that the motor that drives the damper valve that allows cold air into the refer was noisy. I ordered the replacement part from AppliancePartsPro.com. It arrived within 3 days and I changed the units out, which took about 10 minutes total. All is quiet with the refer now.
Read more
More
$101.26
- Compare At:
-
$120.50
- You Save:
-
$19.24
Genuine Whirlpool part
By: Whirlpool
Part Number: W11185686
The Ice Container Assembly is an OEM component for Whirlpool refrigerators. It is the bin that collects and stores ice produced by the ice maker. With its precise design and durable construction, the ice container allows ice cubes to easily drop down through the chute from the ice maker.
Causes of a bad ice container assembly can include cracks or broken parts that prevent proper operation. Over many uses, normal wear and tear may compromise its ability to effectively store and retain ice.
Symptoms of a bad ice container assembly include:
- Ice cubes dropping outside of the container and accumulating elsewhere
- Difficulty removing cubes from the container
- Cracks or openings that compromise insulation and cause premature melting
This replacement is also compatible with Kenmore, KitchenAid, and select Maytag models.
Do-It-Yourself Stories from Customers like You
Cracked ice container Robert B. • Mechanicsville , VA • August 20, 2016
Ordered part and replace it
Read more
More
$199.95
- Compare At:
-
$237.94
- You Save:
-
$37.99