Ade 7000Ayw Parts

The Retaining Ring is an OEM replacement part for Whirlpool dryers and washing machines. This retaining ring holds the rear wheels on the axels of the washer or dryer. 

Symptoms of a bad retaining ring can include wear and tear over time, damage due to accident or impact, or corrosion affecting the structural integrity.

Causes of a bad retaining ring dryer include:

• Excessive vibration or movement of the drum during operation 
• Noise or banging sounds from loose components   
• Deformation or cracking of the retaining ring itself
• The dryer door not closing properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Glide Kit is an OEM replacement part for Speed Queen dryers. Designed for models manufactured in 1992 and later, this kit ensures the drum rotates smoothly during operation. It includes glide components that reduce friction between the drum and the dryer frame, allowing efficient and quiet performance.

Symptoms of a bad Glide Kit include:

• Squeaking or grinding noises during dryer operation
• Visible wear or damage to the glides upon inspection
• The drum becoming difficult to turn or feeling misaligned

Causes of a failing Glide Kit can include natural wear and tear over extended use, overloading the dryer, or improper alignment of the drum, which increases stress on the glides.

This OEM Speed Queen part is also compatible with Alliance laundry equipment.

The Drum Roller Axle is an OEM replacement part for Whirlpool dryers. It is the component that attaches to the rear panel and supports the dryer drum rollers.

Causes of a bad drum roller axle can include wear from years of operation, potentially leading to bending or wobbling that disturbs smooth drum spinning. Bearing seals may also deteriorate through continuous motion and heat exposure.

Symptoms of a bad Drum Roller Axle include:

• Vibrations or imbalanced drum rotations sensed during drying
• Premature failure of other drum or suspension components
• Reduced efficiency as uneven tumbling hinders fabric agitation
• Noises and rattling sounds from within the dryer cylinder area

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, and select Kenmore models

The Thermistor Assembly is an OEM part for Speed Queen dryers. This part monitors and regulates the temperature inside the dryer by providing temperature readings to the control board, ensuring that the dryer operates at the correct temperature settings for optimal drying performance.

Common causes of a bad thermistor include wear and tear over time, exposure to extreme temperatures, or electrical issues that can cause the sensor to fail.

Symptoms of a bad Thermistor Assembly include:

• The dryer not heating properly or overheating
• Inconsistent drying times or incomplete drying cycles
• Error codes related to temperature sensing
• The dryer shutting off unexpectedly

The Idler Lever Assembly with Bearing and Wheel is an OEM replacement part for Speed Queen dryers. This assembly maintains tension on the dryer belt, ensuring it rotates the drum effectively during operation. It includes the idler lever, bearings, and wheel, which work together to support smooth and efficient drum movement.

Over time, the idler assembly can wear out due to friction, heavy use, or lack of lubrication. Bearings may seize, or the wheel can become damaged, leading to reduced tension and compromised dryer performance.

Symptoms of a bad idler lever assembly include:

• Squeaking or grinding noises during operation
• Drum not turning or turning inconsistently
• Dryer belt slipping or breaking prematurely
• Increased drying times or inefficient operation

This OEM Speed Queen part is designed to restore reliable performance in compatible dryer models.

This is a control knob for washing machines. This control knob is used to adjust the water temperature and level settings on the unit. It is manufactured out of a white plastic. The replacement is very easy and takes less than 15 minutes to complete. All that this process involves is pulling the old knob off and sliding the new knob on.A new control knob will be needed if the original is cracked, broken, or damaged in any way. Over time, the white plastic may begin to yellow, and the user may wish to replace the control knob for cosmetic purposes. If the knob is not actuating the desired cycle, it will need to be replaced.This control knob is a genuine SpeedQueen part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific control knob is compatible with washing machines that are manufactured by the SpeedQueen brand.

The  Dryer Timer is an OEM component specially designed for Speed Queen brand clothes dryers. This timer controls the various timed cycles - normal, delicate, fluff - as well as the automatic dryness sensor if equipped. 

Causes of a bad timer can include malfunctions due to repeated activations over time, moisture exposure damaging electronic components, or improper voltage input.

Symptoms of a bad timer include:

• Inability to select or start any drying cycle  
• Constantly running or failing to shut off automatically
• Unresponsive touch/knob controls
• Error codes or flashing lights related to timer operation

This timer is also compatible with select Asko and Crosley dryers.

This is the drive motor that powers your washer's drive system. It turns the basket for wash and spin, restoring smooth, reliable operation when the original motor is weak, noisy, or fails to start. What it does and common symptoms:

• Provides the torque needed to rotate the basket during wash and spin cycles
• Symptoms of a failing motor include: no agitate, no spin, or cycle stalling
• Can trigger motor/drive-related error indications on some models

• 1 drive motor

• Disconnect power and turn off water supply before servicing
• Access the motor per your model's service procedure; label and transfer connectors one at a time
• Ensure the drive system turns freely by hand; correct any binding in related components before powering on
• After installation, run a diagnostic or spin test to verify operation

The Drum Glide Bracket is an OEM replacement part for Whirlpool dryers. This bracket serves to securely support the rotating drum assembly within the dryer cabinet while allowing it free movement during operation. 

Symptoms of a bad drum glide bracket include:

• Excessive vibration or noise from the drum area
• Difficulty turning or spinning of the drum 
• Scratching or damage to the dryer cabinet walls caused by drum contact
• Misalignment of the drum which can affect drying performance

Causes of a bad bracket can be extensive use over time which leads to wear of the mounting points, or accidental damage from overloading or abuse.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This door catch assembly secures the door when closed so the machine can run. A worn or broken catch can keep the door from latching firmly, causing start issues or interruptions during a cycle.

• Engages with the door strike/latch to hold the door shut
• If worn or damaged, the door may not close or stay closed
• Can lead to the unit not starting or stopping mid-cycle when the door moves
• Helps restore proper door latching and safety interlock function

• Unplug the appliance before service
• Open the door and remove fasteners retaining the old catch
• Transfer orientation from the original part to the new catch
• Test door closure and operation before returning to service

Restore consistent heat with this 5350-watt dryer heater assembly. Replacing a failed element brings back proper drying temperatures so loads finish on time, using the OEM orange-coded configuration specified for select machines.

• Heats the air in electric drying cycles by energizing the element inside the heater housing
• Common fix for no heat, very long dry times, or lukewarm exhaust air
• Replaces a broken/open heating coil; visible breaks or no continuity indicate failure
• Orange-coded assembly matches the specific OEM configuration—verify against your original or IPL

• Disconnect power and allow the appliance to cool before servicing
• Note wire positions; transfer any thermostats/limit devices from the old assembly if your model uses separate components
• Handle by the frame—avoid touching or deforming the bare heating coil
• After installation, clean lint passages and verify proper vent airflow to prevent premature element failure

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

(Adhesive Sold Separately).To order adhesive use part number WPY055980.This Part Can Be Used As Both The Front And Rear Seal In Some Models

The Screw is an OEM replacement part for Whirlpool appliances. The precise threads allow screws to join or assemble other parts securely. 

Causes of a bad screw can include stripping, cracking, or loss of threads due to repeated installation/removal over time. Corrosion is also possible depending on environmental conditions.

Symptoms of a bad screw include: 

• Loosened or detached components that were once fastened 
• Reduced structural integrity of connections or assemblies
• Potential safety hazards if critical parts become dislodged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Cycling Thermostat is an OEM part for SpeedQueen dryers. It regulates the temperature inside the dryer during the drying cycle, ensuring clothes are dried evenly and efficiently. By maintaining the appropriate temperature, the cycling thermostat helps prevent overheating and potential damage to both the dryer and the clothes.

Causes of a bad cycling thermostat can include wear and tear over time, electrical issues, or damage from power surges. Exposure to lint buildup or moisture can also affect its performance, leading to malfunction.

Symptoms of a bad cycling thermostat include:

• Inconsistent drying times
• Clothes not drying completely
• The dryer overheating
• The dryer not heating at all

This OEM SpeedQueen part ensures compatibility and optimal performance, helping maintain the efficiency and safety of your dryer.

The Roller Cylinder is an OEM replacement part for Speed Queen dryers. This component supports the dryer drum and enables smooth rotation during operation, reducing friction and ensuring consistent performance. Proper functioning of the roller cylinder is essential for maintaining the balance and efficiency of the dryer drum.

Causes of a bad Roller Cylinder can include natural wear over time, exposure to heavy loads that strain the rollers, or debris accumulation that affects smooth movement. Misalignment of the drum or poor maintenance practices can also contribute to roller failure.

Symptoms of a bad Roller Cylinder include:

• A thumping or rumbling noise during operation
• The drum wobbling or not spinning smoothly
• Visible wear or damage to the roller upon inspection

This OEM Speed Queen part is also compatible with Alliance laundry equipment.