Amana Lw3303w Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Thrust Washer

4.7 (38)

By: Whirlpool

Part Number: WP233520

The Thrust Washer is an OEM part for Whirlpool washers and dryers, reduces friction between moving parts within the appliance. This small component is placed between rotating surfaces to ensure smooth operation and to extend the lifespan of those parts. The thrust washer can wear down or become damaged due to the constant pressure and movement.

Causes for replacement may include normal wear and tear, overloading the appliance, which puts extra stress on mechanical components, or a lack of regular maintenance.

Symptoms of a bad Thrust Washer include:

Increased noise during operation
The appliance vibrating more than usual
A decrease in performance efficiency

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not agitate
Pumps but will not spin
Will not tumble
Noisy

Do-It-Yourself Stories from Customers like You The issue was a 10+year old Maytag washer wouldn't spin nor would the agitator move but the motor would run. Wessley R. • Trinity , AL • July 28, 2020

Upon removal of the lower inspection panel on the front of the machine, my 20 year old son thought the motor was bad by the smell. But he did discover what turned out to be the belt tensioner pulley laying inside the machine. After he pronounced it dead, without a thought to the idler pulley, I looked at the machine and determined the lack of movement was due to the idler pulley having "fallen" off the shaft by looking at the illustrated parts break down provided on this website. Ordered the... Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Hose Clamp

4.9 (17)

By: Whirlpool

Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

Water leaks around the hose connection points
The hose slipping off the fitting
Visible rust or wear on the clamp
Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

$9.95

Compare At:: $11.74
You Save:: $1.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Retaining Ring

5.0 (30)

By: Whirlpool

Part Number: WP23748

The Retaining Ring is an OEM replacement part for Whirlpool dryers and washing machines. This retaining ring holds the rear wheels on the axels of the washer or dryer.

Symptoms of a bad retaining ring can include wear and tear over time, damage due to accident or impact, or corrosion affecting the structural integrity.

Causes of a bad retaining ring dryer include:

Excessive vibration or movement of the drum during operation
Noise or banging sounds from loose components
Deformation or cracking of the retaining ring itself
The dryer door not closing properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not tumble
Will not agitate
Pumps but will not spin

$12.49

Compare At:: $14.99
You Save:: $2.50

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.6 (7)

By: Whirlpool

Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

Loose or wobbly components within the appliance
Panels or parts that are not securely attached
Rattling or unusual noises due to loose parts
Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

$7.95

Compare At:: $9.46
You Save:: $1.51

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Lid Screw

5.0 (53)

By: Whirlpool

Part Number: WPW10119828

The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.

Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.

Symptoms of a bad washer lid screw include:

The washer lid feeling loose or wobbling
Difficulty in opening or closing the lid
Visible rust or corrosion on the screw
The lid not staying securely in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool cabrio washer cracked lid (model wtw7800xw2) Mike M. • West Hartford , CT • November 29, 2016

I just replaced the glass lid and broken plastic frame with the all metal one. Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016): 1 lid part number WP8572026 (AP6013408) for $119.81 2 hinges WP8563964 (AP6004844) for $6.17 each 4 screws WPW10119828 (AP6015313) for $1.97 each Total $140.03 plus $8.95 shipping, grand total $148.98 Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The... Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw, 1 Piece

4.6 (13)

By: Whirlpool

Part Number: WPY014874

This factory fastener secures appliance components such as panels, brackets, and trim. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and helps keep assemblies aligned for reliable performance.

Fastens appliance parts to maintain structural integrity and alignment
Helps address symptoms like loose or vibrating panels, gaps, or hardware that won't stay tight
Replaces lost, damaged, or corroded fasteners during repairs or reassembly
OEM-matched thread and fit for the specified location

What's included: 1 screw Install notes:

Disconnect power; shut off gas or water supplies before servicing
Replace one screw at a time to preserve alignment of parts
Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
Use the correct driver size/type specified for your model

Do-It-Yourself Stories from Customers like You Loud squealing noise William B. • Rocky Mount , NC • December 17, 2018

First replaced the drum rollers...that wasn't it..took dryer back apart and spun the belt tension wheel by hand (should have done this the first time I took the dryer apart) and it squeaked. so I ordered the full parts: wheel, idler arm, idler spring, arm sleeve, E ring..Put it back together and whoa..no more squealing!! Read more

$5.95

Compare At:: $7.14
You Save:: $1.19

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Fill Hose

4.8 (15)

By: Whirlpool

Part Number: WP89503

Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.

Do-It-Yourself Stories from Customers like You Low water flow and fabric softener would dispense immediately when cycle started Bob G. • Sylacauga , AL • January 19, 2019

Replaced flow meter and control valve Read more

$16.59

Compare At:: $19.58
You Save:: $2.99

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.8 (4)

By: Whirlpool

Part Number: WP3390631

10 - 16 x 1/2

Do-It-Yourself Stories from Customers like You Agitator wasnt sloshing Paige B. • Clarksville , TN • January 30, 2015

I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Spring Fastener (Retaining Clip)

5.0 (6)

By: Whirlpool

Part Number: WP22001650

This spring fastener applies constant tension to hold a component securely in place inside your appliance, helping prevent looseness, vibration, or gaps. Replacing a fatigued or missing clip restores a tight, reliable fit.

Provides spring tension to clamp and retain a part, seal, or panel
Helps maintain alignment and reduce vibration or rattling
Restores secure attachment when the original clip is bent, stretched, or missing
Symptoms can include a part not staying put, visible looseness, or a clip that's damaged or gone

What's included: 1 spring fastener Install notes:

Disconnect power; turn off water supply if applicable
Use needle-nose pliers or a suitable spring tool; wear gloves and eye protection
Note the original orientation before removal to ensure proper reinstallation
Make sure the mating part or seal is fully seated and the fastener is fully engaged before reassembly

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Drum guides had worn out Robert S. • North Apollo , PA • October 08, 2014

Replaced them. Read more

$10.43

Compare At:: $12.52
You Save:: $2.09

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Main Bearing Assembly (Washer)

4.3 (7)

By: Whirlpool

Part Number: WP40004201P

This replacement main bearing assembly supports the washer's drive/spin system. It keeps the inner basket and drive shaft rotating smoothly and quietly, helping maintain alignment and reducing vibration during wash and high-speed spin.

Supports and centers the spin basket/drive shaft for low-friction rotation
Helps reduce noise and vibration when spinning at high RPMs
Restores smooth operation when the original bearing is worn or rough
Common symptoms: roaring/grinding during spin, basket wobble/play, roughness turning by hand, possible leak at rear center if related seal wear is present

What's included: 1 main bearing assembly Install notes:

Disconnect power and water before service; allow the appliance to cool
Access and replacement procedures vary by model; significant disassembly is typical
A bearing press/driver may be required; inspect shaft and related seals and replace if worn
After reassembly, run a test spin to check for leaks

Do-It-Yourself Stories from Customers like You Noisy washer due to bad main bearing assembly caused by water leak of the tub Sotirios P. • Placentia , CA • October 16, 2014

I decided to repair my Amana LWA50AW top loader washer because it has served us well, it is made by Speed Queen and an equal replacement is expensive. These are very dependable washers. The parts I ordered were: part #R9900552 (hub and seal kit) This kit does not include the Tub or Main bearing!!! Nor the drive belt!!! The main bearing is what is attacked by the water due to leaks and makes a jet engine sound as the tub spins faster and faster. Any way, the kit should be updated to include... Read more

$58.95

Compare At:: $70.74
You Save:: $11.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Adjustable Leg

5.0 (5)

By: Whirlpool

Part Number: 22003428

Leg, adjustable (w/nut)

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You Needed new support adjustable legs for my maytag washer Rodger M. • San Clemente , CA • November 17, 2014

Took off the old parts and replaced with the new parts Read more

$14.95

Compare At:: $17.94
You Save:: $2.99

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Drive Belt (Agitate & Spin)

4.8 (17)

By: Whirlpool

Part Number: WP28808

This agitate & spin drive belt transfers motor power to the washer's transmission and spin mechanism. Replacing a worn belt restores proper agitation and spin performance and helps prevent slipping noise or burning-rubber smells.

Links the drive motor to the main pulleys to power both agitation and spin
Replaces a broken, stretched, or glazed belt that slips under load
Common symptoms: no spin or no agitation, weak/slow spin, squealing, burning-rubber odor, visible cracks or fraying
Helps ensure smooth, consistent tub movement and complete cycles

What's included: 1 drive belt Install notes:

Disconnect power and water; wear cut-resistant gloves
Access the belt from the bottom or rear, per your model's service procedure
Release belt tension (motor carriage/idler), remove the old belt, and route the new belt around the motor and drive pulleys as shown on the unit
Rotate by hand before restoring power and running a test cycle

Note: Many belt-drive washers also use a separate pump belt; this part is the drive belt for agitation and spin.

This part fixes the following symptoms

Burning smell
Will not drain
Pumps but will not spin

Do-It-Yourself Stories from Customers like You Loud noise Darrell H. • Largo , MD • December 19, 2014

First i had to remove the belt from the drum pulley. i had to actually remove the motor from the washing machine. carefully remove the two water hoses attached to the pump...have a towel ready...there will be a few cups of water left in the hoses. remove spring from tension pulley then remove the pump that was attached to the motor. you will need a set of hex keys to remove the pump. then you can remove the belt from the drive pulley. reinstalled new belt around drive pulley and reinstalled... Read more

$52.32

Compare At:: $62.26
You Save:: $9.94

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Retaining Clip

5.0 (3)

By: Whirlpool

Part Number: WPY013783

This small retaining clip secures components in place inside the appliance, helping prevent movement, vibration, and premature wear. Replace a bent, fatigued, or missing clip to restore a solid, factory-tight hold.

Holds panels, brackets, or tubing securely in their mounts
Helps maintain alignment to reduce rattles, rubbing, or intermittent issues
Common signs of failure: missing clip, loose fit, buzzing/vibration, parts that won't stay seated
Restores proper retention after service, transport, or vibration-related fatigue

What's included: 1 clip Install notes:

Disconnect power and shut off gas/water before servicing
Note the original clip's orientation; remove with needle-nose pliers
Seat the new clip fully—do not over-bend; spring tension provides the hold
Test operation before reassembly

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Pretty much everything Charlotteanne Y. • Kingston , IL • August 06, 2018

Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more

$6.45

Compare At:: $7.68
You Save:: $1.23

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Washer Inlet Strainer (Water Inlet Screen)

5.0 (1)

By: Whirlpool

Part Number: WP22002960

This small strainer sits inside the washer's water inlet valve and screens out sand, rust, and sediment from the supply lines. Replacing a clogged or missing screen restores normal fill flow and helps protect the valve.

Filters debris from incoming hot and cold water before it reaches the valve and tub
Helps maintain consistent water flow during the fill cycle
A clogged or damaged screen can cause slow fill, very long fill times, or no fill
Common causes for replacement include mineral buildup or rust/sediment from supply lines

What's included: One inlet strainer/screen insert. Install notes:

Unplug the washer and turn off both water supplies
Place a towel or shallow pan, relieve hose pressure, and disconnect the fill hoses from the inlet valve
Carefully pull out the old screen (needle-nose pliers work well); press the new screen fully and evenly into the valve port
Reconnect hoses, restore water and power, and check for leaks
Tip: Many washers have separate hot and cold inlets—inspect both screens and replace as needed

Do-It-Yourself Stories from Customers like You Too much water filled into machine error code fe Terry H. • Columbia , SC • March 02, 2015

The machine would not run a full cycle before it cut off and had the code "FE" and water was too high. The water inlet valve needed to be replaced since it was letting in too much water at time. The repair was easy. Unplug machine and turn off cold water. Remove cold water line and drain water into bucket. Remove back two braces located at the top on each end of machine This will allow you to move top cove back about one inch. Pull back top cover about 1 inch then lift off cover. Remove... Read more

$9.95

Compare At:: $11.84
You Save:: $1.89

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Bearing

4.8 (4)

By: Whirlpool

Part Number: WP40004001

Can be upper or lower bearing depending on application.

Do-It-Yourself Stories from Customers like You Very rough spin cicle Leslie B. • Green Valley , AZ • August 01, 2015

Replace bearing. This was a veryy involved job since I had to disassemble the entire washing machine. Since previously I purchased a seal kit, it came in handy for this repair.Machine is much quieter now. Read more

$60.69

Compare At:: $72.22
You Save:: $11.53

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (12-14 X 1/2)

5.0 (2)

By: Whirlpool

Part Number: WP27001200

This 12-14 x 1/2 screw is a factory fastener used to secure appliance panels, brackets, and components. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and keeps parts properly aligned for reliable operation.

Secures panels, brackets, and internal components to their mounting points
Replaces damaged, rusted, or missing hardware
Helps stop vibration and rattling caused by loose fasteners
Restores proper alignment and stability of covers or assemblies

What's included: One screw Install notes:

Disconnect power and, if applicable, shut off gas/water before servicing
Match the original screw's location and length; replace one at a time
Start threads by hand to prevent cross-threading; tighten snugly without over-torquing
Reinstall any original washers, clips, or spacers used with the screw

Do-It-Yourself Stories from Customers like You My pump belt broke Steven H. • Harleysville , PA • June 15, 2015

This was a very easy fix. Two screws to get the front off of the washer. Removed one side of the tensioner spring. Loosened two screws for the motor and two screws for the pump. I decided to replace the agitate belt even though it wasn't broken.. So, I removed that belt from the pulleys and the removed the broken belt. then just reversed the process to install the belts. it toke me less than 30 minutes and my washer was back in service. Read more

$7.95

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Amana Lw3303w Parts

Thrust Washer

Hose Clamp

Retaining Ring

Screw

Washer Lid Screw

Screw, 1 Piece

Fill Hose

Screw

Spring Fastener (Retaining Clip)

Main Bearing Assembly (Washer)

Adjustable Leg

Drive Belt (Agitate & Spin)

Retaining Clip

Washer Inlet Strainer (Water Inlet Screen)

Bearing

Screw (12-14 X 1/2)