Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Glsw1339cs1 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Gearcase Oil Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: 285352

Prevents oil leaks from your washer's gearcase and keeps internal components lubricated. Replace if you notice oil pooling under the machine.

Do-It-Yourself Stories from Customers like You Not spinning clothes dry   Marjorie S. • Lansing , NC • December 16, 2017

Replaced clutch assembly, gearcase input shaft seal and motor coupler. When I disassembled the washer I realized the shaft seal on the top of the gearcase was leaking and not the input shaft seal. So had to order more parts before I could finish this job. Altogether I replaced agitator dogs, both seals on the gearcase, the clutch assembly and the motor coupler. Agitator dogs replacement is a very easy job, no tools required, takes less that 5 minutes and made a huge difference with how well... Read more

More
$51.62

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10491985

The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.

There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.

Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Oven door outer glass was broken   Slydell B. • Cape Coral , FL • November 26, 2014

Using the parts I ordered, I replaced the glass myself following the very helpful video on your web site. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working   Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Spring Tension Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP356138

The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.

Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.

Symptoms of a bad spring tension hose clamp include:

  • Water leaks around hose connections
  • Loose or disconnected hoses
  • Unusual noises or vibrations during operation
  • Water pressure issues within the washing machine

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Sound Dampening Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63134

The Sound Dampening Ring is an OEM replacement part for Whirlpool washing machines. Located within the clutch housing, it serves to minimize noise transmission from internal components.

Causes relate to years of absorbing internal impacts fatiguing the damping material. Buildup of grime and detergent residue in its ridges may diminish noise-isolating effectiveness over time.

Symptoms of failure include:

  • Excessive humming or clanking sounds from the transmission area
  • Increased cabinet vibrations felt externally during operation
  • Improper sound insulation leads to a louder overall noise profile

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Do-It-Yourself Stories from Customers like You Our washer quit spinning   Howard H. • Walton , KS • November 16, 2015

I did some research to diagnose the problem.After watching the videos I determined it needed a clutch kit. I didn't know the first thing about washing machines,but I ordered the parts and with the provided video,it was a piece of cake. Our washer works great now! Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Water Level Pressure Switch Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP353244

Washer overfilling or not filling properly? A damaged pressure switch hose prevents accurate water level sensing. Easy 15-minute DIY fix with video.

Do-It-Yourself Stories from Customers like You My kenmore washer model 11029828801 was agitating during the fill cycle and the tub would only partially fill also at the end of the spin cycle rinse water was spraying in resoaking the clothes   Jay S. • Hammond , IN • February 07, 2017

I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more

More
$53.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Dryer Grounding Ball
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303281019

This is a small metal grounding ball that sits in the rear drum bearing area of the dryer. It helps dissipate static electricity buildup in the drum during operation. Replace this part if you are experiencing excessive static cling on clothes, static shocks when unloading laundry, or if the original ball is missing or worn.

Do-It-Yourself Stories from Customers like You Dryer drum would not turn   J Kent I. • Anderson , IN • February 22, 2019

I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more

More
$14.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Lid Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10119828

 

The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.

Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.

Symptoms of a bad washer lid screw include:

  • The washer lid feeling loose or wobbling
  • Difficulty in opening or closing the lid
  • Visible rust or corrosion on the screw
  • The lid not staying securely in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool cabrio washer cracked lid (model wtw7800xw2)   Mike M. • West Hartford , CT • November 29, 2016

I just replaced the glass lid and broken plastic frame with the all metal one. Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016): 1 lid part number WP8572026 (AP6013408) for $119.81 2 hinges WP8563964 (AP6004844) for $6.17 each 4 screws WPW10119828 (AP6015313) for $1.97 each Total $140.03 plus $8.95 shipping, grand total $148.98 Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The... Read more

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 285664

Replace a cracked, leaking, or worn washer drain hose. 48 inches long with clamp included. Installs between pump and standpipe for proper drainage.

Do-It-Yourself Stories from Customers like You Drain hose too short and home depot fix leaked   Sara B. • Liberty Hill , TX • August 21, 2015

Ordered a new drain hose and extension part. The prices including shipping were more reasonable than driving back and forth to the store just to piece meal parts together. Very frustrating. I ordered the parts that were specific to our washing machine, it took maybe 5 minutes to install, and everything fit perfectly. Now we're washing again and no leaks! Read more

More
$32.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Spark Module
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10110491

Burners won't light or spark intermittently? This spark module controls ignition for gas burners. Moderate DIY repair, typically behind control panel.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Bad spark module   Dovie D. • Paradise , CA • August 25, 2014

Replaced module: Although the new module was slightly different due to a third or ground terminal that was not on the original I managed to figured out that I did not need to worry about the ground since the existing wiring had already allowed for the connection. Easy repair. I ordered the part one day and it was delivered the next and that was using the least expensive delivery service. You guys are great Read more

More
$133.43

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw (8-32 Thread)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400882

This machine screw is used across appliances to secure brackets, covers, and internal components. Replacing a missing or stripped fastener helps keep parts aligned and tight, reducing vibration and preventing loose or shifting assemblies.

  • Provides machine-thread fastening for panels, brackets, and internal parts
  • Helps eliminate rattling, vibration, and loose fits
  • Restores proper attachment when the original screw is stripped, missing, or corroded
  • Used wherever an 8-32 screw is specified in the service manual or parts list

What's included: One screw

  • Disconnect power to the appliance; turn off gas/water if applicable
  • Match the screw to the original location to confirm size and thread
  • Start threads by hand to avoid cross-threading; use the correct driver
  • Tighten snugly—do not overtighten to prevent stripping or cracking

Do-It-Yourself Stories from Customers like You I had to change the burner switch   Paul C. • Rochester , NY • November 09, 2014

Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part. Read more

More
$8.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Range Leveling Leg
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10058460

Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.

Do-It-Yourself Stories from Customers like You Anti tilt bracket for stovetop oven   Richard O. • Levittown , PA • October 11, 2019

Installed it according to video watched. Read more

More
$9.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Washer Gear Case Oil
Genuine Whirlpool part
By: Whirlpool
Part Number: 350572

Lubricates transmission gears for smooth wash and spin cycles. Replace when degraded or after transmission repairs. Verify compatibility with your model.

Do-It-Yourself Stories from Customers like You Teeth stripped from gear in transmission   Robert G. • Wentzville , MO • June 17, 2015

The parts I purchased from Appliance Parts Pro fit perfectly and were reasonably priced. I received them the next day, which made the Wife (and me) very happy. Although Appliance Parts Pro did not have a repair video for this, I was able to find one online and the machine is washing like new again. The website is well laid out and easy to find what your looking for. Between the available parts and the videos they provide, anyone who is reasonably handy should be able to repair their machine as... Read more

More
$54.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Lid Hinge Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21258

The lid hinge bearing is used for the lid hinges on washers and dryers. When functioning properly, it allows the lid to open and close properly. If this is a problem with the bearing, it could make the lid difficult to move. In some cases, when the lid will not close, it means that the machine will not function correctly. Damaged lid hinge bearings should be replaced as soon as possible.The lid hinge bearings see a lot of work since they are in use whenever the lid of the washer or dryer opens and closes. They could become cracked and broken over time. Replacing the bearings is a relatively simple repair that owners can make on their own.This lid hinge bearing is for use with many models of washers and dryers from Whirlpool, KitchenAid, Roper, Estate, Inglis, Maytag, Admiral, Amana, Crosley, and Magic Chef. This is a genuine OEM replacement part that has been sourced from the manufacturer. The piece is sold individually, so if owners need to replace more than one hinge, they will need to buy multiples.

Do-It-Yourself Stories from Customers like You Whirlpool washer   David L. • Linn , MO • August 31, 2015

With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Console Screw, Single
Genuine Whirlpool part
By: Whirlpool
Part Number: WP388326

This console screw secures the control console to the appliance cabinet or top, keeping the panel tight and aligned. Replace a missing or damaged screw to stop panel wobble and rattling and maintain a snug, stable fit. What it does:

  • Fastens the control console/control panel to the cabinet or top panel
  • Helps maintain alignment and reduces vibration and rattling
  • Replaces a missing, stripped, or rusty original screw
  • Common fix for a loose or lifting console/panel
What's included:
  • 1 screw
Install notes:
  • Disconnect power before service; if applicable, shut off gas/water
  • Support the console to avoid straining wiring harnesses
  • Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
  • Use the correct driver style for your model's hardware

Do-It-Yourself Stories from Customers like You Leaking water from the tub seal   David C. • Bessemer City , NC • January 27, 2018

THIE REPAIR WAS ON A WHIRLPOOL TOP LOAD WASHING MACHINE At first I suspected the leak was from the pump because I had replaced the pump 2 times over 10 years. This time with the cabinet removed and filling the tub with water, I saw water running down one of the steel support arms that go under the tub, so I was guessing that it was coming from the tub seal. I had to use a jumper wire to bypass the Lid Switch so the water would drain. Several months before I had this issue with the water leaking... Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ignitor Assy
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937186

The Ignitor Assembly is an OEM replacement part for Frigidaire dryers. It serves as the ignition source safely firing up burners to initiate drying cycles. 

Causes usually relate to the continual thermal shock experienced from heating and then rapidly cooling over extended use. As a foundational safeguard, ignitors require OEM replacement when arcing declines. 

Symptoms of a faulty ignitor can include:

  • The dryer fails to start or stop heating intermittently   
  • Cycles taking overly long to complete or feel uneven
  • Excessive service calls relating to "no heat" troubles  
  • Risk of uncombusted gas pooling in dryer if ignition falters

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Gas smell in the dryer after a cycle completed no smell outside the dryer (until i opened the door!)   Matthew M. • Mcfarland , WI • April 25, 2016

Frigidaire Gallery gas dryer from maybe 15 years ago. Based on the fact the the smell was only in the dryer, I concluded it must be the gas valve failing to completely seal when closed. After looking at the insides again, I suppose it is possible that it was a connection near the burner, but that stuff had remained untouched for 10 years so I still think I made a good assumption. I got a new ignitor as well since I was in there, and compared to the valve, it was cheap! I thought I could get in... Read more

More
$71.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google