High Voltage Control Board Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185976
Dryer runs but won't heat or won't stop at cycle end? The timer controls heating element power and cycle completion. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Timer wouldnt stop at the end of cycle then it quit heating Steve I. • Hulbert , OK • June 06, 2015
Used ohm meter on all thermostats and element.everything looked good.wasnt getting power to element unless you wiggled timer knob .ive used this website a bunch because it beats everyone else's prices
Read more
More
Genuine Ge part
By: Ge
Part Number: WR55X10996C
Refrigerator not cooling or display panel blank? The main control board regulates temperature, defrost cycles, and compressor operation. DIY repair in 1 hour.
Do-It-Yourself Stories from Customers like You
Mother board failed Denice M. • Nazareth , PA • December 03, 2016
Ordered a new mother board install was easy and everything is working great. Web site was easy to navigate . Part came in one day.Thank you
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304531885
Fix a refrigerator that won't cool, runs constantly, or has non-responsive controls. This control board manages temperature and defrost cycles. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Faulty circuit board Carol G. • Charlestown , NH • April 01, 2025
Removed bad board and replaced with new board
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11449482
Fixes refrigerator not cooling, compressor not running, or frost buildup. This control board manages cooling cycles and temperature regulation.
Do-It-Yourself Stories from Customers like You
Electronic Control Kenneth B. • Naples , FL • May 11, 2022
You sent me the right part. I took the circuit board out of my ref. put the new one in.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8557301
This is a 60 Hz electromechanical timer that controls the sequence and duration of wash, rinse, and spin cycles in a washing machine. It uses a small motor and a series of internal cams and contacts to advance the machine through each stage of the laundry cycle. Replace this timer if the washer gets stuck on one cycle, skips cycles, won't advance, or fails to start altogether.
Do-It-Yourself Stories from Customers like You
Timer control was not working Cornelio L. • West Covina , CA • April 19, 2014
I searched online and found Appliance Parts Pros to have the best price and an instructional video on how to replace this part. I've never done any type of repairs on a washing machine and figured I would give it a try. My washer is approx. nine years old and in good condition, and either I would repair this on my own or buy another. It took me about 30 min. to remove and replace the part, once this was completed I put the washing machine back into operation. Hurray!!!!!! did not have to spend...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10177195
Fixes unresponsive buttons, display errors, or failed oven functions. Controls all cooking modes and temperatures. DIY-friendly, 30-45 minute install.
Do-It-Yourself Stories from Customers like You
Several of the keypad buttons stopped working Robin H. • Jamaica Beach , TX • January 08, 2017
Called an appliance guy, who said the control panel needed to be changed and quoted me $600. Luckily I Googled the model number and found this website. After seeing that several other people had had the same problem and that the membrane was recommended (not the control panel), I took a chance and ordered the part. One of the other posters recommended a Japanese YouTube video which I easily found and watched first. I highly recommend watching the video first. It's not a hard repair but he...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241973711
Fix ice/water dispenser not working or SY CE error code. This dispenser control board restores ice and water selection. Moderate DIY repair, 1-2 hours.
Do-It-Yourself Stories from Customers like You
Error code sy ce on the front control panel Dante B. • New Orleans , LA • January 15, 2015
We have a Frigidaire LGHS2667KE0. I’m not an appliance technician. Our refrigerator was not working. We were getting an error code SY CE on the front control panel. I tried unplugging it for about an hour and plug it back in. The refrigerator would cut off and on for about 30 seconds, shut down and beep leaving me with the same code. I called an appliance repair technician who pulled the main board from the front bottom of the refrigerator. He believed it was a relay and or the...
Read more
More
Genuine Samsung part
By: Samsung
Part Number: DE92-02588G
Fix a blank display, unresponsive touchpad, or SE error code on your gas range. This control board restores oven functions in 15-45 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
The numbers on the key pad stopped working Charles G. • Bryan , TX • July 24, 2016
Unplugged the stove. Removed the back of the control panel. Removed and replaced the membrane keyboard and the main PCB. Reassembled the stove and everything was back to normal. The PCB was probably ok but I wanted to be sure and get the stove working as soon as possible so I replaced both parts at the same
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8299781
If your dryer won't heat properly or runs continuously without stopping, the timer may need replacement. Common DIY repair, moderate difficulty.
Do-It-Yourself Stories from Customers like You
It wouldn't heat and the timer wouldn't cut off until you opened the door Glenda E. • Belhaven , NC • March 11, 2015
My husband took the old timer out and replace it with the new. Now it worked fine. Being we order the other parts we decided to replace them.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB27X32632
Selector knob or dial stopped working? This encoder board translates rotary control input into signals. Moderate DIY repair requires control panel removal.
Do-It-Yourself Stories from Customers like You
Selector knob stopped functioning Jeffrey E. • Plymouth , MN • September 03, 2016
Replaced the "Encoder Board". My GE Advantium control panel came of fairly easily. There was 2 screws on top to remove a vent director giving access to a single screw that held the control panel in place. Once I removed that screw, I had to slide the control panel upwards by about 1/2" before it came off. At this point, I took several photographs of the wire connections to make sure I could reassemble them correctly... there were many! After unplugging the wire harnesses and connections, I...
Read more
More
Genuine Ge part
By: Ge
Part Number: WR55X21623
Fix a refrigerator that won't defrost or has an iced-up evaporator coil. This defrost control board manages defrost cycles to prevent frost buildup.
Do-It-Yourself Stories from Customers like You
The evaporator coil kept getting heavily frosted and the compressor ran almost continuously Reid D. • Santa Maria , CA • April 01, 2016
The defrost heater element looked good and had continuity. The defrost thermostats checked good, so that just left the Defrost Module as the likely suspect. I installed a new defrost control module and thermostats. The thermostats were inexpensive and the old ones could have been intermittent,
The only "tricky" part was finding out how to get to the back screw that holds the main control panel. Discovered that the return air duct surrounding the control panel needed to come off. It helps...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509983
Fix F99, F13 error codes, dead display, or non-working oven timer. This clock control board restores all timer and bake functions. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Timer and oven weren't working Robert F. • Holt , MI • November 10, 2015
Replaced Oven Control Board. I already had removed the old part when I ordered the replacement. Part showed up in 48 hours. It took me about two minutes to install the new part. Tested to make sure it worked, then another 30 seconds to screw the back panel of the stove on.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10756692
This motor control board is created for use with washing machines. It's located inside the washing machine, where users can change settings and start or stop the appliance. It is tasked with regulating how quickly the washer spins during a cycle. Wear and tear or damage can cause the motor control board to malfunction. This may make it impossible for the washer to agitate or spin. If this happens, a replacement will need to be made.To replace this part, start by unplugging the appliance. Once the area is safe, the bottom front panel should be removed. This will provide access to the original motor control board. Pull on the motor control board until the wires can be reached. The position of these components should be noted before taking out the part. Replace with a new motor control board and replace the wires.This motor control board is designed to fit washing machines made by Maytag, Whirlpool, Kenmore, and KitchenAid. This is an authentic OEM replacement part that is sourced directly from the manufacturer. It's sold as a single part.
Do-It-Yourself Stories from Customers like You
Whirlpool duet washing machine 7mghw9100mw1 with f06 error code Isaac G. • Mcallen , TX • November 03, 2014
We started getting the F06 code when on the normal cycle it was time to Rinse/Spin, pointing to a speed/tachometer issue on the motor. After several attempts of unplugging from power and restarting the cycle it would eventually start working for the rest of the laundry session. The Whirlpool technician after a brief look on the underside determined it was the motor and had to be replaced, even tough all troubleshooting tests on the motor were ok. I insisted that the probability was much higher...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285179
Dishwasher won't turn on or start? A faulty control board often causes no power, flashing lights, or incomplete cycles. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
My dishwasher would not power on Justen T. • Park Ridge , IL • June 13, 2014
After looking for solutions online and watching some short videos, we decided to open the dishwasher up and try to fix it ourselves. We opened it up and found the circuit board had burned out causing a horrible odor. We ordered our new board, popped it in and we now have a working dishwasher. Hooray!
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 12022212
The Control Board is an OEM part for Bosch wall ovens. It serves as the main control center for the oven, managing and regulating all the functions, including temperature settings, cooking modes, timers, and the operation of the heating elements.
Causes of a bad Control Board can include electrical surges, wear and tear from prolonged use, exposure to heat, and moisture or grease buildup that can damage electronic components.
Symptoms of a bad Control Board include:
- The oven not powering on or failing to respond to control inputs
- Display errors or malfunctioning display screen
- Inaccurate temperature regulation or inability to maintain set temperatures
- The oven not completing cooking cycles or shutting off unexpectedly
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
E115 over heating error on thermador oven Sharon H. • Laguna Niguel , CA • December 26, 2021
Replaced the main control board on a Thermador oven model POD301J/01 after we got an E115 error and the top broiler would come on no matter what setting you put it on and wouldn't turn off and would overheat.
Took me about 30 mins total to replace after taking pics to make sure everything went back as it was.
So far so good and it's working again!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304528982
Fix dishwasher buttons not responding or flashing lights with this control panel interface. Restores cycle selection when touchpad fails or stops working.
Do-It-Yourself Stories from Customers like You
Key pad on dishwasher quit working Daniel J. • 29 Palms , CA • December 30, 2025
Replaced key pad and module
Read more
More