Agitator Parts

The plastic ridges on the inside of the washplate were stripped. New washplate solved the problem. This washer is barely 3 years old, so I guess I can expect to be doing this again, but better than buying a new washer. Read more

There was a single bolt through the bottom of the agitator that connected it to the tub. Undoing the bolt to remove the broken base of the old agitator, placing the bolt in the base of the new agitator, aligning and tightening the bolt. Read more

Bought a new upper agitator/filter housing. Just slide it over the bottom agitator housing and put the cap from the old one on the new one. Takes maybe 3 minutes to do. The screen inside the lower part of the housing/filter holds it snug to the bottom housing and does not fly off during the spin cycle. Works great. Read more

I have a 25 year old Kenmore washer that works well and didn't want to get a new washer as they don't make them like they used to. Upon removing the top cap of the agitator and doing an inspection, the agitator dogs were completely broken into pieces. Due to age we decided to replace the lower and upper agitator along with the agitator auger dogs repair kit. All new parts and works fine. On inspection of old parts, we probably could have gotten away with just a $5 repair for the plastic... Read more

I have a 25 year old Kenmore washer that works well and didn't want to get a new washer as they don't make them like they used to. Upon removing the top cap of the agitator and doing an inspection, the agitator dogs were completely broken into pieces. Due to age we decided to replace the lower and upper agitator along with the agitator auger dogs repair kit. All new parts and works fine. On inspection of old parts, we probably could have gotten away with just a $5 repair for the plastic... Read more

Simple by using 7/16 socket with long extension to remove the bolt and pull the whole agitator out and clean them. Put back in together with new parts. It works fine now. Read more

• Will not agitate

Replaced agitator. Read more

Ordered a agitator Read more

• Will not agitate

Removing the aluminum hub was ridiculous. this part should come with the rubber piece that is directly below it. removing that rubber piece is essential to the repair and is quite a battle to get off. To remove the aluminum hub ( no fasteners just a friction fit) I tried a 2 arm automotive wheel puller which pulled the arms through the aluminum with out budging the part. I finally resorted to using a Sawsall to cut a vertical slit into the hub down to the shaft so I could split it and get it... Read more

I had to replace the drive shaft and the lower agitator. The motor coupling was also worn out. The repair was challenging because I had to rebuild the gear box. This step was really messy and I had to wait for the liquid gasket to set prior to completing the repair. Cleaning and prep of all of the parts tripled the repair time. Read more

Replaced worn dogs using Cam-Agit kit. Works great and only took about 10 minutes with a 7/16" socket. The video was very helpful. Thanks to AppliancePartsPros.com. Highly recommended. Read more

Snapped in cap Read more

Ordered new parts and simply put back in place. Works fine Read more