Generator Start Switch Parts
Genuine Ge part
By: Ge
Part Number: WB24T10119
Burner won't heat or stays on constantly? The infinite control switch regulates burner temperature. Simple DIY fix with basic tools in under 30 minutes.
Do-It-Yourself Stories from Customers like You
GE profile cooktop problems: dirty switch seals in glass top shorted infinite switch broken selector switch missing knob Hugh A. • Weaverville , CA • March 06, 2019
My cooktop repair was a total success from start to finish. I reviewed and later followed the APP repair video, which helped me decide if I wanted to tackle the repairs and guided me right before I started. The APP phone staff member was very helpful verifying the parts I had identified online using the model number of my older GE Profile cooktop to locate and view the correct online exploded view diagram. I told him it was a pleasure working with him. The parts arrived within 3 days of...
Read more
More
$85.95
- Compare At:
-
$102.28
- You Save:
-
$16.33
Genuine Lg part
By: Lg
Part Number: EBF61496102
This safety interlock assembly secures the washer door and signals the control when it's safe to run a cycle. Replacing a faulty unit helps restore proper locking and start functions to prevent interruptions and error codes.
- Locks the washer door and confirms it is closed to allow the cycle to start
- Sends door-closed/locked status to the control throughout the cycle
- Helps prevent the door from opening during spin or when water is present
- Common symptoms: won't start, won't lock/unlock, door error (dE) messages, cycle stops mid-wash
What's included: One safety switch assembly as shown. Install notes:
- Disconnect power before servicing; wear cut-resistant gloves
- Access the lock at the door opening; remove the mounting screws and disconnect the harness
- Transfer connectors to the new assembly, align, and secure without overtightening
- Ensure the door strike aligns smoothly with the new lock before testing
Do-It-Yourself Stories from Customers like You
Dryer would not come on Leroy L. • San Francisco , CA • December 28, 2014
Bought a new switch assembly, watched the video, and replaced the switch. Thr dryer now runs fine. Replacement part matched esxactly.
Read more
More
$47.41
- Compare At:
-
$55.94
- You Save:
-
$8.53
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3404233
Dryer won't start when you press the button? The start switch initiates the drying cycle. Simple 10-minute DIY fix with basic tools and our guide.
Do-It-Yourself Stories from Customers like You
Timer & start switch had failed on my whirlpool dryer Richard H. • Davenport , FL • November 07, 2014
Identified the parts I needed on the AppliancePartsPros.com website using the Dryer model number. Delivery was within 3 days by courier - excellent. Parts fitted, console reassembled and my dryer was back up and running within 40 minutes. No more intermittent problems with the timer not working - brilliant!!
Read more
More
$54.25
- Compare At:
-
$65.10
- You Save:
-
$10.85
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935086
The Surface Unit Switch Kit is an OEM part for Frigidaire ranges. It controls the power and heat levels to the surface burners on the cooktop, allowing you to adjust the temperature for cooking. This kit typically includes the necessary components to replace a faulty switch and restore proper functionality to the burners.
Causes of a bad surface unit switch can include electrical malfunctions, wear and tear from regular use, or damage due to spills or impacts. A faulty switch can prevent the burner from heating correctly or at all.
Symptoms of a bad surface unit switch include:
- Burners not heating up or heating unevenly
- Inability to adjust the burner temperature
- Burners not turning on or off properly
- Sparks or electrical odors near the switch
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My kenmore electric range burners were constantly on high Eric M. • Long Beach , CA • January 23, 2017
When I called customer service your representative at Appliance Parts Pros was able to help me diagnose the problem and order the two parts that I needed. both parts arrived the next day and with helpful tutorial videos I was able to replace both the Surface Unit Switch and the Universal Element in less than 45 minutes.
Thanks so much for the great service and the money you saved me.
Read more
More
$46.35
- Compare At:
-
$55.16
- You Save:
-
$8.81
Genuine Whirlpool part
By: Whirlpool
Part Number: W10857622
If your burner won't heat, stays on high, or only works on low, replace the infinite switch. Simple 20-minute DIY repair with just a screwdriver.
Do-It-Yourself Stories from Customers like You
New control switch for burners Kenneth D. • Wayne , OH • March 29, 2024
Took the back off the stove, took the switch out put the new switch in but it all back up
Read more
More
$162.69
- Compare At:
-
$193.60
- You Save:
-
$30.91
Genuine Samsung part
By: Samsung
Part Number: DA34-00066C
The Refrigerator Door Interlock Switch is essential for maintaining the proper operation of your refrigerator. This genuine OEM part ensures that your refrigerator doors close securely, allowing the appliance to maintain the correct temperature and efficiency. By accurately detecting whether the door is open or closed, the switch helps prevent energy loss and ensures that your food stays fresh longer. Designed specifically for Samsung refrigerators, this interlock switch offers a reliable and precise fit, making it a perfect replacement for any faulty or worn-out switches. Installing this genuine OEM part is straightforward, helping you restore your refrigeratorGÇÖs functionality quickly and easily. With the Refrigerator Door Interlock Switch , you can trust that your Samsung refrigerator will operate smoothly, providing you with peace of mind and a consistent cooling performance. Upgrade your appliance with this dependable component and enjoy the benefits of a well-functioning refrigerator.
More
$35.95
- Compare At:
-
$66.66
- You Save:
-
$30.71
Genuine Samsung part
By: Samsung
Part Number: 3405-001033
Fix a microwave that runs but won't heat or won't start when door closes. This door switch is a common fix—most DIYers replace it in 15 minutes.
Do-It-Yourself Stories from Customers like You
Microwave would say "cook" and timer would count down but turntable would not rotate and magnetron did not turn on Kathy K. • Athens , GA • January 12, 2016
Checked the three door switches; used ohm meter to see if there was resistance or if a switch was bad. 2 out of 3 switches showed resistance with the ohm meter. The last one tested (of course the last one) NO (normally open) did not show resistance; I.e. the ohm meter reading did not change when the switch was depressed. Appliance parts pros was the only company that had the same model number I was looking for (SZW-V16-FD-63). I ordered the relay switch, 2 days later it arrived (regular...
Read more
More
$30.54
- Compare At:
-
$36.34
- You Save:
-
$5.80
Genuine Ge part
By: Ge
Part Number: WB18X31213
Burners won't light or igniters click constantly? This igniter switch and wiring harness assembly restores spark ignition on gas range surface burners.
Do-It-Yourself Stories from Customers like You
Faulty burner ignition switch on my GE gas range all five burner would spark when the stove was plugged in to the power outlet. Douglas J. • Pacifica , CA • January 21, 2024
Replacing the bad harness switches with the new set fixed the problem.
Read more
More
$23.38
- Compare At:
-
$28.06
- You Save:
-
$4.68
Genuine Samsung part
By: Samsung
Part Number: DE96-00414A
Microwave won't start or keeps running with door open? This door latch and switch assembly restores safe operation. Moderate DIY repair (1-2 hours).
This part fixes the following symptoms
-
shuts off after a few seconds
See more...
Do-It-Yourself Stories from Customers like You
Microwave oven fan would come one when i opened the door Jay W. • Waxhaw , NC • April 22, 2017
I did some searching on the internet to see if others had the same issue I was having. There were many who had the same problem and everyone of them fixed it by changing out the latch switches, which in my case, were part of the latch body assembly. So I ordered the part from AppliancePartPros and it arrived on Tuesday, 2 business days after I ordered it, which was just as expected.
I had also done some research regarding how to replace the latch body assembly and, although I couldn't find...
Read more
More
$56.39
- Compare At:
-
$67.10
- You Save:
-
$10.71
Genuine Ge part
By: Ge
Part Number: WR23X21444
The GE Door Light Switch is an OEM Replacement Part that serves as the Freezer Door Fan and Light Switch. The switch is made from metal, wiring, and plastic. It plays an essential role in energy conservation by turning off the light when the refrigerator or freezer door is closed
Over time, the door light switch can wear out or fail due to frequent use, exposure to moisture, or electrical issues. When this happens, the interior light may not function correctly, which can hinder visibility inside the refrigerator.
Symptoms of a bad door light switch may include:
- Interior light not turning on when the door is opened
- Interior light not turning off when the door is closed
- Flickering or intermittent operation of the interior light
This switch is compatible with select GE and Hotpoint models.
Do-It-Yourself Stories from Customers like You
Replace light switch on refrigerator and freezer sides Glenn C. • Venetia , PA • July 15, 2016
Pop out the old switches with a putty knife pressing down on the tab, grabbed with pliers to pull out, disconnect the wires and connect new switches, pressing back in place.
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 154773201
Dishwasher won't fill with water? A faulty water level float switch prevents proper filling. This switch assembly typically takes 15 minutes to replace.
Do-It-Yourself Stories from Customers like You
Dishwasher would not fill Eric D. • Indianapolis , IN • March 02, 2020
Replacing the inlet valve solved the problem. The old valve was somehow clogged with white sediment. I probably could have taken it off and cleaned it out if I'd known, but replacing the valve was much easier. Took about half an hour to repair. Video walk through was extremely helpful. Great to have a working dishwasher again!
Read more
More
$57.39
- Compare At:
-
$68.29
- You Save:
-
$10.90
Genuine Samsung part
By: Samsung
Part Number: 3405-001117
Fix ice or water that won't stop dispensing with this dispenser control switch. Resolves stuck dispenser issues. DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Icemaker / water dispenser would not shut off David R. • Montgomery , TX • May 07, 2016
First, I modified old butter knife by bending a 90° angle about 3/4" from the tip. I slid the bent in up under the bottom of the switch cover and worked it to one side. I then rotated the knife downward using the bent end to pry the cover off. The switch is held by plastic arms on each side. The bottom right arm has a locating pin that fits into the switch. Unplugged the switch and re-installed.
Read more
More
$21.26
- Compare At:
-
$25.51
- You Save:
-
$4.25
Genuine Ge part
By: Ge
Part Number: WH12X10065
Fix a washer that overfills or won't start the wash cycle. This water level pressure switch detects proper fill levels. DIY-friendly repair.
This part fixes the following symptoms
-
Will not fill with water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Bad switch Daniele H. • Milford , CT • February 12, 2015
Hmm...watched video after reading on web of running water problem with GE washer....common fail
.....moving stuff to get to the washer took all the time, easy fix but a lot of screws to remove and looking time
APP site very good, will order again if need be thanks
Read more
More
$55.30
- Compare At:
-
$65.25
- You Save:
-
$9.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 903136-9010
Burner won't turn off or heat properly? This range burner switch controls power flow to surface elements. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Burner switch was not turning the burner off Mary K. • Dublin , GA • July 13, 2014
We cut the power, took the control panel off, got the burner switch number from the original part, and ordered a new one. We were a little worried at that point, because your website offered a "replacement" part, with a different number than the original. However, we put the model number into your double check feature and were assured that we were getting the right part. The part arrived in two days and frankly we were still worried, because the new part was slightly larger than the original....
Read more
More
$79.95
- Compare At:
-
$95.94
- You Save:
-
$15.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W11129442
Fixes burners that won't heat, stay on high, or make clicking sounds. Controls temperature settings on electric cooktops. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Bad stove switch Roger G. • The Villages , FL • September 12, 2021
Replaced the stove switch.
Read more
More
$74.95
- Compare At:
-
$89.19
- You Save:
-
$14.24
Genuine Bosch part
By: Bosch
Part Number: 00165256
Dishwasher won't fill or keeps overfilling? The float switch detects water levels for proper filling and draining. Accessible repair in under 30 minutes.
This part fixes the following symptoms
-
overflowing
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Inlet valve would not open to let water into the dishwasher Kurt J. • Burnsville , MN • January 09, 2015
I checked continuity at the float switch since I knew the inlet valve was working when direct wired to 120v. Switch did not have continuity. Replaced switch and inlet valve worked at start of cycle.
Read more
More
$31.35
- Compare At:
-
$37.62
- You Save:
-
$6.27