We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
This mechanical timer controls the sequence and duration of wash, rinse, and spin cycles in the washing machine. It advances through each stage of the cycle and signals the appropriate components to turn on and off. Replace this timer if the washer gets stuck on one cycle, skips cycles, won't advance, or fails to start.
Based on an internet search, the likely problem seemed to be a bad timer-control switch because it would hum and click but not advance on a 17-year old washer. Repairman diagnosed the problem as a bad lid-switch-assembly and replaced it - problem solved. Now I need to return the Timer-Control. AppliancePartsPros was very quick to ship the Timer-Control and have a great return policy for an unneeded part. Read more
Dryer won't start or dial spins freely? This timer control regulates cycle length and component operation. Straightforward repair for most DIYers.
TIMER WITH KNOB
Ordered that there part from this place. Shipped quick like. Dryer ain't broke no more. Read more
This motor control board regulates the washer's drive motor, controlling spin speed and direction during wash and spin cycles. It is typically mounted near the bottom of the washer behind the front or rear access panel. Replace this board if the washer won't spin or agitate, stops mid-cycle, or if the motor runs erratically or not at all.
After much reading on line regarding my problem. I decided to do any test that I could to try to diagnose and fix this myself if I could. This took a lot of time and patience to get the answers on how to go about this from "experts" as some of the info was contradictory. I was almost about to give up and buy a new washer with less electronic parts and buttons as advised by an honest appliance technician . I tried one more thing first which was to disconnect the lead wires connected to the MCU .... Read more
Fix a refrigerator that won't cool or has freezing issues. This main control board regulates temperature and system cycles. Moderate DIY repair.
This was a newer GE Monogram side-by-side unit that used an inverter compressor. I removed the inverter and used an ohmmeter to measure the resistance of each of the three windings. They were all very close to one another: about 6.8 ohms per winding. I concluded that the compressor was probably not at fault. The inverter kind of burned or chemical-ish, and, when opened, showed an electrolytic capacitor had burst. I replaced the inverter with an overnight part from Amazon. It was the same... Read more
The Control Panel is an OEM part for LG dishwashers. It is the interface that allows users to select and control various washing cycles and settings on the dishwasher. The control panel includes buttons or a touchpad that sends signals to the dishwasher's main control board, ensuring the correct operation of the appliance.
Causes of a bad control panel can include electrical malfunctions, physical damage to the buttons or touchpad, or wear and tear from frequent use. Moisture intrusion or accidental impacts can also contribute to the failure of the control panel.
Symptoms of a bad Control Panel include:
This OEM LG part is also compatible with Sears/Kenmore.
When I ordered the control board the young lady told me that I had to take the front off the dishwasher. I did exactly as she said and started to put the new control board on. I could not unplug from the old one and finally my son came by and did that. I then put everything back together and turned it on. IT WORKED. Thank you. I should probably tell you that I am a 75 year old woman and if I can do it, anyone can. Read more
Fix a dishwasher that won't start, has no display lights, or beeps randomly. This control board manages all cycles and functions. DIY-friendly repair.
Replaced the control board. Read more
Refrigerator not cooling or display panel blank? The main control board regulates temperature, defrost cycles, and compressor operation. DIY repair in 1 hour.
Ordered a new mother board install was easy and everything is working great. Web site was easy to navigate . Part came in one day.Thank you Read more
Fix a refrigerator that won't cool, runs constantly, or has non-responsive controls. This control board manages temperature and defrost cycles. DIY-friendly.
Removed bad board and replaced with new board Read more
Dryer runs but won't heat or won't stop at cycle end? The timer controls heating element power and cycle completion. Moderate DIY repair, 30-45 minutes.
Used ohm meter on all thermostats and element.everything looked good.wasnt getting power to element unless you wiggled timer knob .ive used this website a bunch because it beats everyone else's prices Read more
Fixes refrigerator not cooling, compressor not running, or frost buildup. This control board manages cooling cycles and temperature regulation.
You sent me the right part. I took the circuit board out of my ref. put the new one in. Read more
This is a 60 Hz electromechanical timer that controls the sequence and duration of wash, rinse, and spin cycles in a washing machine. It uses a small motor and a series of internal cams and contacts to advance the machine through each stage of the laundry cycle. Replace this timer if the washer gets stuck on one cycle, skips cycles, won't advance, or fails to start altogether.
I searched online and found Appliance Parts Pros to have the best price and an instructional video on how to replace this part. I've never done any type of repairs on a washing machine and figured I would give it a try. My washer is approx. nine years old and in good condition, and either I would repair this on my own or buy another. It took me about 30 min. to remove and replace the part, once this was completed I put the washing machine back into operation. Hurray!!!!!! did not have to spend... Read more
Fixes unresponsive buttons, display errors, or failed oven functions. Controls all cooking modes and temperatures. DIY-friendly, 30-45 minute install.
Called an appliance guy, who said the control panel needed to be changed and quoted me $600. Luckily I Googled the model number and found this website. After seeing that several other people had had the same problem and that the membrane was recommended (not the control panel), I took a chance and ordered the part. One of the other posters recommended a Japanese YouTube video which I easily found and watched first. I highly recommend watching the video first. It's not a hard repair but he... Read more
Fix ice/water dispenser not working or SY CE error code. This dispenser control board restores ice and water selection. Moderate DIY repair, 1-2 hours.
We have a Frigidaire LGHS2667KE0. I’m not an appliance technician. Our refrigerator was not working. We were getting an error code SY CE on the front control panel. I tried unplugging it for about an hour and plug it back in. The refrigerator would cut off and on for about 30 seconds, shut down and beep leaving me with the same code. I called an appliance repair technician who pulled the main board from the front bottom of the refrigerator. He believed it was a relay and or the... Read more
Fix a blank display, unresponsive touchpad, or SE error code on your gas range. This control board restores oven functions in 15-45 minutes with basic tools.
Unplugged the stove. Removed the back of the control panel. Removed and replaced the membrane keyboard and the main PCB. Reassembled the stove and everything was back to normal. The PCB was probably ok but I wanted to be sure and get the stove working as soon as possible so I replaced both parts at the same Read more
Selector knob or dial stopped working? This encoder board translates rotary control input into signals. Moderate DIY repair requires control panel removal.
Replaced the "Encoder Board". My GE Advantium control panel came of fairly easily. There was 2 screws on top to remove a vent director giving access to a single screw that held the control panel in place. Once I removed that screw, I had to slide the control panel upwards by about 1/2" before it came off. At this point, I took several photographs of the wire connections to make sure I could reassemble them correctly... there were many! After unplugging the wire harnesses and connections, I... Read more
If your dryer won't heat properly or runs continuously without stopping, the timer may need replacement. Common DIY repair, moderate difficulty.
My husband took the old timer out and replace it with the new. Now it worked fine. Being we order the other parts we decided to replace them. Read more