Gdfe10pgj2bb Parts

Restore safe, organized loading on the top level. Replacing a damaged upper rack brings back smooth sliding, proper item placement, and dependable use without snagging or collapsed tines.

What it does

• Holds cups, glasses, and bowls securely on the upper level
• Helps prevent items from tipping or falling through the rack
• Restores smooth slide-in/slide-out when rails and rollers are intact
• Replaces racks with broken, rusty, or missing tines

What’s included
One upper rack assembly.

Install notes

• Open the door, pull the rack to the stops, then release/remove end caps to slide the rack out
• Seat the new rack on the rails and reinstall end caps—do not force
• Transfer any clip-on accessories from the old rack if applicable
• Run a quick rinse cycle to confirm smooth travel

The Lower Door Gasket is an OEM part for GE dishwashers. It is placed at the bottom of the dishwasher door to create a water-tight seal during operation, preventing leaks and ensuring that water remains within the unit during the wash cycle. 

Symptoms of a bad Lower Door Gasket include:

• Water leaking from the bottom of the dishwasher door
• Signs of mold or mildew near the gasket area
• Frequent puddles or drips underneath the door after a wash cycle
• The gasket becoming hard, cracked, or visibly damaged

Causes of a bad Lower Door Gasket can include regular wear and tear, exposure to harsh detergents and high temperatures, or improper installation that leads to uneven sealing.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Bring back smooth loading on the bottom level. This lower dishrack replaces bent or rusty racks so dishes sit securely and the rack glides cleanly without snagging or collapse.

What it does

• Holds plates, bowls, and cookware securely on the lower level
• Helps prevent items tipping or falling through broken tines
• Restores smooth slide-in/slide-out when rails and rollers are intact
• Replaces racks with rusted welds, missing sections, or warped frames

What’s included
One lower rack assembly.

Install notes

• Open the door, pull the rack to the stops, remove end caps, and slide the old rack out
• Seat the new rack on the rails and reinstall end caps—do not force
• Transfer any clip-on accessories or tine clips from the old rack if reusable
• Run a quick rinse to confirm smooth travel

The Door Latch is an OEM replacement part for GE dishwashers. It serves the critical function of securely keeping the door closed during wash cycles through its engaging bolt design.

Over extended use, aspects of the latch can degrade such as worn plastic catch areas, loosened screws, or a faulty latch hook mechanism. Causes are generally normal wear and tear. 

Symptoms of a bad latch include: 

• The door not closing fully or popping open accidentally  
• Inability to fully lock or latch no matter how hard the door is pressed
• Damaged or stripped screws holding the mechanism 

This OEM replacement part is compatible with Hotpoint, RCA and some Kenmore models as well.

The Lower Rack is an OEM replacement part for GE dishwashers. The lower rack is where you place dishes, pots, and pans for cleaning during the wash cycle.

Symptoms that may indicate the need for this replacement kit include:

• Cracks, warping, or damage to the existing lower rack
• Issues with the existing lower rack not rolling smoothly or coming off the tracks

Causes of needing to replace the lower rack can include normal wear and tear over time, exposure to high heat or harsh detergents, or physical damage from mishandling or impact.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models,

Note: If your original silverware basket was mounted on the front of your original rack, the new rack does not support that mounting. The silverware basket must be placed inside the new rack.

The Tub Gasket is an OEM part for GE dishwashers. It is installed around the perimeter of the dishwasher door to create a water-tight seal during operation, effectively preventing water leaks. This gasket ensures that the dishwasher can maintain the necessary water level and pressure to clean dishes effectively, while also protecting your kitchen from water damage.

Causes of a bad Tub Gasket can include natural wear and tear from regular use, exposure to harsh cleaning chemicals that can degrade the rubber material, or improper installation leading to gaps or loosening.

Symptoms of a bad Tub Gasket include:

• Water leaking from around the dishwasher door
• Signs of mold or mildew on the gasket
• The gasket becoming hard or cracked
• Visible gaps between the gasket and the dishwasher door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Spray Arm Assembly is an OEM replacement part compatible with GE dishwashers. This assembly consists of the tubular spray arm and attached brackets that secure it underneath the upper dish rack.

Causes of a bad lower spray arm assembly can include mineral buildup that clogs spray holes over time or cracks/breaks from daily rack loading.

Symptoms of a bad lower spray arm assembly include:

• Inadequate cleaning of lower rack dishes
• Dirty dishes or glasses underneath with noticeable hard water spots
• Rattling or clicking noises from the loose spray arm during cycles

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.  

NOTE:  The Manufacture has updated the spray arm. The spary arm no longer has the metal ends on the tips  of the heat sheild is no longer required per the manufacture. 

The Bearing Slide Assembly is an OEM component for GE electric clothes dryers. As an integral part of the dryer tumbler system, this assembly includes the bearing slides that allow smooth rotation of the tumbler drum during drying cycles. 

Symptoms of faulty bearing slides include:

• Abnormal vibrations or shaking of the dryer cabinet 
• Noisy operation that gets louder over time
• Rubbing or grinding sounds coming from inside the machine
• Reduced tumbler movement or inability to manually turn the drum

Causes involve general wear of plastic bearing surfaces from years of drum rotation as well as potential damage or misalignment from excess stress on the slides.

This GE OEM replacement helps maintain balanced tumbler movement. Compatible with Hotpoint, RCA, and some Kenmore dryers using the bearing slide assembly design.

The Heating Element is an OEM part for GE dishwashers. It is responsible for heating the water during the wash cycles and for drying the dishes after the rinse cycle. Proper functioning of the heating element ensures optimal cleaning and drying performance.

Causes of a bad heating element can include mineral buildup from hard water, electrical faults, or general wear and tear over time. Damage to the heating coil or connections can also impair its functionality.

Symptoms of a bad heating element include:

• Dishes not drying properly
• Dishwasher cycles taking longer than usual
• Water not heating during the wash cycle
• Error codes related to heating issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Flood Switch Assembly is an OEM part for GE dishwashers that is responsible for detecting water levels in the dishwasher's base, preventing potential flooding by shutting off the water intake if an overflow is detected. This helps in avoiding water damage to your home and ensuring the dishwasher operates normally.

Symptoms of a bad Flood Switch Assembly include:

• The dishwasher not filling with water  
• Water not draining properly 
• The dishwasher stops during a cycle 

Causes of a bad flood switch assembly can vary from debris accumulation affecting the float's movement to electrical issues within the switch mechanism. Over time, wear and tear on the float or switch can lead to failures.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.

What it does

• Supports and guides the lower rack along the tracks
• Replaces broken, missing, or flat-spotted wheels and cracked carriers
• Helps prevent the rack from popping off the rails during loading
• Reduces drag that leads to stiff, uneven rack travel

What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.

Install notes

• Disconnect power before servicing the rack area.
• Pull the lower rack out; swap one assembly at a time to match left/right orientation.
• Fully seat tabs/locks on each carrier; verify wheels roll freely.
• Best practice: replace all four together for even tracking, then run a quick test cycle.

The Diverter Valve Assembly is an OEM part for GE dishwashers. This component controls the flow of water to different parts of the dishwasher, ensuring that the water is directed to the appropriate spray arms for effective cleaning.

You should replace this diverter valve assembly if it becomes faulty or malfunctions. Common causes of a bad diverter valve include wear and tear over time, clogging from debris or hard water deposits, or failure of internal components due to electrical issues.

Symptoms of a bad diverter valve assembly include:

• Inconsistent or poor cleaning performance
• Unusual noises during the wash cycle
• Water not reaching certain spray arms
• Error codes related to water flow issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Pressure Sensor Assembly is an OEM part for GE dishwashers. It monitors the water level within the dishwasher, ensuring the correct amount of water is used during each wash cycle for optimal cleaning performance.

Causes of a bad pressure sensor assembly can include wear and tear over time, clogs or debris obstructing the sensor, electrical issues, or damage to the sensor housing. Malfunctioning sensors can result from exposure to hard water minerals or detergent residues that affect the sensor's accuracy.

Symptoms of a bad pressure sensor assembly include:

• Dishwasher not filling with water properly
• Overfilling or underfilling with water
• Error codes related to water levels
• Dishes not being cleaned effectively

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.

Symptoms of needing to replace the lower rack roller include:

• Difficulty in sliding the lower rack in or out
• Excessive noise or grinding during rack movement
• The rack becoming stuck or not rolling smoothly
• Visible wear, cracks, or damage to the roller itself

Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Silverware Basket Assembly is an OEM replacement part for GE dishwashers. It is a specialized basket designed to hold and secure utensils, flatware, and other small items during the dishwashing cycle. It is important to note that if your original basket was a 3-piece design, the manufacturer has updated this part to a more convenient 1-piece design

Symptoms of a need to replace the silverware basket assembly:

• Cracks, breaks, or damage to the basket structure
• Missing or detached components, such as separators or handles
• Rust or corrosion on metal parts, affecting functionality and appearance

Causes of a faulty silverware basket assembly can include general wear and tear, exposure to high temperatures or harsh detergents, and accidental impact or mishandling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

The Water Inlet Valve is an OEM part for GE dishwashers. This part controls the flow of water into the dishwasher. It opens and closes to allow water from the home's supply to enter the dishwasher at the correct times during the washing cycle.

Causes of a bad water inlet valve include wear and tear from regular use, sediment buildup from hard water, or mechanical failure of the valve components.

Symptoms of a bad Water Inlet Valve include:

• Dishwasher not filling with water
• Water filling too slowly or not stopping once the dishwasher is full
• Leaks detected around the valve area
• Unusual noises coming from the valve during the fill cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.