Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Maytag Dryer Parts

Best Seller
Maytag Dryer Thermal Fuse
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3392519

Stop dryer downtime in its tracks — install the Whirlpool WP3392519 OEM Thermal Fuse in minutes.

OEM Quality Fast 1–2 Day Shipping* Free Tech Help

Why choose this fuse?

  • Guaranteed OEM: built by Whirlpool to Whirlpool specs — no risky aftermarket clones.
  • Broad compatibility: works with Whirlpool, Kenmore, Maytag, KitchenAid, Roper & more.
  • Quick delivery: over 94 % of APP orders arrive in 2 days or less.

Fixes these common dryer problems

Problem How the fuse is involved
Dryer won’t start Blown fuse interrupts motor circuit
No heat / not enough heat Heater circuit disabled for safety
Cycle ends early Over-temp trip stops cycle
Control panel dead Power to controls interrupted


4-step DIY installation (≈10 min)

  1. Unplug dryer and remove rear panel.
  2. Locate thermal fuse on blower housing.
  3. Transfer wires; secure new fuse with ¼-inch nut-driver.
  4. Clean the vent & lint path before testing to prevent repeat failure.

*Video tutorial below.

Ready to get heat back?
Click Add to Cart now & enjoy industry-leading 1–2 day delivery on

This part fixes the following symptoms
  • Won't start
  • Timer will not advance
  • No heat or not enough heat
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You No heat   Dennis G. • Kearny , NJ • January 14, 2017

I did the recommended checks of parts as listed on the website. I would recommend as one other person did but I did not listen the first time and that is to check all the parts don't stop at the first part you find bad. As I had to make two orders paying shipping twice because I thought I found a bad part when testing the igniter but the thermal fuse was also bad and since in a different part of the machine I did not take the time to check it, bad mistake. Also one tool mentioned in the video... Read more

More
$17.95
Compare At:
$21.54
You Save:
$3.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Repair Kit – Oem Belt, 4 Rollers & Idler For 27" Models
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392067

Silence the squeaks and keep laundry moving - upgrade your dryer with the Whirlpool 4392067 OEM Repair Kit.

Why choose this kit?

  • All-in-one fix: OEM belt 661570V, 4 heavy-duty rollers WPW10314173, idler pulley 279640, tri-rings & washer - everything factory-fresh in one box.
  • Wide compatibility: Fits 27" Whirlpool-family dryers—Cabrio, Duet, Bravos XL, Thin Twin, Kenmore 110-series, Maytag, Roper, Estate & more.
  • Pro-grade durability: Roller bearings & reinforced belt deliver whisper-quiet tumbling and longer service life.

 

Fixes these common dryer problems

Problem How the kit solves it
Loud squeaking / thumping Worn rollers or idler pulley replaced
Drum won’t turn Broken or stretched belt replaced
Extended dry times Restores proper drum speed & airflow
Burning-rubber smell New belt & pulley eliminate slippage

 

DIY install in about 45 minutes

  1. Unplug dryer and remove front panel.
  2. Lift drum to release belt; remove old rollers & idler.
  3. Install new rollers, pulley & belt following the routing diagram.
  4. Re-assemble, run test cycle - enjoy quiet, smooth tumbling.

 

Note: Belt may differ from your dryer's model—Double-check compatibility before purchase. 

This part fixes the following symptoms
  • Will not tumble
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Very loud squeak inside whirlpool duet sport dryer model wed8300sw0   Steve W. • Boone , NC • September 27, 2014

Our Whirlpool Duet Sport Dryer, 6.7 cu. ft, Model WED8300SW0, bought new 8 years ago (2006), developed a VERY loud squeaking noise inside the dryer. Removing the top panel did not isolate the problem. I researched the problem and through the videos appearing on Appliance Parts Pros (APP) website and a few others, determined that the problem was either the drum belt, one or more of the 4 drum support rollers, or idler pulley or any combination of these. I ordered the kit to allow for... Read more

More
$37.65
Compare At:
$47.83
You Save:
$10.18

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Drum Belt 92-1/4" 4-Rib
Genuine Whirlpool part
By: Whirlpool
Part Number: 341241

Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.

Why this belt?

  • Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
  • Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
  • Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.

Fixes these common dryer problems

Problem How the belt solves it
Drum won’t turn Transfers motor rotation to drum
Loud squealing / thumping Replaces stretched or frayed belt
Burning-rubber smell New belt stops slippage & heat build-up
Damp clothes / long cycles Restores correct drum speed & airflow


DIY install — about 15 minutes

  1. Unplug dryer; remove lint screen housing & front panel.
  2. Release belt tension at idler pulley; lift drum slightly to slide old belt off.
  3. Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
  4. Re-assemble, run test cycle - enjoy quiet, consistent tumbling.

This part fixes the following symptoms
  • Heat stays on after drum has stopped
  • Will not tumble
  • Touchpad does not respond
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Broken dryer belt   Bob B. • St Louis , MO • September 12, 2015

Unpluged dryer first. Then took the lint filter out and removed the two philips screws inside the lint filter lid. Then take a paint scraper just under the top of the dryer two inches from the left front corner and pushed in a little to release the snap connector and did the same on the right side. Then lifted top over. Then take a 5/16 socket or nut driver and remove the two screws on on the left inside panel, then the right side. Lean front out a little and remove the two wires one the back... Read more

More
$14.64
Compare At:
$17.42
You Save:
$2.78

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: 279838

Restore full heat and end long dry cycles - install the Whirlpool OEM Dryer Heating Element.

Why this heating element?

  • Factory-spec 5400 W / 240 V heating element with nickel-chromium coil - built by Whirlpool to Whirlpool OEM standards.
  • Broad compatibility: fits Whirlpool, Kenmore 110-series, Roper, Estate, Amana, Maytag & more 27-inch dryers.
  • Built to last: high-temp terminals & mica insulation resist fatigue and hotspots.

Fixes these common dryer problems

Problem How the element solves it
No heat / cold drum Replaces burned-out coil to restore heating circuit
Takes forever to dry Full wattage brings drum back to target temperature
Stops mid-cycle Prevents over-cycling caused by faulty element
Burning smell New coil eliminates hot-spot arcing & insulation burn


DIY install — about 20 minutes

  1. Unplug dryer and remove back panel to access heater housing.
  2. Disconnect wires; remove housing screws and slide assembly out.
  3. Swap old element for new, re-use hi-limit thermostat if still good.
  4. Re-assemble, run test cycle - enjoy fast, even drying.

This part fixes the following symptoms
  • No heat or not enough heat
  • Doesn't shut off
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hot   Michael M. • Brunswick , GA • November 04, 2015

After 22 years my Kenmore (Whirlpool) dryer stopped getting hot. So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat. Here is a rundown of what I did and how long it took: • Taking the back off and vacuum <1 minute • Finding the components (from the... Read more

More
$53.95
Compare At:
$64.74
You Save:
$10.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Cycling Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387134

This Dryer Cycling Thermostat is an OEM replacement part for Whirlpool dryers. It monitors internal temperatures and cycles power to the heating element accordingly. The thermostat ensures the drying air reaches and maintains the optimal heat level selected for fast, effective drying results.

Symptoms of a bad cycling thermostat include:

  • The dryer not heating or heating inconsistently  
  • Frequent trips of the circuit breaker
  • Slower than normal drying times
  • Burned clothes due to overheating

Causes of failure may be related to normal wear over time, dust buildup affecting sensor readings, or incorrect thermostat calibration. 

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Too hot
  • Timer will not advance
  • Takes too long to dry
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hot   Michael M. • Brunswick , GA • November 04, 2015

After 22 years my Kenmore (Whirlpool) dryer stopped getting hot. So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat. Here is a rundown of what I did and how long it took: • Taking the back off and vacuum <1 minute • Finding the components (from the... Read more

More
$26.95
Compare At:
$32.34
You Save:
$5.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Rear Drum Support Roller Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 349241T

The Dryer Rear Drum Support Roller Kit is an OEM replacement part for  Whirlpool dryers, as well as Kenmore, Samsung and other brands. This kit includes the rear support rollers that are crucial for maintaining proper drum alignment and smooth rotation during the drying cycle. Matching belt 341241 and idler pulley WP691366.

Symptoms of a faulty Rear Drum Support Roller Kit include:

  • Excessive vibration or shaking during drying cycles
  • Loud grinding or squeaking noises from the rear of the dryer
  • Uneven wear or visible damage to the rollers
  • Potential drum misalignment, rubbing against the drum casing, or leaks

Causes of a bad Rear Drum Support Roller Kit can include wear and tear over time, excessive load imbalances, or physical damage from impact or mishandling.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models. 

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Thumping/vibrating/rattling pretty bad fixed 100%!   Doug P. • Durham , NC • November 15, 2015

I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a... Read more

More
$17.74
Compare At:
$21.29
You Save:
$3.55

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Heating Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387747

The Dryer Heating Element is an OEM replacement part for Whirlpool dryers. It is responsible for generating the heat necessary for the drying process, ensuring clothes and fabrics are thoroughly dried.

Symptoms of a bad dryer heating element include:

  • Clothes coming out damp or taking excessive time to dry
  • No heat or insufficient heat produced during the drying cycle  
  • Visible signs of damage or burnout on the heating element itself
  • Unusual burning smells emanating from the dryer

Causes of a faulty heating element can include normal wear over time, electrical issues, or physical damage from impact or overloading.  

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms
  • No heat or not enough heat
  • Takes too long to dry
  • Too hot
See more...
Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer   Bobbie M. • King George , VA • October 06, 2017

I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer. Started by ordering a thermal fuse because it was... Read more

More
$55.95
Compare At:
$86.67
You Save:
$30.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Gas Valve Coil Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279834

The Dryer Gas Valve Coil Kit is an OEM replacement part for Whirlpool dryers, as well as Kenmore and Samsung dryers. It is a set of coils that control the flow of gas fuel to the burner. The gas valve regulates the precise amount of gas needed to properly combust and generate heat for drying clothes. 

Causes of a bad gas valve coil can be wear and tear from regular use, lime or mineral buildup on the coils over time, or physical damage to the coils.

Symptoms of a bad gas valve coil kit include:

  • Inconsistent or incomplete drying  
  • Slow or intermittent drying
  • Burning smell from the gas dryer
  • Improper burner ignition or non-ignition

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Timer will not advance
  • No heat or not enough heat
  • Shuts off too soon
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Flame to dry clothes would go out after about a minute and wouldn't reignite   Wendell M. • Brown Deer , WI • June 19, 2014

I'm starting with a quick background on my dryer. About 18 months ago the belt on the dryer started slipping and squealing. I had a can of belt dressing spray so I popped the top open and sprayed the belt. It actually worked for about a year before it started squealing again. For the next 6 months I had to spray it more and more often. Then the clothes stopped drying. Obviously, at this point, I had to get off my lazy ass and fix the dryer. Searched my dryer's model number on the internet and... Read more

More
$27.21
Compare At:
$32.11
You Save:
$4.90

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Repair Kit (Most 29 Inch Large Capacity Models)
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392065

The Dryer Repair Kit is an OEM replacement part for Whirlpool 29-inch large capacity dryer models. It is a kit designed to provide various essential components and hardware needed for common dryer repairs or maintenance tasks.

The kit includes:

Please note: Some parts in this kit may not fit your specific model. Use your model number to check for your specific parts.

Causes of needing a dryer repair kit can include worn-out or damaged components due to normal wear and tear, accidental impact or mishandling, or maintenance requirements after a certain period of use.

Symptoms that may indicate the need for a dryer repair kit include:

  • Excessive noise or vibrations during operation
  • Difficulty in opening or closing the dryer door
  • Clothes becoming tangled or wrapped around the drum
  • Leaks or air drafts affecting drying performance

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms
  • Will not tumble
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Dryer belt burned up due to wedged sneaker   Benjamin E. • Marietta , GA • September 30, 2014

I was out of the country when the damage occurred but based on my wife's description I knew what had happened. Upon returning to the 1st World, i verified a totally free-spinning drum and ordered a full rebuild kit (rollers, belt & idler). The instruction video was very helpful - especially in listing every single tool needed so i only made one trip to the workshop and brought up exactly what i needed, the first time. Everything went pretty much according to the instructions except that... Read more

More
$34.49
Compare At:
$48.30
You Save:
$13.81

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Thermal Cut-Off Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279816

This dryer thermal cut-off kit is an authentic OEM replacement part for Whirlpool and Kenmore dryers. It is designed to prevent the dryer from overheating.

This Kit Includes:

  • High Limit Thermostat (250°F Limit)
  • A Cut Off Fuse (309°F Limit)
  • Female Spade Terminals
  • Jumper Wires

Over time, these components can fail due to electrical issues, lint buildup blocking the exhaust vent, or normal wear and tear. A malfunctioning thermal cut-off kit can result in overheating, which can pose a safety hazard and affect the dryer’s performance.

Symptoms of a bad Thermal Cut-Off Kit include:

  • Dryer not heating
  • Dryer overheating
  • Dryer shutting off mid-cycle
  • No response when attempting to start the dryer

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Timer will not advance
  • No heat or not enough heat
  • Too hot
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hot   Michael M. • Brunswick , GA • November 04, 2015

After 22 years my Kenmore (Whirlpool) dryer stopped getting hot. So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat. Here is a rundown of what I did and how long it took: • Taking the back off and vacuum <1 minute • Finding the components (from the... Read more

More
$45.95
Compare At:
$55.14
You Save:
$9.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Idler Pulley Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: W10837240

The Idler Pulley Assembly is an OEM part compatible with Whirlpool dryers. It is a crucial component of the dryer's drive system, responsible for maintaining proper tension and alignment of the belt that drives the dryer drum. Measuring 5.5 x 3.5 x 3 inches, this idler pulley assembly typically consists of a pulley mounted on a bracket or arm, which can pivot or move to apply the necessary tension to the belt.

Symptoms of a faulty Idler Pulley Assembly include:

  • Loud squeaking or grinding noises during operation
  • The dryer drum not spinning or rotating properly
  • Excessive vibrations or shaking during the drying cycle
  • Visible wear or damage to the belt or pulley components

Causes of a bad idler pulley assembly can include bearing failure, physical damage from foreign objects, or normal wear and tear over time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

Do-It-Yourself Stories from Customers like You The idler pulley was squeaking   Bob C. • Fall River , MA • June 12, 2014

I bought the new arm assembly because after a few times of going in through the front of the machine and reaching in the back under the drum I could get to the pulley, so I took it off of the arm and lubed it and then replaced it back inside, put the belt back on and it was good for a week or so , then started squeaking again. So after doing this about 6 times I got the impression that is was the wheel and shaft on the arm were worn out causing the wheel to wobble and wear the arm. I then... Read more

More
$26.95
Compare At:
$32.34
You Save:
$5.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406107

The Dryer Door Switch is an OEM replacement part for Whirlpool dryers. It is a crucial safety component that monitors the opening and closing of the dryer door, preventing the dryer from operating when the door is open.

Symptoms of a faulty Dryer Door Switch include:

  • The dryer failing to start or operate with the door closed
  • The dryer continuing to run or heat even when the door is open
  • Error codes or warning lights related to the door switch sensor

Causes of a bad door switch can include normal wear and tear over time, physical damage from mishandling or impact, or electrical malfunctions.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms
  • Doesn't shut off
  • Won't start
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You Ignitor coil was not turning on   Harrison N. • El Cajon , CA • March 14, 2021

I realized my load of laundry was still wet after a normal drying cycle. My first action was to turn the dryer on (2010 gas Maytag centennial) and open the front port to look at the ignitor coil. It never turned orange so I knew there must be a problem with the primary circuit. I shut off the dryer, disconnected the power, pulled it away from the wall, shutoff the gas, and removed the back panel. I then disconnected the wires for the thermal fuse and checked its resistance with a multimeter.... Read more

More
$26.95
Compare At:
$31.80
You Save:
$4.85

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Drum Support Roller
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001541

The Drum Support Roller is an OEM replacement part for Whirlpool dryers that is responsible for supporting the drum and allowing it to rotate smoothly. Causes of a bad Drum Support Roller can include lint and debris that accumulates and causes the rollers to malfunction or seize.

Causes of bad Drum Support Rollers can include wear and tear over time, excessive load imbalances, or physical damage from impact or mishandling.

Symptoms of a bad Drum Support Roller include:

  • Unusual noises, such as thumping or squealing.
  • The dryer drum struggling to rotate or not turning smoothly.
  • Increased vibration or shaking of the dryer during operation.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Dryer squealing on startup   Sandy R. • Manhattan , KS • September 08, 2015

I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things... Read more

More
$20.95
Compare At:
$30.18
You Save:
$9.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Idler Pulley
Genuine Whirlpool part
By: Whirlpool
Part Number: WP691366

The Idler Pulley is an OEM part for Whirlpool dryers, responsible for maintaining the correct tension on the drive belt, allowing it to remain tight and aligned, preventing slipping and contributing to the consistent rotation of the drum during cycles.  

Symptoms of a bad Idler Pulley include:

  • Squealing or squeaking noises  
  • The dryer drum failing to turn 
  • Excessive vibration or unusual sounds 

Causes of failure can range from normal wear and tear, which can lead to the pulley's bearing wearing out, to the accumulation of lint and debris causing the pulley to seize or function improperly. Additionally, a cracked or damaged pulley can lead to belt misalignment and slippage.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Fits all Whirlpool-made dryers (Whirlpool, Kenmore with prefix 110, Roper, KitchenAid, and Estate). Matching belt 341241 and rear support rollers 349241T. Whirlpool dryer repair manual 677818L.

This part fixes the following symptoms
  • Will not tumble
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Thumping/vibrating/rattling pretty bad fixed 100%!   Doug P. • Durham , NC • November 15, 2015

I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a... Read more

More
$15.65
Compare At:
$18.78
You Save:
$3.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Thermistor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577274

The Thermistor is an OEM part for Whirlpool brand dryers. It is a temperature-sensing resistor that monitors air temperature changes during the drying cycle. The thermistor provides feedback to the control board on heating element performance and internal air condition. 

Symptoms of a failed thermistor include:

  • Inaccurate temperature readings and selections  
  • Improper or incomplete drying
  • Safety issues from overheating due to lack of feedback
  • Error codes displayed on the control panel

Causes can be related to normal wear and environmental exposure over time. Failure prevents the dryer from achieving optimal drying conditions.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Too hot
  • Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer   Bobbie M. • King George , VA • October 06, 2017

I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer. Started by ordering a thermal fuse because it was... Read more

More
$35.58
Compare At:
$41.98
You Save:
$6.40

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Igniter Kit And Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: 279311

The Igniter Kit and Bracket is an OEM replacement part for Whirlpool dryers. It is a kit that includes the igniter and bracket assembly, which work together to ignite the gas or electric heating element. 

Causes of a bad igniter and bracket can include failure due to prolonged or repeated use, damage from impact or mishandling, or failure of integrated electronic components. 

Symptoms of a bad igniter and bracket include: 

  • The dryer not heating or heating intermittently
  • Repeated trips of the thermal fuse 
  • Smell of gas indicating improper ignition
  • Visible damage or cracks in the igniter or bracket

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes   Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

More
$35.58
Compare At:
$42.70
You Save:
$7.12

IN STOCK
Ships Today Guaranteed
Add to Cart

When it comes to keeping your laundry routine smooth and efficient, Maytag dryer replacement parts are essential. These parts play a vital role in maintaining the performance and longevity of your dryer, ensuring your clothes come out perfectly dry every time.

Maytag dryers are known for their durability and reliability, but even the best appliances need care. That's where Maytag dryer parts come into play. Whether it's a new drum belt, heating element, or lint filter, each part contributes to the overall functionality of your dryer. Quality replacement parts can restore your appliance to peak performance, saving you time and hassle in the long run.

Opting for OEM replacement parts means you're choosing components specifically designed for your Maytag dryer. These parts guarantee a perfect fit and seamless compatibility, so you can trust that your dryer will work just as it should. The precision and quality of OEM parts ensure that your dryer maintains its efficiency and extends its lifespan.

With a wide range of Maytag dryer replacement parts readily available, you can feel confident that you'll find exactly what you need. Whether you're performing routine maintenance or making necessary repairs, these parts will help keep your dryer running smoothly and efficiently. It's all about ensuring your household appliance continues to be a reliable part of your daily life.

More

Related Parts

Maytag Dryer Accessories Parts Maytag Dryer Adhesive Parts Maytag Dryer Axle, Roller, Pulley Maytag Dryer Baffle Maytag Dryer Bearing Maytag Dryer Belt Maytag Dryer Blower Wheel Or Fan Blade Maytag Dryer Bracket & Flange Parts Maytag Dryer Bumper, Bushing, Grommet Parts Maytag Dryer Burner & Related Maytag Dryer Buzzer Or Chime Parts Maytag Dryer Cable Or Retainer Parts Maytag Dryer Cap Or Cover Parts Maytag Dryer Capacitor Parts Maytag Dryer Chassis Or Cabinet Parts Maytag Dryer Clip Or Clamp Maytag Dryer Control Board Maytag Dryer Coupling Or Cam Parts Maytag Dryer Door, Door Glass & Parts Parts Maytag Dryer Drum, Bulkhead, Front Parts Maytag Dryer Duct Parts Maytag Dryer Endcap Parts Maytag Dryer Filter Maytag Dryer Fuse Or Sensor Maytag Dryer Gas Conv Kit Parts Maytag Dryer Gasket & Seal Maytag Dryer Guard, Shield, Barrier Parts Maytag Dryer Guide Parts Maytag Dryer Handle Maytag Dryer Heating Element Maytag Dryer Hinge Parts Maytag Dryer Housing Or Cover Parts Maytag Dryer Igniter Maytag Dryer Insulation, Sound Dampening Parts Maytag Dryer Knob, Dial & Button Maytag Dryer Latch, Catch, Lock Maytag Dryer Leg Or Foot Maytag Dryer Lens & Related Parts Maytag Dryer Lever Parts Maytag Dryer Light, Bulb, Lamp Parts Maytag Dryer Manual, Care Guide Parts Maytag Dryer Motor Maytag Dryer Nameplate, Faceplate Parts Maytag Dryer Nozzle Parts Maytag Dryer Paint Parts Maytag Dryer Panel Parts Maytag Dryer Pipe Or Manifold Parts Maytag Dryer Plug Or Insert Parts Maytag Dryer Rack Or Shelf Parts Maytag Dryer Screws, Nuts, Washers Maytag Dryer Shaft Or Pin Parts Maytag Dryer Spring Parts Maytag Dryer Support Parts Maytag Dryer Suppression Parts Maytag Dryer Switch Maytag Dryer Terminal Block, Receptacle Parts Maytag Dryer Tool Parts Maytag Dryer Touch Pad Parts Maytag Dryer Transformer Parts Maytag Dryer Wire, Harness, Power Cord Parts
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store