Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement spring for the flapper between French refrigerator doors. Installs in the lower hinge to close the gap automatically. Needed when broken or missing.
I thought fixing this door would be too difficult/expensive, so I just spent a week manually closing the flap myself each time I closed the frig. Then I googled the model number of the frig just for fun. The first result was AppliancePartsPros.com, I clicked ONE SINGLE TIME and I arrived at this site, with the exact part I needed listed at the top, and a repair tutorial video that played beautifully with one more click. In the span of two total clicks, I saw how to fix the frig, and I saw... Read more
Spring sleeve for French door refrigerators. Installs in the left door to support the automatic mullion flap mechanism. Replace if cracked or missing.
Ice maker stopped working or making loud popping sounds? This assembly restores ice production. DIY-friendly repair—just unscrew, unplug, and swap.
Since I could not find the correct thermistor from the schematic provided, I ordered the thermistor harness for the evaporator. I cut the harness and spliced it to the sheared thermistor wires on the roof of the freezer compartment. It now works fine with a little "farmer ingenuity" help. Samsung was absolutely no help at all, but the guy that I spoke with over the phone at APP sure was. This site is now my "go to" for appliance parts! Tip for others with this model. Do not overfill the upper... Read more
If your refrigerator has ice buildup on coils or water under crisper drawers, the defrost thermostat may have failed. DIY-friendly repair part.
Poped off plastics caseing inside the frigerator. Unscrewed 4 screws holding black fan inplace. Followed yellow wire to locate white sensor. Need to be careful not to break styrofoam, don't force it, it should seporate from plastic easy as long as the 4 screws are out. Swap it for the new one and button it back up. While I was in there I replaced the defrost sensor and the other sensor next to the heating rod. Also I know there is an issue with drain hole plugging up with ice so I extended the... Read more
The Refrigerator French Door Hinge is designed to ensure smooth and reliable operation for your Samsung French door refrigerator. This genuine OEM part guarantees a perfect fit, maintaining the integrity and functionality of your appliance. Crafted with durability in mind, the hinge supports the weight of your refrigerator doors, allowing them to open and close effortlessly while staying properly aligned. By replacing a damaged or worn hinge with this high-quality component, you can prevent doors from sagging or leaking, ensuring your refrigerator maintains the optimal temperature for your food storage. Easy to install, the Refrigerator French Door Hinge is compatible with a variety of Samsung refrigerator models, providing a seamless integration that restores your appliance to its best performance. Investing in this genuine OEM part not only extends the lifespan of your refrigerator but also enhances the overall user experience by delivering consistent and dependable door functionality.
This is a plastic cover that shields the heater element located near the french door center hinge area of the refrigerator. It protects the defrost or anti-condensation heater wiring and components from moisture and physical damage. Replace this cover if it is cracked, warped, or missing, which can lead to condensation buildup or frost accumulation around the french door section.
I ordered the French door housing, the new piece has a solid raised curved part that enters the guide, and a new center hinge. I watched both repair videos shown on appliance parts Pro. It looked pretty simple, so I got my 2 screw drivers and unplugged the refrigerator and started. The hardest part was removing the upper and lower hinges. The video didn’t show how he got them loose, after several minutes of frustration I figured out how to release the hinge. The new parts installed really... Read more
Ice overflowing the bin? A broken ice maker shut off arm can't detect full ice levels. Simple DIY fix with one Phillips screw. Video guide included.
I heard a cracking sound so I opened the freezer again and found that it was s piece of plastic -- a small bar -- that had broken off of something. I went online, first to identify the broken part. It was the ice guide. I had to do a bit more research to find out what the ice guide does, as well as the part number. I found it easily on appliancepartspros.com. (I think I purchased a new heating element for my electric oven from you and was able to fix it VERY easily. I was hoping this new repair... Read more
Fix freezer ice buildup & fridge not cooling. This temperature sensor regulates cooling cycles. DIY-friendly repair, takes about 45 minutes to install.
Replaced the inside back panel which comes with a new fan. Seems the old fan had stopped working due to ice which burned it out. The drain tube was blocked and ice built up on the bottom plate. Using a basting tube from Walmart and hot water I thawed out the ice in the tube. The basting tube became much like a toilet plunger and cleared the line rapidly. Nothing else worked as fast. I then bought a one foot long piece of thin solid copper wire from Lowes and stripped the insulation off. I... Read more
The Refrigerator Ice Cube Tray is an essential component for maintaining a steady supply of ice in your Samsung refrigerator. Crafted as a genuine OEM part, it ensures perfect compatibility and seamless integration with your appliance. This durable ice cube tray is designed to produce uniform ice cubes, enhancing your drinking and food preservation experience. Its high-quality materials guarantee longevity and reliable performance, reducing the need for frequent replacements. Installing the Refrigerator Ice Cube Tray is straightforward, allowing you to quickly restore your freezerGÇÖs functionality without hassle. Whether your original tray is cracked, warped, or no longer functioning properly, this genuine OEM part provides a dependable solution to keep your ice production consistent. Enhance your refrigeratorGÇÖs performance and enjoy the convenience of fresh ice cubes daily with this expertly designed ice cube tray, tailored to meet the standards of Samsung appliances.
The amount of water being dispensed into the ice cube tray was excessive, causing overflow of the tray. The water then ran into the collection bin and even down the side walls of the freezer creating a huge block of ice in the bin, and ice all over the lower shelves as well. The excessive build up of ice caused the cube tray to crack and also split the little silicone water grommet that connects to the water delivery tube which directs water into the cube tray. Look out for that little tube... Read more
Seals the refrigerator door to keep cold air in and prevent condensation. Replace when cracked, torn, or not sealing properly. Confirm fit by model.
First, I removed the old gaskets, which was a very easy task since they are held in the doors by rubber beads in recessed slots. I installed the new right door gasket in less than 10 minutes by gradually pushing the retainer bead into the door recessed slot with finger pressure until it was seated properly. The left door bead was somewhat more difficult to install into the bead slot, because the recessed bead slot is covered by a hinged flap on its left edge that doesn't permit easy access.... Read more
This is a thermistor-style temperature sensor that monitors the internal temperature of the refrigerator compartment and sends readings to the control board. The control board uses this data to regulate the compressor and defrost cycles. Replace this sensor if the refrigerator is too warm, too cold, runs constantly, or displays error codes related to temperature sensing.
I replaced all three sensors behind the Defroster cover since I was not able to test them. Problem solved. Read more
This is a mounting screw used to secure the door handle to the refrigerator door. It threads into the handle bracket to keep the handle firmly attached. Replace this screw if the door handle feels loose, wobbles, or if the original screw is stripped or missing.
Replaced broken handle support bracket (part #AP5620448) and cap (part #AP5620751). Used a phillips head screwdriver and allen wrench. Pliers also came in very handy. If replacing cap and support bracket, be sure to install cap before support bracket, otherwise you'll have trouble installing the cap. I ended up not needing to replace the fixer handle (part #AP4372038), but I'll keep it around just in case. Read more
The Refrigerator Sensor Cover is an essential component for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part is designed to protect the sensor, ensuring accurate temperature readings and efficient operation of your appliance. Constructed with high-quality materials, the Sensor Cover provides durability and a perfect fit for a range of Samsung refrigerator models. By safeguarding the sensor from dust, spills, and everyday wear, this cover helps extend the lifespan of your refrigeratorGÇÖs sensitive components. Installing the Refrigerator Sensor Cover is straightforward, allowing you to restore your fridgeGÇÖs functionality quickly and easily. Whether you need to replace a cracked, missing, or damaged cover, this genuine OEM part guarantees reliable performance and compatibility. Enhance your refrigeratorGÇÖs efficiency and maintain a consistent cooling environment with the Refrigerator Sensor Cover , ensuring your food stays fresh and your appliance operates smoothly.
Samsung refrrigerator. it started when the setting was on cubes but was putting out crushed ice. then months later the water refill was running down into the ice bucket causing a massive block of ice in the bucket. look closely at the first two or three cubes in the ice tray after they unload. mine were not dumping and staying in the tray. when the water refill kicked on it would overfill the tray (because of the leftover cubes remaining in the tray) and would run down into the ice bucket... Read more
Securely houses your refrigerator's water filter for clean, purified water. Replace if leaking after filter changes or cracked from wear. Confirm fit by model.
After looking online and discovering that others who had used a knockoff brand filter to "save money" had the same problem, I concluded the only solution was to replace the filter housing. Found the one I needed on AppliancePartsPros.com. Most important to me was the video explaining how to replace the filter housing - it made the task a snap to complete. The price was also competitive with other sources. Shipping was half that charged by Samsung. Not only was it cheaper, but it was also super... Read more
Flipper assembly that installs vertically on the French door liner to seal the center gap. Replace if cracked, broken, or no longer closing properly.
Looked at new part and realized there were only 2 screws that held the flap onto the door. Removed 2 caps off of screws with small knife and saved them. Removed 2 screws and the flap fell off into my hands. Disconnected wire harness. Connected wire harness for new flap and carefully pushed harness back into recess in door. Put screws back with caps. Closed the door to test and another wonderful job completed by homeowner! Read more
Seals your freezer door to maintain temperature and prevent air leaks. Replace if torn, worn, or moldy. Confirm fit with your model number.
I looked up my fridge on AppliancePartsPros.com and easily identified the parts I needed (2 door gaskets and 1 freezer gasket). Ordered them on Friday to be sent standard mail and all seals arrived on Saturday. I was thrilled and within 15 minutes my seals were replaced and working perfectly. Thanks so much having a user friendly website and speedy service. I will definitely use you again and recommend you highly. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.