Basket, Silverware Basket

This replacement cutlery basket is a single plastic basket that holds forks, knives and spoons securely in your dishwasher rack so small items stay upright and contained for better cleaning and safer unloading. What it does:

• Holds and separates silverware and small utensils during the wash cycle
• Keeps cutlery upright so water and detergent reach all surfaces
• Prevents small items from falling through the rack or collecting in the tub
• Replaces broken, cracked or missing baskets to restore safe storage

• Remove the lower rack to slide the basket into place; no special tools usually required
• Position the basket so it snaps or rests securely in the rack slots
• Check for sharp or damaged edges on cutlery before loading to avoid basket wear
• Keep basket away from direct contact with the heating element and high-heat drying surfaces

The Silverware Basket is an OEM component specifically designed for Whirlpool dishwashers. Located at the bottom of the dishwasher, the silverware basket provides an isolated space for washing smaller silverware and utensils. 

The silverware basket is constructed of durable plastic coated with a non-slip material on the bottom. It features folded edges and reinforced sides to securely hold silverware in place during the washing cycle. Partitions and prongs within the basket help separate pieces and prevent tangling.

Symptoms of a bad silverware basket include:

• Silverware escaping from the basket during the wash cycle 
• Damage, cracks, or loose pieces on the basket
• Missing partitions or prongs

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replace a damaged lower-rack silverware basket to keep forks, knives and spoons organized and secure during dishwasher cycles. This OEM-style cutlery basket restores proper utensil spacing for more consistent cleaning and easier unloading. What it does:

• Holds silverware and small utensils upright in the dishwasher lower rack for improved wash coverage
• Keeps utensils separated to reduce nesting and help water reach all surfaces
• Prevents loose cutlery from falling through the rack and blocking spray arms
• Commonly replaced when the basket is cracked, missing sections, or no longer holds utensils securely

• Remove the lower rack, lift out the old basket and set the replacement into the same position
• No special tools typically required; verify the basket snaps or sits securely in the rack
• Handle sharp utensils carefully during removal/installation
• If rack rails or holders are damaged, inspect those components separately before completing the install

This replacement silverware basket holds forks, knives and spoons securely during dishwasher cycles so utensils come out separated for better cleaning and easier unloading. Durable plastic construction designed for direct fit replacements. What it does:

• Keeps silverware organized and upright for improved water flow and cleaning
• Prevents small items from falling to the bottom of the tub or blocking spray arms
• Helps protect utensils from contact with larger dishes and racks
• Restores a missing, cracked or damaged utensil basket so loading is safer and neater

• One silverware basket

• Fits into the lower rack; simply drop into place and ensure it sits level
• Remove power or run an empty rinse cycle before working in the dishwasher for safety
• Inspect rack wheels and clips for damage before reinstalling; do not force into a warped rack
• Avoid overfilling to prevent bending or cracking

This door basket mounts to the inside of the refrigerator door to hold bottles, jars, and condiments. Replace a cracked or missing bin to restore secure, convenient door storage and keep items from tipping when the door opens and closes. What it does:

• Provides door-mounted shelf space for small items and containers
• Keeps items from falling when opening/closing the door
• Replaces a broken, warped, or missing bin to restore proper fit
• Common symptoms: cracked bin, broken locking tabs, bin won't stay seated, items fall out

• 1 door basket

• Disconnect power before servicing
• Remove the old bin and transfer contents
• Align the bin's mounting tabs with the door slots and press firmly until fully seated
• Verify a snug fit and avoid overloading the bin after installation

Color: white. Measures about 3 inches wide by 4 inches high by 10 inches deep.

This replacement silverware basket holds forks, knives and spoons in the dishwasher lower rack so utensils stay upright and separate for better cleaning and easier unloading. It's a direct-fit interior basket designed to restore secure utensil loading. What it does:

• Keeps silverware and small utensils contained so pieces don't fall through or block the spray arms
• Separates items to improve water flow and cleaning coverage
• Prevents loose utensils from banging and potentially damaging dishes
• Replaces cracked, broken, or missing baskets that allow utensils to shift during the cycle

• Drop into the lower rack — no tools required for typical swap-out
• Position basket so it sits flat and does not interfere with rack movement or spray arm rotation
• Avoid overloading; place sharp utensils point-down or bundle separately to reduce hazard when unloading
• For appliance repairs beyond simple replacement, disconnect power and water before servicing

Right-side basket lid for top-load washers. Replaces a cracked or damaged right-side lid to help contain laundry, reduce splashing and restore the basket cover so the washer closes and operates as intended. What it does:

• Covers the right side of the inner wash basket and helps keep clothes from catching on the basket edge.
• Helps reduce water splash and keeps items contained during the wash.
• Restores proper fit and alignment of the basket cover area that may affect lid closing.
• Used when the original right-side lid is cracked, warped, or broken.

• Disconnect power and water supply before beginning service.
• Handle edges carefully; wear gloves to avoid sharp edges on broken parts.
• Installation typically requires removing the outer cabinet or basket access panels and securing the lid with existing fasteners — follow the model's service manual for exact steps.

This replacement left-side lid for the silverware basket restores coverage and helps keep utensils contained during dishwasher cycles. It matches OEM fit and appearance so the basket functions as designed. What it does:

• Covers and secures utensils in the left section of the silverware basket
• Helps prevent small items from shifting or falling through during wash cycles
• Restores proper basket alignment for even water flow and rinsing
• Reduces the chance of utensil contact with rotating spray arms

• Snap-in replacement; no special tools typically required
• Remove the silverware basket to access and align the lid before snapping into place
• Inspect surrounding basket clips/rims for damage and replace if worn to ensure secure fit
• Disconnect power to the appliance and follow the manufacturer's safety instructions before servicing

This clip secures the silverware basket in the dishwasher, keeping the basket stable during cycles so utensils stay contained and clean. Durable plastic construction replaces a broken or lost basket retainer. What it does:

• Clips the silverware basket to the rack to prevent tipping or shifting during wash cycles.
• Restores proper basket alignment so utensils stay positioned for effective cleaning.
• Helps eliminate rattling or knocking noises caused by a loose basket.
• Works as a direct replacement for damaged, cracked, or missing basket retainers.

• One silverware basket holder clip.

• Remove the silverware basket and inspect attachment point; snap the clip into the existing slot until it clicks.
• No special tools typically required; use a flat tool for leverage if the old clip is stuck.
• Handle plastic parts gently to avoid cracking; replace any broken surrounding tabs for a secure fit.
• Disconnect power and ensure the dishwasher is off and racks are stable before working inside the tub.