Bumper, Bushing, Grommet Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10619951
The Refrigerator Drain Tube is an OEM replacement part for Whirlpool refrigerators. It is the tube responsible for draining condensation and any other moisture that collects at the back of the refrigerator compartment. The drain tube guides liquid to the evaporation pan located below the refrigerator to be evaporated.
Symptoms of a bad drain tube include:
- Water collecting in the back of the refrigerator
- Musty odors emanating from the refrigerator
- Water leakage from the bottom of the refrigerator
Causes of a bad drain tube can be blockages from food particles or debris, cracks or leaks that prevent proper drainage, or damage due to impact or kinking of the tube over time.
This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Fridge leaked every 2 3 days. Mark D. • Cumberland , RI • October 19, 2019
The drain tube for for the defrost cycle seemed to be blocked, so I googled the repair & it sent me to AppliancePartsPros. Obviously, there's a design problem with this model since many other people have the same issue. This tube is an upgrade on the original for my KitchenAid model (design flaw). Since installation 4 days ago, I have had no leaks - awesome!
The video for installation of the new tube on AppliancePartsPros was excellent. Two additions to the video:
1) I used a hair dryer...
Read more
More
$41.95
- Compare At:
-
$49.92
- You Save:
-
$7.97
Genuine Ge part
By: Ge
Part Number: WR02X12008
The Fan Motor Grommet is an OEM replacement part for GE refrigerators. This small but essential component serves as a seal and insulator around the area where the fan motor shaft protrudes from the appliance body.
Causes of needing to replace the fan motor grommet can include normal wear and tear over time, exposure to extreme temperatures or moisture, or physical damage due to impact or improper installation.
Symptoms of a faulty or missing grommet include:
- Air leaks or drafts around the fan motor area
- Condensation buildup or frost formation near the motor shaft
- Increased noise or vibration from the fan motor assembly
- Reduced cooling efficiency due to air leakage
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Evaporator fan motor whining keeping me up at night then it sounded like rocks were in it Judy P. • Lakeside , CA • March 30, 2015
It was after 11:00 at night a few nights ago, I couldn't sleep listening to the whining of the fan in the freezer, it was running and making noise sounding like waaoooww, waaaoww. It also sounded like grumbling of a garbage disposal. The refrigerator fan motor was so noisy it was keeping me up all night going on and off running really loud and about to fail. So I was desperate, and called AppliancePartsPros when I couldn't get to sleep near midnight because the fan was so noisy and Bud in...
Read more
More
$7.41
- Compare At:
-
$8.82
- You Save:
-
$1.41
Genuine Ge part
By: Ge
Part Number: WR02X10098
The Evaporator Fan Grommet is an OEM part for GE refrigerators. This component serves as a cushion and stabilizer for the evaporator fan motor, reducing vibrations and noise while ensuring the fan operates smoothly. It helps to secure the fan motor in place, maintaining proper airflow and efficient cooling within the refrigerator.
Common causes of a bad grommet include wear and tear from constant use, damage from excessive vibrations, or degradation of the material over time.
Symptoms of a bad evaporator fan grommet include:
- Increased noise or rattling sounds coming from the fan area
- Vibrations felt within the refrigerator
- The evaporator fan motor becoming loose or misaligned
- Reduced cooling efficiency due to improper fan operation
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Freezer section too warm
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Fan was making noises. Mark M. • Easton , PA • May 15, 2023
My refrigerator's cooling fan was making a noise. It wasn't loud; in fact, it was barely discernible. However, it was just loud enough to annoy me. The fan blade was hitting the shroud every now and then, creating a subtle, yet annoying sound. I'd tried tightening all the screws back there, and it helped-for a while. The noise came back. After looking at the fan motor, I noticed the bushings; it occurred to me that they might be the culprit. And why not? They were the originals installed at the...
Read more
More
$6.53
- Compare At:
-
$8.36
- You Save:
-
$1.83
Genuine Lg part
By: Lg
Part Number: 4984JJ3003A
The Hinge Bushing is an OEM part for LG refrigerators. It serves as a crucial component in the door hinge mechanism, ensuring smooth and stable operation when opening and closing the refrigerator door.
You should replace this hinge bushing if it becomes worn out or damaged. Common causes of a bad hinge bushing include constant use leading to wear and tear, misalignment of the door, or physical damage due to impact.
Symptoms of a bad hinge bushing include:
- Difficulty in opening or closing the door
- The door sagging or not aligning properly
- Unusual noises like squeaking or grinding when the door is moved
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Worn nylon bushing on door Michael K. • Port Charlotte , FL • July 23, 2019
Elderly neighbor charged $100 for factory tech to inform her that the part wasn't available anymore, so I ordered 2 from Appliance Parts Pros.com (one for a spare) and when they arrived a few days later, I installed then in about 20-25 minutes. I had to remove all the food off the door shelf so I could lift the door off the hinge to replace the bushing. That took 5 minutes. Shame on the tech that went by the date of manufacture rather than checks by model and serial number to see if the part...
Read more
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Genuine Ge part
By: Ge
Part Number: WR1X2048
The Slide Bearing is an OEM part for GE refrigerators. This small but crucial component is typically located on the rails of refrigerator drawers, allowing them to slide in and out smoothly without sticking or jamming. The slide bearing helps reduce friction between the drawer and the frame, protecting the refrigerator's structure from wear and tear while ensuring a quieter, more efficient operation.
Symptoms of a failing slide bearing include:
- Drawers becoming difficult to open or close
- Squeaking noises during drawer movement
- Increased resistance or jerking when pulling out the refrigerator drawers
Causes of slide bearing deterioration typically involve accumulation of food particles or debris, general wear from frequent use, or inadequate lubrication leading to increased friction and eventual wear out.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
I had 3 side rails that were broken Ken B. • Brandon , FL • March 09, 2016
The new slides fit perfectly. One thing to mention is that the slide rails come with the slide bearings so you do not need to buy those separate. When I called I was told I needed the bearings so I bought 3 assuming I would be able to salvage the others. Turns out I did not need them.
Read more
More
$12.45
- Compare At:
-
$14.94
- You Save:
-
$2.49
Genuine Ge part
By: Ge
Part Number: WR02X11331
The Fan Motor Grommet is an OEM replacement part for GE refrigerators. It is a small but essential component that helps to seal and insulate the area around the fan motor, preventing air leaks and maintaining optimal cooling efficiency.
Causes of a damaged or worn-out fan motor grommet can include prolonged use, exposure to extreme temperatures, or physical damage from improper handling or installation.
Symptoms of a bad fan motor grommet include:
- Reduced cooling performance
- Increased energy consumption
- Frost buildup in the freezer compartment
- Unusual noises coming from the fan area
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy fan Robert M. W. • Palmetto , FL • October 29, 2016
I had found that the fan in the freezer was making a lot of noise. Turns out the shaft was loose, causing the flan blade to wobble.
Replaced the motor and fan and now it runs like a new unit.
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Bosch part
By: Bosch
Part Number: 00165296
The Hinge Bushing is an OEM component for Bosch dishwasher models. This bushing acts as a guide and support component for the dishwasher door hinge assembly. It facilitates smooth and quiet opening and closing of the door.
Symptoms of a bad hinge bushing include:
- noise or squeaking coming from the door hinges
- excess play or looseness feeling in the hinge movement
- difficulty fully closing or opening the dishwasher door
Causes of a bad hinge bushing can be normal wear and tear over the life of the appliance. Small metal particles embedded in the bushing material during manufacturing may also cause premature wear.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
A door spring (actually the connector rope) broke on one side of our dishwasher making it feel heavy hard to close and easy to "drop" (potentially damaging the door hinges) Roger B. • Winston-Salem , NC • September 29, 2018
Checked out the AppliancePartsPros.com online parts/assembly diagrams for our Bosch dishwasher model and ordered the two sided set of new springs + connector ropes + connector-to-door ... plus a couple of other relatively inexpensive adjoining parts that might have become worn over time, just in case they were needed. The extra parts arrived in two days with standard shipping. Called about the "back ordered" primary set of parts (which had been listed as being "in stock" when I placed the...
Read more
More
$13.34
- Compare At:
-
$15.74
- You Save:
-
$2.40
Genuine Whirlpool part
By: Whirlpool
Part Number: 8184109
The Motor Spacer is an OEM part for Whirlpool microwaves. It is designed to support and position the turntable motor, ensuring it stays aligned and functions correctly. This spacer helps maintain the stability of the turntable, allowing even and consistent heating of food.
Causes of a bad motor spacer can include wear and tear over time, physical damage from heavy use, or misalignment due to accidental impacts. Regular inspection and maintenance can help identify issues before they lead to motor malfunction.
Symptoms of a bad motor spacer include:
- The turntable not rotating properly
- Unusual noises coming from the turntable area
- Inconsistent heating or cooking of food
- The turntable being unsteady or wobbling
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The turntable in the microwave stopped going around. David J. • Happy Valley , OR • November 20, 2017
Very easy fix. Unplugged microwave, then lowered bottom panel, removed the two leads to the turntable motor, removed two screws attached to motor, removed old motor, put new spacer on motor stem, installed motor with same two screws, reattached the two wires, reattached panel ( after cleaning all the grease that built up over the last 6 years), plugged microwave in and good as new! Took me twenty minutes. Note: the two screws holding the motor were not Phillips like those holding the panel. So...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Ge part
By: Ge
Part Number: WR02X10540
The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing.
Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.
Symptoms of a bad Lid Bumper include:
- The refrigerator lid closing too hard
- Unusual noises when closing the lid
- Visible wear or cracks on the bumper
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Evaporator fan motor Charles D. • Covington , LA • November 01, 2015
Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should.
Read more
More
$6.53
- Compare At:
-
$8.36
- You Save:
-
$1.83
Genuine Ge part
By: Ge
Part Number: WR62X23154
The Solenoid Valve Kit is an OEM part for GE refrigerators. This kit includes the solenoid valve, which is responsible for regulating the flow of refrigerant in the cooling system.
Causes of a bad solenoid valve kit include electrical malfunctions, physical damage, refrigerant leaks, or general wear and tear over time.
Symptoms of a faulty solenoid valve kit:
- Refrigerator not cooling properly or not maintaining consistent temperatures
- Compressor running constantly or cycling too frequently
- Frost buildup or ice accumulation in the freezer compartment
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Ice (broken seal) fizzer light out due to ice then auger motor auger coupler and solenoid cube failure Damon B. • Tumwater , WA • December 19, 2015
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet.
The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but...
Read more
More
$99.95
- Compare At:
-
$118.94
- You Save:
-
$18.99
Genuine Lg part
By: Lg
Part Number: 5040JA2009B
The Front Evaporator Motor Grommet is an OEM part for LG refrigerators. This grommet cushions and secures the evaporator motor, reducing vibrations and noise during operation to ensure efficient cooling.
Causes of a bad grommet can include prolonged use leading to material fatigue, exposure to extreme temperatures, or physical damage from accidental impacts. A damaged grommet can result in increased noise and potential misalignment of the evaporator motor.
Symptoms of a bad evaporator motor grommet include:
- Increased noise from the refrigerator
- Vibrations or rattling sounds
- Poor cooling performance
- The evaporator motor becoming loose
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Evap fan on refriderator was making horrible growlin noise Thomas K. • Ball Ground , GA • June 27, 2015
Ordered parts, removed top tray in freezer, popped the back inside freezer panel out removed and replaced fan, dampers and fan housing. Took about 15 minutes.
Read more
More
$10.46
- Compare At:
-
$12.45
- You Save:
-
$1.99
Genuine Lg part
By: Lg
Part Number: 5040JA2004A
The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.
Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.
Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:
- Unusual noises or vibrations from the back of the refrigerator.
- The evaporator motor shifting out of place, which can affect cooling efficiency.
- Increased wear on the evaporator motor due to lack of proper cushioning and support.
This OEM LG part is also compatible with some Kenmore models.
Do-It-Yourself Stories from Customers like You
Evap fan on refriderator was making horrible growlin noise Thomas K. • Ball Ground , GA • June 27, 2015
Ordered parts, removed top tray in freezer, popped the back inside freezer panel out removed and replaced fan, dampers and fan housing. Took about 15 minutes.
Read more
More
$11.62
- Compare At:
-
$13.83
- You Save:
-
$2.21
Genuine Ge part
By: Ge
Part Number: WB2K15
The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.
Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.
Symptoms of a bad Bumper include:
- Excessive noise
- Difficulty in sliding the drawer
- Misalignment
- Wear, and increased friction
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bumbers on stove top grates failed due to time of use Howard V. • Baton Rouge , LA • February 14, 2016
Looked for the parts at this site and ordered those need plus spares
Read more
More
$8.40
- Compare At:
-
$8.85
- You Save:
-
$0.45
Genuine Ge part
By: Ge
Part Number: WR2X8474
The Ice Maker Fill Tube Grommet is an OEM part for GE refrigerators. This grommet creates a seal between the ice maker fill tube and the refrigerator, preventing leaks and ensuring that water is properly directed into the ice maker during the filling process.
Causes of a bad grommet can include regular wear and tear, damage from exposure to freezing and thawing cycles, or degradation from exposure to water and moisture.
Symptoms of a bad ice maker fill tube grommet include:
- Water leaks around the ice maker fill tube area
- Ice maker not producing ice properly
- Visible cracks or deformation in the grommet
- Water pooling inside or around the refrigerator
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Had a cracked plastic ice maker inlet water tube that flooded part of kitchen floor Terry C. • Durham , NC • February 16, 2019
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,...
Read more
More
$32.95
- Compare At:
-
$38.88
- You Save:
-
$5.93
Genuine Frigidaire part
By: Frigidaire
Part Number: 241684901
This spacer fits between the fixed crusher blades inside the refrigerator's ice bucket assembly. It preserves the correct gap and alignment so the auger turns freely and crushed ice dispenses smoothly without jams or grinding.
- Maintains the correct spacing between fixed crusher blades in the ice bucket
- Keeps the blade stack and auger aligned for smooth rotation
- Helps prevent ice jams, grinding noises, and inconsistent crushed-ice output
- Replaces a worn, cracked, or missing spacer discovered during service
What's included: One fixed blade spacer Install notes:
- Disconnect power before servicing; remove the ice bucket from the freezer door/bin
- Carefully disassemble the crusher housing, noting the exact order of blades, spacers, and washers
- Wear cut-resistant gloves; crusher blades are sharp
- Reassemble in the original sequence and verify the auger turns freely before reinstalling
Do-It-Yourself Stories from Customers like You
Refrigerator would dispense ice cubes however would no longer provide crushed ice Thomas R. • Washington , MO • October 16, 2017
Replaced "Ice Crusher Housing" and "Fixed Blades Spacer, both of which had broke.
Read more
More
$21.40
- Compare At:
-
$25.47
- You Save:
-
$4.07
Genuine Ge part
By: Ge
Part Number: WR02X10520
This fan-mount grommet fits the evaporator or condenser fan assembly to isolate vibration and keep the motor aligned. Replacing a worn grommet can quiet rattles and prevent the fan blade from rubbing the housing. What it does:
- Isolates the fan motor from its bracket to reduce vibration and operating noise
- Helps maintain proper fan motor and blade alignment/clearance
- Replaces cracked, flattened, hardened, or missing grommets
- Typical symptoms: rattling, buzzing, or vibration sounds from the freezer or rear machine compartment
What's included:
Install notes:
- Disconnect power before servicing; pull the refrigerator forward for rear access if needed
- Evaporator fan: remove the freezer's rear panel; condenser fan: remove the rear service panel
- Support the motor, remove the fan blade and mounting hardware as needed, replace the grommet, and reassemble
- Ensure the fan spins freely and does not contact the shroud before restoring power
Do-It-Yourself Stories from Customers like You
Condenser fan stopped. Bob W. • San Carlos , CA • May 01, 2021
Condenser fan stopped on my big 2003 Monogram 4 foot wide ZIS480D Refrigerator. It is top mounted. The fridge had to be rolled out. 20 screws removed and the top sheet metal to get at the condenser. That was the only way to get at it. Works like new now.
Read more
More
$9.71
- Compare At:
-
$11.46
- You Save:
-
$1.75
Bumper, Bushing, Grommet replacement parts can be a game-changer when it comes to keeping our major appliances and outdoor power equipment running smoothly. These parts might seem small, but they play pivotal roles in maintaining or restoring the functionality of devices like washers, dryers, and lawn mowers. Without these crucial components, your equipment could suffer from unnecessary wear and tear, ultimately leading to bigger problems down the line.
When we talk about Bumper, Bushing, Grommet parts, we're really discussing the backbone of your appliance's performance. These components work together to reduce vibrations, minimize noise, and provide essential cushioning. This means longer life for your machines and a quieter, more efficient operation. Opting for OEM replacement parts ensures you're getting pieces that are designed specifically for your appliance, guaranteeing both quality and compatibility. These original parts meet the manufacturer's standards, giving you peace of mind that your equipment is in the best hands.
Rest easy knowing that high-quality Bumper, Bushing, Grommet parts are readily available to help keep your appliances and outdoor equipment running like new. Just remember, using the right parts can make all the difference in maintaining the longevity and performance of your machines.
More