Support Parts

The Suspension Rod Kit is an OEM replacement part for Whirlpool washing machines. They’re designed to help keep the washer balanced. If you’re washing machine is noisy, banging, or “walking”, it may be time to replace your suspension rods.

 Included in the kit:

• 4 suspension rods
• 4 bearings
• 4 bearing cups

The suspension rods in a washing machine can also experience failure for similar reasons as other parts. Overloading the washing machine is a frequent cause of suspension rod failure. The excess weight puts too much stress on the rods, causing them to bend or break. Constant use over time can lead to suspension rod failure as well. The repetitive motion can wear down the components and cause them to lose their structural integrity.

Replace your suspension rods and enjoy peaceful laundry time again! This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Suspension Rod Kit is an OEM replacement part for Whirlpool washing machines, designed to provide support and stability to the washer drum. This kit includes four suspension rods that connect the washing machine drum to the frame, allowing for controlled movement and reducing vibration during the spin cycle. These rods play a critical role in absorbing the motion of the washer drum, ensuring smooth operation and preventing excessive noise or movement that could damage the machine or affect its performance.

Causes of these issues often stem from normal wear and tear, as the suspension rods can become worn out or damaged over time. Heavy or uneven loads can also put extra stress on the rods, leading to premature failure.

Symptoms of a bad part:

• Excessive noise or vibration during operation
• Shaking or movement of the washer
• Unevenly washed clothes or excessive wrinkles

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Suspension Rods are OEM parts for Whirlpool washing machines. They are designed to support the washer's tub assembly, maintaining balance and stability during the spin and agitation cycles. These rods connect the tub to the washer's frame and help absorb vibrations, preventing excessive movement that can lead to operational issues.

Symptoms of bad Suspension Rods include:

• Unusual vibrations or shaking during the wash cycle.
• The washing machine "walking" or moving across the floor.
• Loud banging noises, especially during high-speed spins.
• The tub sagging or tilting more than usual when loaded.

Causes of bad suspension rods can include wear and tear from normal use, stress from unbalanced loads, or degradation of the material properties over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This OEM replacement Universal Element Receptacle kit is designed to fit most popular range brands such as Maytag, Magic Chef, Jenn Air, Whirlpool, Roper, Kenmore, Frigidaire, Admiral, Crosley, Estate, and Amana. This kit comes complete with everything you need for a hassle-free installation.

Included in the Kit:

• Two different mounting brackets
• A plastic terminal block
• Wires
• Hi-temp wire connectors
• heat insulators

In case your oven or range is displaying any of the following signs: non-heating burners, malfunctioning heating elements, burning odor, or a buzzing sound, this kit could be the answer to the problem. To replace the kit, you would require specific tools such as wire strippers, a heat gun or hair dryer, and a #1 square-head screwdriver. 

This support is a refrigerator mounting bracket that stabilizes internal components and keeps assemblies aligned for reliable operation. It replaces worn or broken supports to help reduce rattling and improper panel fit. What it does

• Secures and aligns internal cabinet or component panels to prevent shifting during normal use
• Helps maintain proper spacing for doors, panels, or internal assemblies
• Reduces vibration or rattling caused by loose or damaged supports
• Commonly replaced when a support is cracked, broken, or no longer holds mating parts securely

• High-level replacement: typically accessible from inside the cabinet or behind a trim panel; exact steps depend on model
• Use proper tools and retain all fasteners during removal for reinstallation
• Disconnect power before servicing any electrical components or removing panels near wiring

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods designed to support the washing machine's tub assembly. By absorbing vibrations and stabilizing the tub during the spin cycle, these rods play a crucial role in reducing noise and preventing the washing machine from moving excessively. 

Causes of a bad Suspension Rod Kit can include normal wear and tear, overloading the washing machine, or frequent heavy cycles that put extra strain on the rods. 

Symptoms of a bad Suspension Rod Kit include:

• The washing machine is excessively noisy during the spin cycle.
• The tub seems unbalanced or moves more than usual, even with light loads.
• The washing machine "walks" or moves from its original position during operation.
• Unfinished cycles or error codes indicating an unbalanced load.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Washer Front Shock Absorber is designed to restore the smooth operation of your Samsung washer. This genuine OEM part ensures a perfect fit and seamless integration with your appliance, maintaining the stability and balance during each wash cycle. Made from durable materials, the Samsung Front Shock Absorber effectively reduces vibrations and minimizes noise, enhancing the overall performance of your washer. Installing this shock absorber can prevent excessive movement and potential damage to your machine, prolonging its lifespan and ensuring reliable functionality. Compatible with a wide range of Samsung washer models, this front shock absorber is easy to install, allowing you to quickly address any issues and get your laundry routine back on track. Choose the Washer Front Shock Absorber for a dependable solution that keeps your Samsung washer running smoothly and efficiently.

The Suspension Rod is an OEM part for GE washing machines. This component is crucial for stabilizing the washing machine drum during spin cycles, minimizing vibrations and ensuring smooth operation. The suspension rod measures approximately 25 inches.

You should replace the suspension rod if it becomes worn out or damaged. Common causes of a bad suspension rod include regular wear and tear, overloading the washing machine, or exposure to moisture and corrosive substances. When the suspension rod is compromised, it can affect the machine's balance and performance.

Symptoms of a bad suspension rod include:

• Excessive shaking or vibrating during the spin cycle
• The washing machine being off-balance or moving during operation
• Unusual banging or thumping noises
• Leaks due to increased stress on other components

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: Left Hand side

The Track, Asm (LH) is an OEM part for Whirlpool dishwashers. It is a left-hand side track assembly that supports and guides the dishwasher's upper rack as it slides in and out. This component is crucial for the smooth operation of the rack system, ensuring that dishes can be easily and securely positioned within the dishwasher. The track measures approximately 13.25 inches in length and 3.25 inches in width. 

Causes of a bad Track, Asm (LH) can include physical damage from mishandling, accumulated debris obstructing the track's pathway, or wear from frequent use which may lead to malfunction or stiffness in the rack's movement.

Symptoms of a bad Track, Asm (LH) include:

• Difficulty pulling the upper rack in and out
• The rack getting stuck or derailing
• Unusual noises when the rack is moved

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Suspension Rod is an OEM part for GE washing machines. This component is crucial for stabilizing the washing machine drum during spin cycles, minimizing vibrations and ensuring smooth operation. The suspension rod measures approximately 25 inches.

You should replace the suspension rod if it becomes worn out or damaged. Common causes of a bad suspension rod include regular wear and tear, overloading the washing machine, or exposure to moisture and corrosive substances. When the suspension rod is compromised, it can affect the machine's balance and performance.

Symptoms of a bad suspension rod include:

• Excessive shaking or vibrating during the spin cycle
• The washing machine being off-balance or moving during operation
• Unusual banging or thumping noises
• Leaks due to increased stress on other components

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: Right Hand side

The Track, Asm (RH) is an OEM part for Whirlpool dishwashers. It is the right-hand side track assembly that supports and guides the dishwasher's upper rack as it slides in and out. This part ensures that the rack moves smoothly and securely, allowing for easy loading and unloading of dishes while preventing disruptions during the wash cycle.

Causes of a bad Track, Asm (RH) can include wear from regular use, accumulation of debris that impairs movement, or damage from improper loading of the dishwasher rack.

Symptoms of a bad Track, Asm (RH) include:

• Difficulty in sliding the upper rack in and out
• The rack becoming stuck or detaching from the track
• Noises such as grinding or clicking when the rack moves

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Restore smooth, dependable rack movement. This kit replaces worn carriers and rollers so the lower dishrack glides in and out without binding, derailing, or dropping.

What it does

• Supports and guides the lower rack along the tracks
• Replaces broken, missing, or flat-spotted wheels and cracked carriers
• Helps prevent the rack from popping off the rails during loading
• Reduces drag that leads to stiff, uneven rack travel

What’s included
Four carrier brackets, four roller wheel brackets (covers), and eight wheels — a complete set of four assemblies.

Install notes

• Disconnect power before servicing the rack area.
• Pull the lower rack out; swap one assembly at a time to match left/right orientation.
• Fully seat tabs/locks on each carrier; verify wheels roll freely.
• Best practice: replace all four together for even tracking, then run a quick test cycle.

The Tub Suspension Pads are an OEM part for Whirlpool washing machines. These pads are designed to provide cushioning and stability to the washer tub, reducing vibration and noise during the wash and spin cycles. This kit contains three pads, each 2 1/4 inches long

Over time, the tub suspension pads can wear out or deteriorate, especially with frequent use or heavy loads. Exposure to harsh chemicals or unbalanced loads can also cause the pads to lose their effectiveness.

Symptoms of bad tub suspension pads include:

• Excessive vibration or shaking during operation
• Loud banging or thumping noises during the spin cycle
• The washer moving or "walking" across the floor
• Uneven or poorly balanced loads leading to inefficient washing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Rear Shock Absorber is designed to provide essential dampening for your Samsung washer, ensuring smooth and stable operation during each cycle. This crucial component effectively minimizes vibrations and reduces noise, enhancing the overall performance and lifespan of your washing machine. Crafted as a genuine OEM part, the Washer Rear Shock Absorber guarantees compatibility with a wide range of Samsung washer models, ensuring a perfect fit and straightforward installation process. When your original shock absorber becomes worn out, cracked, or fails to function properly, replacing it with this high-quality part restores your washerGÇÖs functionality and reliability. This rear shock absorber not only improves the stability of your appliance but also contributes to a quieter laundry environment. By maintaining proper dampening, it helps prevent damage to other washer components, saving you from costly repairs in the future. Choose the Washer Rear Shock Absorber to ensure your Samsung washer operates at its best, providing you with a better and more efficient washing experience.

The Suspension Bearing Kit is an OEM part for Whirlpool washing machines. It is designed to support the tub assembly and ensure smooth, stable operation during the wash cycle. The kit includes bearings and other components that help absorb vibrations and reduce noise, contributing to the longevity and efficiency of the machine. The 8-piece set has 4 types of suspension rod supports made of strong plastic and about 1.5 inches in diameter. 

Symptoms of a bad Suspension Bearing Kit include:

• Unusual noise during the spin cycle,
• Excessive vibration or "walking" of the washer,
• The washing machine drum sagging or appearing off-balance.

Causes of suspension bearing failure often involve wear and tear from regular use, overloading of the machine, or inadequate maintenance leading to deterioration of parts.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washing Machine Shock Absorber Kit is an OEM part for LG washing machines. This kit includes a shock absorber designed to reduce vibrations and absorb shocks during the wash cycle, providing stability and minimizing excessive movement. 

Over time, the shock absorbers can wear out due to regular use, exposure to heavy or unbalanced loads, or damage from impact. These factors can lead to reduced effectiveness of the shock absorbers, causing increased vibrations and noise.

Symptoms of a bad shock absorber kit include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging or thumping noises
• The washer moving or "walking" during operation
• Leaks due to increased stress on the tub and other components

This OEM LG part is also compatible with Sears/Kenmore.