Need Help?
Call or text
The Husqvarna outdoor power equipment shoulder bolt is an OEM replacement part that attaches to the suspension arm and wheel bracket. It is primarily utilized for securing components and providing stability in the equipment's assembly. This part fixes the following symptoms:
Usually ships within 4 - 14 days
This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.
This hairpin clip is a metal fastener, also known as a spring cotter or retaining pin. This is standard hardware that features a straight edge and an indentation to ensure secure attachment to desired parts or equipment. This reusable formed wire is easy to install and uninstall and has multiple applications. This part is commonly used in conjunction with clevis pins. This replacement hairpin clip comes in a polished finish. Use this genuine OEM replacement part on lawnmowers and tillers from Husqvarna, Craftsman, Murray, Weed Eater, Ryobi, Poulan and Poulan Pro. This item is priced and sold individually.
Attaching to the front lift link, this washer is a component for use with lawn tractors. A washer is a component that is used with a screw fastener. Its purpose is to keep the screw from loosening by distributing the load over a larger area. A new washer may be needed if the user has mistakenly misplaced the original. When dealing with small parts, it's a good idea to place them in a container so that they are not lost. The washer could physically break over time due to normal wear and tear. If this is the case, it will need to be replaced so that the screws do not loosen. The repair person may choose to wear gloves to protect his or her hands during the replacement process.This washer is sold individually. It is an OEM part that is sourced directly from the manufacturer. It's compatible with lawn tractors that are manufactured by the Husqvarna, Poulan, and Craftsman brands.
This flange nut can be used as a replacement part for snowblowers, lawnmowers, and tillers. Flange nuts fasten materials to one another in conjunction with a bolt. A flange nut is different from a regular nut in that it features a protruded flange on its end that functionally serves as a washer, negating the need for a separate washer part. A flange nut might have to be replaced for several reasons, including the part going missing, which is a frequent occurrence as it is small and does not necessarily cause any immediate damage if it is lost. Additionally, a flange nut can be subject to damage over time through general wear and tear, overuse, punctures, piercings, scrapes, or erosion to the metal material. Such damage can hamper its ability to fasten materials together. If this is the case, a replacement flange nut should be ordered. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This flange nut is a genuine OEM Husqvarna part, sold individually. It compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.
The pipe clip is used to secure the vent pipe to the fuel tank vent, so the machine can be vented properly. It might need to be replaced because the current pipe clip has been lost. The clip could also become corroded or damaged and need to be replaced. Without a clip in good condition, it will not be possible to properly secure the vent pipe. The replacement of the metal pipe clip is simple. This is a genuine OEM replacement part and it is sold individually. The pipe clip can be used with a range of handheld lawn and garden machines including tillers, string trimmers, hedge trimmers, edgers, and chainsaws. Compatible brands include Echo, Mantis, and Little Wonder. Owners should always consult their manual to make sure they are buying the correct pipe clip and other replacement parts for their machines.
Combustion engines use carburetors to manage the amount of air and fuel entering the chamber. However, to start some combustion engines, a choke is required. This part regulates the air pressure within the intake manifold. This effectively adjustes the air and fuel levels entering the engine, and allows more fuel to reach the inside to ensure that it starts easily. The choke valve is then opened as the machine runs. The choke is installed through a grommet that ensures a good seal, but the grommet can wear out over time. This replacement choke grommet is designed for an array of small engine machines, including pruners, trimmers, saws, and edgers made by Little Wonder and Echo. This OEM replacement part is sold individually and is made of long lasting rubber. It does not include any other components in the assembly.