Need Help?
Call or text
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
Usually ships within 4 - 14 days
An air filter blocks tiny particles from entering and harming the engine. Over time, it will accumulate dirt and dust. If it is too worn-down, it will no longer be an effective barrier. Small debris may make its way into the engine and cause clogging. It can impede proper airflow. Replacing an air filter is a relatively quick and straightforward maintenance project. Let the device cool first. Then, loosen or remove the air filter cover. Take out the failed filter and install the replacement. Make sure to align it to the housing. Return the air filter cover to its original position. This part will fit several trimmer models from brands like Husqvarna, Poulan, and Craftsman. It has the same shape and cut as the trimmer’s original filter. This replacement does not come with the airbox cover. One genuine Husqvarna airbox filter per order is included, sold individually.
This OEM replacement part is a foam air filter for a weed eater. This part sifts out dirt and debris before it can enter the carburetor and engine. The carburetor is responsible for maintaining the delicate balance of air and gasoline needed to create a spark in the engine. If it becomes clogged by dirt that's been kicked up into the air during mowing, the mixture will become contaminated and the carburetor will no long work properly. Foam air filters should be replaced every three to four months, depending on how much use the weed eater gets. Generally, after 25 hours of use, the filter will become clogged and will no longer function efficiently. When changing out the filter, first apply a small dab of two cycle oil to the pouch that the filter arrives in. Squeeze with a bit of paper to remove any excess oil and then switch the old filter for the new. This will help the filter collect dirt and debris. This filter is made of seafoam green foam and is intended to be used with Poulan, Husqvarna, and Paramount weed eaters. It ships individually and is sourced from the original manufacturer.
This authentic OEM part is a replacement foam air filter for a gas-powered leaf blower. For a gas-powered engine to work, it must maintain a balance of fuel and oxygen. This means it is constantly taking in air from outside the engine. However, working in dusty areas can cause a lot of debris to mix with the air. A foam air filter helps to catch that debris before it can clog up an engine. After an extended period of use, though, the filter will become clogged. Replacing a foam air filter is an easy repair that will only require a screwdriver. Remove the air filter cover, take out the old filter, and put in the new filter. This part works with gas-powered leaf blowers from Poulan, Weed Eater, and Husqvarna and is sourced directly from the original manufacturer. It ships individually.
The fuel filter is designed to clean the fuel before it enters the carburetor. This helps to catch dirt and debris that can get into the fuel line and build up over time, affecting the performance. When there is a clean fuel filter in place, the engine will run at peak performance. Over time, the filter will become dirty and clogged with debris and fuel residue, requiring replacement as a part of routine maintenance. This OEM replacement can get lawn and garden equipment back in shape in no time. Prior to the repair, make sure to disconnect the spark plug and drain the fuel. This genuine OEM fuel filter from Husqvarna is compatible with multiple models of engines. It can be used with chainsaws from Poulan, Jonsered, and Husqvarna, including more than 150 different models. This filter is sold as an individual unit.
This foam air filter will work with certain models of trimmer. The air filter is an important part of the trimmer. It is used to make sure that dust and debris from the air supplied to the unit don't get into the machine and cause problems. If there is no filter, it could damage the trimmer. Check the filter regularly to see if it might need to be replaced.The foam air filter on the trimmer will need to be replaced regularly to ensure the machine is performing optimally. Over time, the material can clog the filter, which will reduce proper airflow in the machine. Replace the filter if they notice that it is dirty and clogged. Replacement is fast and easy.The filter will work with select models of trimmers from Weed Eater and Husqvarna. This piece is sold individually. Owners might want to consider having several of them on hand for replacements. This is a genuine OEM replacement filter that was sourced from the manufacturer.
This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.
This foam air filter is a genuine replacement for select Husqvarna engines. The air filter is made from high-quality foam that allows it to capture particles and debris before they enter the carburetor to improve engine performance. The air filter naturally becomes clogged over time with regular use of the machine and will need to be changed regularly in order to prevent restricted airflow that could affect engine performance. It will require replacement as a part of routine maintenance, but intermittent repairs may come up, as well. It is often a good idea to keep an extra air filter on hand for emergency replacements. This genuine OEM part is the perfect fit for compatible engines. This genuine replacement air filter is designed for use with trimmers, pole saws, edgers, brushcutters, and other select models. This air filter comes pre-oiled and is able to be installed without any tools. Allow the engine to cool before changing the air filter or doing any other repairs. This air filter is sold as an individual unit.
The air filter on lawn machines protects from dirt and debris. Lawn equipment typically creates a substantial amount of dust and dirt, and the air filter is needed to ensure that dirt does not get into the engine and the carburetor. The air filters are designed to trap dirt, which means that they will eventually need to be replaced. The longer they are used, the more clogged they will become. This can prevent enough air from getting into the carburetor, which could result in issues with the engine misfiring and starting properly. Owners should regularly check the condition of the air filters and replace them when they become too dirty. This is a genuine OEM part sold individually that will replace air filters on trimmers, leaf blowers, and pole pruners. The part is compatible with a range of brands including Craftsman, Weed Eater, Poulan, and Husqvarna.
This part is a replacement air cleaner cover assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective air cleaner cover assembly in a variety of trimmer models. This air cleaner cover assembly protects the air filter from becoming damaged. If the air filter is not secured by the cover, it could lead to dirt and debris entering the internal engine components. For this reason, the air cleaner cover should be replaced if cracked or damaged in any way. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. No special tools are required to replace this part, simply snap into place. For more accurate information on how and where to install this air cleaner cover assembly, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this air cleaner cover assembly is suitable for use on several different models of trimmers manufactured by MTD, Troy-Bilt, Cub Cadet, and Yard Machines. This is a genuine part made of high-quality, durable plastic and is sold individually.
This genuine MTD air cleaner assembly can be used as a replacement part for string trimmers. An air cleaner assembly pincludes an air cleaner as well as all of its associated components. The purpose of an air cleaner is to prevent the engine of the string trimmer from accumulating dirt, debris, and other such external materials within its infrastructure.Air cleaners are often subject to replacement within the lifespans of standard string trimmers, and if its fastening components and housings are damaged as well, this air cleaner assembly should be ordered as a complete replacement. Damage to an air cleaner can come in the form of piercings, holes, rips, tears, or corrosion to the material that impedes it from preventing the accumulation of external materials. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This air cleaner assembly is compatible with the following brands: MTD and Craftsman.
The genuine replacement air filter is made of foam and catches dust and debris from the air as it enters the engine on select lawn and garden equipment. Over time, filters will become clogged with regular use, which makes replacing them a part of routine maintenance on most engines. The air filter may also become clogged intermittently or due to excessive dust buildup between maintenance schedules, so it may be helpful to keep an extra filter on hand for emergency replacements. These filters cannot be cleaned and must be replaced when they become clogged. This genuine OEM filter is manufactured to exact standards by Husqvarna and is designed for use with hundreds of machines from Jonsered and Husqvarna, including blowers, trimmers, edgers, hedge trimmers, and saws. Replacing the air filter does not require any tools. Allow the engine to cool and simply remove the filter cover, take out the old filter, and replace the new filter. Then replace the cover. Always wear gloves when performing engine work. This filter is sold as a single unit and does not include the air filter cover or base assembly.
This is a quality air filter used with many types of gas powered string trimmers. The air filter plays an important part in the engine since it ensures the motor only has clean air available. The air filter is responsible for catching dirt, dust, and other debris and collecting it in one place before it can move into other components of the trimmer. The air filter needs to be inspected on a regular basis for damage or clogging. If either of these things occurs, the air filter needs to be replaced to ensure the engine gets clean air.No tools are needed to replace this string trimmer air filter. The bolt knob that secures the air filter cover will need to be removed first. Remove the original air filter and place the new one in the same location. Reassemble the parts and make sure to test the string trimmer before use.This air filter is compatible with various string trimmers manufactured by Poulan, Poulan Pro, and Craftsman. It is sold as an individual component. It is an authentic OEM replacement part that is sourced directly from the manufacturer.