Tank & Container

Replacement fuel tank for gas leaf blowers. Installs as the main fuel storage container. Replace if cracked, leaking, or damaged from impact or wear.

This is a fuel tank assembly that is made to be used with several models of leaf blowers from various manufacturers. It works with handheld blowers and includes a full assembly with the fuel tank, fuel cap, and fuel lines. This component is part of the fuel system and should be replaced immediately if it is damaged or cracked as it can be dangerous to use it in that state. When replacing the fuel tank assembly, make sure the leaf blower is turned off. Disconnect the spark plug wire and drain the gas from the tank before moving forward with this project. A screwdriver is needed to make the repair and work gloves will also be useful. Take out the screws that hold the fuel tank and then remove the fuel lines. The new replacement fuel tank can be installed before the fuel lines are added and the cap is placed on top.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. The fuel tank assembly is sold as an individual item. It is made to be compatible with several leaf blowers manufactured by Yard-Man, Troy-Bilt, Craftsman, MTD, and Cub Cadet.

This replacement oil tank for a pole pruner or chainsaw is an authentic OEM replacement part. The inner workings of an engine consist of many moving parts. These parts are mostly made of metal and they thrash about against each other to produce and transfer energy. Engines use oil to lubricate these parts so that they do not rub and create friction as this would cause the engine to overheat. This oil tank lets operators quickly top up their engines with oil without having to take apart the inner mechanics. Oil tanks are made of durable reinforced plastic but it is still possible to bang, dent, or even puncture them. Should this happen, oil will leak from the tank and the engine will be starved of lubrication. For safety purposes, it is important to immediately replace a broken oil tank. To do so, use a wrench to remove the old tank and install the new part with the same bolts. This oil tank is compatible with Poulan and some Husqvarna appliances, and as a high-quality replacement part, it comes sourced from its original manufacturer. This part includes an oil tank and oil tank cap but it does not include an oil line.

Replacement fuel tank for grass line trimmers. Stores fuel that powers the engine. Replace if cracked, leaking, or damaged to restore fuel containment.

The momentary switch is a part that is unique to self-propelled lawn mowers and used to control the power of the self-propelled movement. The momentary switch provides power when pressed and held, and will ensure that the unit operates properly while in use. Over time, the momentary switch can become worn, short out, or just stop working as it should. This will require a replacement with a compatible part or the self-propelled part of the machine will not work properly. This genuine OEM part is compatible with self-propelled mowers from Cub Cadet, Bolens, MTD, Murray, and Troy-Bilt. It is made of durable materials and sold individually. Replacing this switch requires a wrench and screwdriver, as well as a socket set. Without a self-propelled switch, the mower will still operate but it will require the user to push the machine with their entire body weight. This can make the process of mowing much more difficult and often cause further unnecessary wear to the machine, which is why a replacement is essential.

Replacement fuel tank for lawn mowers. Mounts to mower exterior to hold fuel supply. Replace if cracked, leaking, damaged, or missing. Direct fit part.

Replacement fuel tank assembly for lawn mowers and outdoor power equipment. Installs on the engine to hold fuel. Needed when original is cracked or leaking.

Replacement fuel tank for small engines. Installs as the main fuel reservoir. Order a new tank if yours is cracked, leaking, damaged, or punctured.

This is a replacement fuel tank for a small engine used on outdoor power equipment. It stores gasoline and feeds it to the engine's carburetor for combustion. Replace this tank if it is cracked, leaking fuel, or has become warped or damaged, causing fuel delivery problems or creating a safety hazard.

This part is a plastic fuel tank that holds gas, and fits onto the rear handle set and the motor of a trimmer. Its purpose is simply to hold gas safely and feed it into the machine and provide the engine with the power to run.The fuel tank may become cracked or broken, in which case it will not effectively and safely store gas. If there is a small crack or hole in the fuel tank, not only can the gas leak out, but it also allows air, moisture, and other debris to get into the gas which affects its performance and could lead to engine problems, among other problems with the machine.This part is a genuine Echo part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on products manufactured by Echo including hedge trimmers and rotating hedge trimmers.