Thermador Parts

This heat shield protects the area beneath the cooktop/oven from heat and accumulated spills, helping prevent damage to nearby components and simplifying cleanup. Designed to fit in the original mounting location. What it does:

• Deflects and dissipates heat away from sensitive components and cabinetry
• Catches and channels spills or drips away from burners and electrical parts
• Helps reduce risk of scorched surfaces and heat-related discoloration
• Restores proper clearance and protection after removal or damage

• Disconnect power (and gas, if applicable) and allow the appliance to cool completely before starting
• Handle carefully; edges may be sharp and mounting tabs can be fragile
• Verify correct orientation and secure mounting per manufacturer instructions

This is a replacement grease tray cover that restores the oven/cooktop drip area to help contain grease and protect the tray below. It improves grease containment and keeps the cooking area looking finished. What it does:

• Covers the grease collection area to help contain drips and splatters
• Helps prevent grease from pooling on the tray and reduces cleanup
• Restores a damaged or missing cover so the appliance looks and functions correctly
• Can reduce smoke and odors caused by exposed grease buildup

• One grease tray cover

• Ensure the appliance is completely cool and power/gas is turned off before starting
• Remove the old cover and clean the tray area; use gloves to handle greasy parts
• Align the new cover with the tray opening and seat it in place per the appliance instructions

This pressure regulator controls and stabilizes incoming water pressure to the appliance, helping maintain consistent operation and protect internal valves and seals. Fits systems that use a 3/4 inch inlet regulator. What it does:

• Reduces high incoming water pressure to a safe, steady level for the appliance
• Prevents pressure-related leaks, valve chatter, and premature wear on seals
• Helps maintain consistent water flow for reliable cycles and operation
• Commonly replaced when irregular pressure, humming valves, or water leaks occur

• One pressure regulator (3/4 in.)

• Turn off water supply and power to the appliance before starting; relieve system pressure first
• Inspect connection fittings and seals; use appropriate thread sealant if required by the OEM
• Tighten to manufacturer torque recommendations and check for leaks after restoring water

A small flat mounting washer that secures fasteners and provides a stable spacer for assemblies. Replaces worn or missing washers to restore proper part alignment and prevent movement. What it does:

• Acts as a flat spacer under a nut or bolt to distribute load and prevent loosening
• Keeps components aligned and properly spaced to reduce wear
• Helps stop rubbing or metal-on-metal contact that can cause noise or damage
• Commonly needed when fasteners are loose, panels shift, or assemblies wobble

• One flat mounting washer

• Shut off power to the appliance before beginning any service
• Remove any panels or components necessary to access the fastener; use hand tools appropriate for the fastener type
• Replace the washer with the same orientation and retighten the fastener to avoid over-torquing

This bottom refrigerator hinge secures and supports the lower door, restoring proper alignment and smooth opening/closing. It replaces a worn or damaged hinge to stop sagging doors and reduce binding or uneven gaps. What it does:

• Supports the lower edge of the refrigerator door and bears door weight
• Acts as the pivot point for normal door swing and alignment
• Helps stop door sag, rubbing, or uneven sealing caused by a worn hinge
• Reduces binding, scraping, and noise when opening or closing the door

• Turn power off to the appliance and remove food from the door area before starting
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use correct-size tools and follow OEM torque guidance; avoid over-tightening fasteners

The Storage Bin is an OEM part for Whirlpool refrigerators. It provides organized, adjustable storage space in the refrigerator door. The bin has been designed to hold condiments, beverages, snacks, and other small refrigerator items. 

Causes of a bad storage bin can include broken hinges or mounting clips, cracks or holes in the plastic material, or a bent or warped bin that no longer sits securely or organizes items well.

Symptoms of a bad storage bin include:

• Items falling out of the bin 
• Bin not sitting flush or securely in the door
• Difficulty removing or replacing the bin
• Cracked or damaged plastic that affects functionality

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Condenser Fan Motor is an OEM part for Whirlpool brand bottom-mount refrigerators. This motor powers the condenser fan which dissipates heat from the refrigeration system coils, maintaining cool interior temperatures.

Causes of failure include normal bearing wear from continuous rotations, or buildup obstructing free blade movement. 

Symptoms of a faulty motor include:  

• Elevated interior temperatures and frost propagation issues   
• Extended run times and higher energy consumption
• Grinding or buzzing noises emanating from the refrigeration system area

This Whirlpool replacement restores efficient heat removal and preserves food freshness. Compatible with KitchenAid, Maytag, and some Kenmore models too, it prevents future repair bills.
 

This door latch assembly secures the door closed and signals the control that it's safely shut, allowing cycles to start and run. Replacing a worn latch restores a reliable safety interlock and consistent operation.

• Secures the door and engages the safety interlock so the appliance can operate
• Sends a "door closed" signal to the control
• Common symptoms: door won't latch or stay closed; unit won't start or pauses as if the door is open; intermittent operation when the door is bumped; visible wear or damage to the latch
• Helps prevent nuisance "door open" indications

• Disconnect power before servicing
• Access the latch from the door area; remove inner panel or trim as required by your model
• Note wire positions, transfer connectors, and mount the new latch in the same orientation
• Test door closure before reassembly