Whirlpool Dishwasher Valve

This dishwasher overfill control float mounts in the tub floor and rises with the water level to trip the float switch and stop filling. Replacing a warped or stuck float restores proper fill control and helps prevent leaks. What it does:

• Monitors tub water level and actuates the float switch to shut off the inlet valve
• Helps prevent overfilling and water leaking from the door
• Common symptoms of a faulty float include no fill, continuous filling/overfilling, or inconsistent water level

• Float and retainer

• Disconnect power and turn off the water supply before servicing
• Remove the lower rack; lift out the old float
• Access beneath the tub may be required to release/install the retainer
• Ensure the float stem engages the switch lever and moves freely; test-fill and check for leaks

Fits most Kitchen Aid dishwashers. Replaces old 2 coil valves.

Replacement water inlet valve that controls water flow into the refrigerator's dispenser and ice maker, restoring proper filling and preventing overflows. Direct-fit design replaces the original valve on compatible Whirlpool refrigerators. What it does:

• Regulates water flow from the household supply to the refrigerator dispenser and ice maker.
• Opens when the dispenser or ice maker calls for water and closes to stop flow and prevent overfilling.
• Common symptoms: no water from the dispenser, slow/weak fill, ice maker not filling, or water leaking at the valve.
• Designed to match the original valve's function and plumbing connections for straightforward replacement.

• Disconnect power to the appliance and shut off the water supply before starting any work.
• Use basic hand tools to remove and reinstall mounting screws and water line fittings; support lines to avoid stress on fittings.
• Inspect and replace any damaged O-rings or supply tubing; tighten fittings securely but avoid overtightening.
• After installation, turn water on slowly, check all connections for leaks, then restore power and verify dispenser/ice maker operation.

Float that detects and communicates water level to the appliance control so the washer or dishwasher can fill and drain properly. Replaces a cracked, stuck, or worn float to restore reliable water sensing. What it does:

• Senses water level and relays position to the machine's control system.
• Helps prevent overfilling or unintended continuous filling when working correctly.
• Can resolve symptoms such as flooding, constant filling, no fill, or improper drain cycles.
• Works with the appliance's existing valve and switch components to re-establish normal fill/drain operation.

• Disconnect power (and water supply where applicable) before beginning service.
• Remove outer panels or tub shroud to access the float; use basic hand tools.
• Handle clips and fittings gently; do not force plastic tabs or connectors during removal/installation.
• After installation, restore power and run a test cycle to ensure correct fill and drain behavior.

The Portable Conversion Kit is an OEM part for Whirlpool dishwashers, designed to convert built-in units into portable dishwashers. This kit includes all the necessary components for the conversion.

Causes of a bad Portable Conversion Kit can include incorrect installation, which can lead to leaks or improper water flow, wear and tear on the hoses or adapters over time, and damage from heavy use or accidental mishandling, which can affect the integrity of the connections and the overall operation of the dishwasher.

Symptoms of a malfunctioning Portable Conversion Kit include:

• Leaks from the hose connections or faucet adapter.
• Difficulty attaching or detaching the kit from the faucet, indicating wear or damage.
• Reduced water flow or pressure, affecting the dishwasher's cleaning performance.
• Noticeable wear on hoses or fittings that could lead to future leaks or failures.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This convection conversion kit lets compatible ovens or microwaves add or restore convection cooking capability for more even browning and faster bake times. It installs in the cavity to circulate hot air for improved cooking results. What it does:

• Replaces or adds the convection airflow assembly used to circulate heated air inside the cooking cavity
• Helps restore uneven baking, slow preheating, or poor browning when convection performance is reduced
• Works with the unit's existing heating elements and controls to enable convection-mode cooking
• Matches OEM fit and function for direct replacement when the original convection components fail

• Installation requires access to the oven/microwave cavity; disconnect power before servicing
• Basic mechanical skills recommended; verify power is off at the breaker to avoid electrical shock
• Follow the appliance service manual for correct placement, wiring, and testing after installation