Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Whirlpool Dishwasher Support Parts

Best Seller
Whirlpool Track, Assembly (Lh)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11259785

Note: Left Hand side

The Track, Asm (LH) is an OEM part for Whirlpool dishwashers. It is a left-hand side track assembly that supports and guides the dishwasher's upper rack as it slides in and out. This component is crucial for the smooth operation of the rack system, ensuring that dishes can be easily and securely positioned within the dishwasher. The track measures approximately 13.25 inches in length and 3.25 inches in width. 

Causes of a bad Track, Asm (LH) can include physical damage from mishandling, accumulated debris obstructing the track's pathway, or wear from frequent use which may lead to malfunction or stiffness in the rack's movement.

Symptoms of a bad Track, Asm (LH) include:

  • Difficulty pulling the upper rack in and out
  • The rack getting stuck or derailing
  • Unusual noises when the rack is moved

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Kitchenaid dishwasher top rack falling apart   Gerald S. • York , PA • February 02, 2016

Ordered numerous replacement parts. Started with the tracks which required pulling the washer out of the cabinet to reach the screws. Pushed it back in and re-secured. Then stared on the rack and replaced the rack adjusters and various clips. Everything is straight forward and easy to replace. I originally called a local repair place to have them repair it. They came out and said they needed to order parts and they would call back. A week went by and I followed up with them. Had to leave... Read more

More
$58.47
Compare At:
$70.16
You Save:
$11.69

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Track, Assembly (Rh)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11259786

Note: Right Hand side

The Track, Asm (RH) is an OEM part for Whirlpool dishwashers. It is the right-hand side track assembly that supports and guides the dishwasher's upper rack as it slides in and out. This part ensures that the rack moves smoothly and securely, allowing for easy loading and unloading of dishes while preventing disruptions during the wash cycle.

Causes of a bad Track, Asm (RH) can include wear from regular use, accumulation of debris that impairs movement, or damage from improper loading of the dishwasher rack.

Symptoms of a bad Track, Asm (RH) include:

  • Difficulty in sliding the upper rack in and out
  • The rack becoming stuck or detaching from the track
  • Noises such as grinding or clicking when the rack moves

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Kitchenaid dishwasher top rack falling apart   Gerald S. • York , PA • February 02, 2016

Ordered numerous replacement parts. Started with the tracks which required pulling the washer out of the cabinet to reach the screws. Pushed it back in and re-secured. Then stared on the rack and replaced the rack adjusters and various clips. Everything is straight forward and easy to replace. I originally called a local repair place to have them repair it. They came out and said they needed to order parts and they would call back. A week went by and I followed up with them. Had to leave... Read more

More
$56.95
Compare At:
$67.77
You Save:
$10.82

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Upper Dishrack Track
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195623

The Upper Dishrack Track is an OEM part for Whirlpool dishwashers. This component is essential for the smooth and stable movement of the upper dishrack, allowing it to slide in and out.

Causes of a bad Upper Dishrack Track can include accumulation of debris that impedes the track's function, wear and tear from regular use, or damage from overloading the dishrack, which can lead to warping or cracking.

Symptoms of a bad Upper Dishrack Track include:

  • Difficulty pulling out or pushing in the upper dishrack.
  • The dishrack becoming stuck or derailing during movement.
  • Unusual noises when moving the dishrack, such as grinding or clicking.
  • Visible signs of wear or damage to the track.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Top rack of dishwasher was falling down when pulled out   Joanne P. • Andover , MA • October 13, 2014

Replaced wheel assembly because prongs were broken and replaced track because wheel assemblies were rolling out from the track when extended. Read more

More
$52.33
Compare At:
$62.27
You Save:
$9.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Upper Spray Arm Mount
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8539324

The Upper Spray Arm Mount is an OEM part for Whirlpool dishwashers. This component serves as a crucial connection point between the upper spray arm and the water supply tube within the dishwasher. The mount is designed to ensure the spray arm is securely attached and positioned correctly to distribute water evenly throughout the dishwasher during cycles.

Symptoms of a bad Upper Spray Arm Mount include:

  • The spray arm becoming loose or falling off during operation.
  • Inadequate water distribution leading to poorly cleaned dishes.
  • Noticeable water leakage from the mount area during cycles.
  • Visible wear or damage to the mount, such as cracks or breakage.

Causes of a bad upper spray arm mount can include mechanical stress from the rotation and water pressure, material fatigue over time, or damage from impact during loading and unloading of dishes.

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

PLEASE NOTE: Shaft is angled to match the bottom side of rack and mounts directly to the rack. On older design models part number WP8268812 will no longer be used.

Do-It-Yourself Stories from Customers like You Broken upper spray arm mount assembly on my dishwasher   Keith C. • Boulder , CO • July 10, 2015

I identified the parts I would need online, shopped for price and delivery, and ordered what I needed. I bought the support arm mount assembly and decided to replace the spray arm and tube as well. Installation was straightforward, although it took me a couple of tries to get the spray arm mount oriented correctly because it is angled to allow the spray arm to miss the deeper glasses channel on one side of the upper rack in the dishwasher. After clipping the arm support and the tube support... Read more

More
$8.95
Compare At:
$10.56
You Save:
$1.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Water Supply Tube
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10340542

The Water Supply Tube is an OEM part for Whirlpool dishwashers. This part ensures that water is efficiently delivered from the dishwasher's pump to the spray arms, which then distribute the water to clean the dishes.

Causes for issues with the water supply tube often involve physical damage, such as cracks or holes, clogging from food particles or mineral deposits, and wear and tear from regular use.

Symptoms of a malfunctioning Water Supply Tube include:

  • Poor cleaning results due to inadequate water flow to the spray arms
  • Water leaking from the dishwasher if the tube is cracked or damaged
  • Unusual noises from the dishwasher, indicating issues with water distribution

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Upper basket rails were falling apart   Charles F. • Ashburn , VA • October 05, 2019

While this is a Whirlpool dishwasher, I have the Kenmore Elite version of it. I believe them to be identical for parts. A little background: The first symptom I had of problems was plastic bits from the ball bearing retainer strips in the slides falling out. Then ball bearings falling out. A common problem with this dishwasher. When disassembling the upper basket, some of the gray plastic pieces were very brittle and easily snapped off. So I ended up replacing all of the plastic pieces related... Read more

More
$67.68
Compare At:
$79.86
You Save:
$12.18

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Upper Dishrack Rail
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385089

The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes. 

Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles. 

Symptoms of a bad upper dishrack rail include:

  • Difficulty inserting or removing the upper rack smoothly   
  • Off-track movement that impacts washing coverage
  • Detached ends or segments that compromise stability

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Wheels my top dishwasher rack fell off   Paul M. • Ramona , CA • September 11, 2020

Ordered the parts and followed the instruction videos that Sears provide, Initially tried to order parts from Sears directly but the web-page kept complaining about my shipping address. Their loss- no wonder they're going out of business. Also, should note that the original assembly was plastic but the replacement was metal. Sure sign of a crappy cost-cutting decision. Overall, very happy with Appliance Parts Pros! Read more

More
$52.31
Compare At:
$62.25
You Save:
$9.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Lower Spray Arm Hub
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10077898

The Lower Spray Arm Hub is an OEM replacement part for Whirlpool built-in dishwashers. It is a central component that secures the rotating lower wash arm during the wash cycle. 

Causes of a bad lower spray arm hub involve general wear from years of repeated wash cycles. Mineral buildup accumulating inside may also deteriorate connecting surfaces over time.

Symptoms of a compromised hub include: 

  • Loose, detached lower wash arm that does not rotate properly
  • Mineral deposits or food debris caught in the hub impeding arm movement   
  • Excessive noise, clanking sounds, or vibrations emanating from the lower basket
  • Poor lower rack cleaning leaving residual food soils after wash cycles

Compatible brands also include KitchenAid, Jenn-Air, and some Kenmore built-in dishwasher models. 

Note: Also Order Spray Arm Seal: WP8268340

Do-It-Yourself Stories from Customers like You Dishes would not clean pump was working but not enough pressure operate the spray arm appeared that the pump was being "starved"   Richard K. • Katy , TX • October 21, 2014

Chopper screen was completely blocked. Chopper blades separated from the shaft. Retainer ring came off of the shaft but was able to re install the chopper assembly. Worked fine after cleaning the screen and reassembly the lower spray arm. Lower spray arm hub tab broke when removing so purchased a new one with a new bearing. Appliance Part Pros video was excellent and very helpful. Read more

More
$89.95
Compare At:
$106.14
You Save:
$16.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Lower Spray Arm Support
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268342

The Lower Spray Arm Support is an OEM replacement part for Whirlpool built-in dishwashers. Attached underneath the wash arms enclosure, this bracket securely anchors the rotating lower spray arm inside the lower dishrack.

Causes of failure involve cracking or stripping of securing clips allowing excessive movement during high-pressure spray cycles. Mineral buildup over time can also obstruct smooth operation.

Symptoms consist of:

  • Detached lower spray arm failing to thoroughly rinse lower rack dishes
  • Abnormal noises and vibrations from mobility during operation
  • Ineffective cleaning even on light soil levels
  • The lower spray arm not rotating or spinning freely during wash cycles

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

To order seal use WP8268340.

Do-It-Yourself Stories from Customers like You Machine running loud grew worse until it was obvious the motor blew a bearing   Robert S. • Bettendorf , IA • February 21, 2015

We initially noticed the dishwasher running loud and failing to completely clean dishes. Research suggested issues like this were normally caused by either the main circulation motor or the drain motor. Over the next week the noise worsened, and it became obvious that the circulation motor had went (loud whirring noise whenever the spin cycle kicked in). I watched a couple youtube videos on the removal and dissassembly until I felt confident that my wife and I could handle the project. For the... Read more

More
$49.95
Compare At:
$59.44
You Save:
$9.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Silverware Basket Holder
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10671904

The Clip is an OEM replacement part for Whirlpool dishwashers. It secures the cutlery basket in place within the dishwasher during cleaning cycles.

Causes of a bad clip can include breakage from repeated basket insertion/removal, wear and fatigue from long-term use, or warping due to heat exposure during wash cycles.

Symptoms of a bad clip include:

  • The cutlery basket not sitting flush and securely in place
  • Items shifting within the basket during washing
  • Rattling or shaking noises coming from the basket

This Whirlpool replacement clip is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

Do-It-Yourself Stories from Customers like You Broken utensil dishwasher support bracket.   Vincent M. • Richboro , PA • December 13, 2022

Ordered a part from your company. Read more

More
$10.43
Compare At:
$12.41
You Save:
$1.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Spray Arm Mount
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3385159

The Spray Arm Mount is an OEM part for Whirlpool dishwashers. This part allows the spray arm to rotate and spray water effectively to clean dishes. The mount ensures that the spray arm remains properly positioned and functions correctly during the wash cycle.

Causes of a bad spray arm mount can include wear and tear from frequent use, damage from heavy loads or improper loading of dishes, and exposure to harsh detergents and high temperatures.  

Symptoms of a bad spray arm mount include:

  • The spray arm not rotating properly
  • Poor cleaning results on dishes
  • Unusual noises during the wash cycle
  • The spray arm detaching or wobbling

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You The water parts were broken the washer is about 16 years old   Katrina M. • Fontana , CA • July 14, 2018

We bought replacement parts from you and my daughter fixed it. It is working now. It would have been nice if all the parts came in a set. Read more

More
$48.95
Compare At:
$58.74
You Save:
$9.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Upper Spray Arm Mount (Dishwasher)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268321

This replacement mount secures the dishwasher's upper spray assembly in place, keeping it aligned so it spins freely and delivers consistent water coverage to the upper rack for dependable cleaning performance.

  • Holds the up-spray/upper spray arm assembly securely inside the tub
  • Maintains proper alignment and clearance for free rotation
  • Common symptoms: upper spray arm loose or falls off, poor cleaning on the top rack, rattling from the arm striking the rack or tub, visible cracks in the mount
  • Restores stable support after a worn or broken mount
What's included: 1 upper spray arm mount. Install notes:
  • Disconnect power and water supply before servicing
  • Remove the upper rack for access; release the old mount and transfer the spray arm if attached
  • Seat and lock the new mount; verify the upper spray arm spins freely
  • Run a short test cycle to confirm proper operation

Do-It-Yourself Stories from Customers like You Upper spray arm fell off of rack   John G. • Media , PA • February 04, 2017

The upper spray arm mount on our KitchenAide dishwasher wore out, allowing the spray arm to droop into the dishes and pots in the lower rack. The replacement part was in stock and it arrived the very next day after I ordered it, with no special shipping cost. An amazing experience! The part took just 10 minutes to install--it could have taken less, but it always takes a few more minutes with a new fix. The washer is back in action, as good as new. I'm delighted with the response of... Read more

More
$53.33
Compare At:
$63.46
You Save:
$10.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Whirlpool Upper Wash Arm Support
Genuine Whirlpool part
By: Whirlpool
Part Number: W11573369

The Upper Wash Arm Support is an OEM part for Whirlpool dishwashers. It provides structure and stability to the upper wash arm as it rotates during the wash cycle. This support ensures effective spray coverage from the upper wash arm reaches all corners of the dish rack above. 

Causes of a bad wash arm support can include wear and tear from normal use over time, or damage from loading large or sharp items into the dishwasher that impact the wash arms.

Symptoms of a bad wash arm support include: 

  • The upper wash arm not rotating or spinning properly 
  • Insufficient spray pattern and cleaning from the upper arm
  • Noises or vibrations coming from the upper wash system
  • Leaks or pooling of water inside the dishwasher 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

Do-It-Yourself Stories from Customers like You My 4 year old Whirlpool dishwasher started leaking from the bottom.   Brian L. • Woodbridge , VA • March 29, 2024

I contemplated replacing it but was able to find all the parts right here and fix it within an hour. Now it works great with no leaks. I have been using AppliancePartsPros.com to maintain all my appliances as it has saved me thousands of dollars over the years. Read more

More
$23.95
Compare At:
$28.74
You Save:
$4.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Whirlpool Wash Arm Tube Holder
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378186

Dishwasher middle wash arm manifold tube holder. This holder will have a split at the 3:00 position for easy removal from the manifold tube.

Do-It-Yourself Stories from Customers like You Upper spray arm assembly broke   Edward M. • Lehighton , PA • March 22, 2020

It took about 10 minutes. I took top basket out, took pics so I could see how it was. I marked on the basket where it was, took off the assembly and put the new one on. It's working great Read more

More
$22.95
Compare At:
$27.31
You Save:
$4.36

IN STOCK
Ships Today Guaranteed
Add to Cart
Whirlpool Track
Genuine Whirlpool part
By: Whirlpool
Part Number: W10914507

The Dishrack Track (Right) is an OEM part for Whirlpool dishwashers. It is responsible for supporting the third-level dishrack and allowing it to glide in and out smoothly during the loading and unloading process. This track is designed specifically for the right side of the third-level rack. 

Causes of a bad track include damage from heavy use over time, such as dulling or bending of the metal track surface from repeated loading/unloading of dishes. Debris or residue buildup along the track can also cause issues.

Symptoms of a bad track include:  

  • Rack that will not fully extend or retract
  • Binding or sticking during rack movement  
  • Rack that will not stay positioned above

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$71.78
Compare At:
$85.42
You Save:
$13.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Whirlpool Dispenser Water Tube (Manifold), 1
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10323195

This dispenser water tube routes water from the inlet to the refrigerator's in-door dispenser manifold, helping ensure a steady, leak-free flow to the dispenser.

  • Directs water from the supply line to the dispenser manifold
  • A damaged or cracked tube can cause leaks, low/erratic dispenser flow, or air in the water line
  • Replacing a leaking tube can help restore normal dispenser operation and prevent water damage
What's included: 1 water tube/manifold piece as shown. Installation notes:
  • Unplug refrigerator and shut off water supply before service
  • Have a towel/container ready to catch residual water
  • Note tube routing and connections; push-to-connect fittings may require firm seating for a watertight seal
  • After installation, turn water on and check all joints for leaks

Do-It-Yourself Stories from Customers like You Not cleaning well, silverware very bad.   Walter M. • Labelle , FL • December 10, 2017

Replaced spray arms and tube. Found all had debris in them and prohibited water pressure from reaching items. After replacement everything comes out sparkling. Don't understand how the spray arms getting plugged. Almost like waste water is recycled. Turns out to be a very easy project and if needed AppliancePartsPro has information and directions available at your finger tips.! Read more

More
$54.95
Compare At:
$65.94
You Save:
$10.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Whirlpool Door Spring Hanger (Dishwasher)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268349

This hanger anchors the dishwasher's door-balance spring to the frame so the door opens and closes smoothly. Replacing a worn or broken hanger restores proper spring tension and helps prevent a door that drops, slams, or feels heavy.

  • Secures the door balance spring to the dishwasher cabinet/frame
  • Maintains correct spring tension for smooth, controlled door movement
  • Helps fix a door that falls open quickly or won't stay in position
  • Useful to replace when door balance hardware shows wear or damage
What's included: 1 hanger Install notes:
  • Disconnect power and shut off water before servicing; remove the toe panel/kickplate
  • Support the door and carefully relieve spring tension before removing parts
  • Slide the dishwasher out if needed for side access; transfer the spring to the new hanger and reinstall
  • Inspect the opposite-side spring/link and hinge for wear; verify door balance before reassembly

Do-It-Yourself Stories from Customers like You Upper basket wheel hubs had broken away   Mark F. • Tigard , OR • February 25, 2022

Found a great extensive list of available parts for our dishwasher model on the website. Reference to videos made the repair steps very clear and easy to follow. Read more

More
$8.05
Compare At:
$8.20
You Save:
$0.15

IN STOCK
Ships Today Guaranteed
Add to Cart

Whirlpool dishwasher replacement parts are crucial for keeping your appliance in top condition. Keeping your dishwasher in top shape is essential for a smooth-running household, and having the right parts on hand makes all the difference. These replacement parts are key to ensuring your appliance runs efficiently.

Dishwashers are a staple in many homes, saving time and effort. Whirlpool dishwasher parts are designed to maintain or restore your appliance's functionality, making them indispensable. With the proper replacement parts, you can extend the life of your dishwasher and keep those plates and glasses sparkling clean. Look for OEM replacement parts to guarantee the quality and compatibility with your specific model. These authentic components are crafted to fit perfectly, preserving the performance and reliability you expect from your Whirlpool dishwasher.

Top-quality Whirlpool dishwasher replacement parts are readily available to keep your machine humming along smoothly. Next time your dishwasher needs a little TLC, you know exactly where to turn for parts that won't let you down.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store