Need Help?
Call
Black burner cap that sits atop the gas burner base on your range. Replace if cracked, chipped, discolored, or missing to restore cooktop appearance.
I ordered the burner cap set. Read more
Venturi tube for gas range front burner. Replaces cracked, broken, or leaking tubes damaged during cleaning or stove top lifting. Essential gas supply part.
Some stoves/ovens are not suppose to be cleaned under the top! So I ordered the supply lines, from APP. I received the parts quickly, and promptly installed them. Read more
Bushing sleeve that fits inside range control knobs to reduce friction and ensure smooth turning. Replace if knob feels loose, wobbly, or damaged.
Order the knob and bushing. Fit and looked better then original knobs that came with gas range. Read more
White range door handle installs on the oven door exterior. Replaces broken, cracked, loose, or discolored handles to restore grip and appearance.
Attached new handle with screws. Read more
This burner head mounts on the cooktop and distributes gas evenly to produce a steady flame. Replacing a worn or damaged head restores proper flame pattern and helps your burner light quickly and cook consistently.
In an attempt to clean the range from the grease-gunk build-up, I had to remove the burner heads. Unfortunately, the 2 most used burner heads had immovable screws that locked them into the orifices underneath. After numerous hours in attempts to salvage the old burner heads and orifices attempting to remove the immovable screws, I gave up. Checked Maytag's website for parts and found nothing. Turned to AppliancePartsPros.com and found the correct parts for reasonable price in a matter of... Read more
White control knob for gas range burners and oven controls. Replaces missing, cracked, or broken knobs. Installs on control panel to restore functionality.
Ordered the knob and put it on ..works just fine Read more
Burner head for gas ranges and cooktops. Distributes gas evenly to create a proper flame. Replace if cracked, damaged, or clogged with buildup.
Replace your worn oven door gasket to improve heating efficiency and prevent heat loss. Restores proper seal between door and cavity. Confirm fit by model.
I replaced the old control panel with a new one. I also changed out the door seal to help prevent the control panel from going bad a second time. It was the heat from the oven getting to the keypad on the control panel that caused it to go bad. Read more
Burner not heating evenly or taking too long to boil water? This surface heating element restores proper heat output. Moderate DIY repair.
This assembly includes the motorized latch mechanism and integrated switches that lock and unlock the oven door during the self-cleaning cycle. It secures the door shut when the oven reaches high temperatures and signals the control board when the door is properly latched. Replace this part if the oven door won't lock or unlock, the self-clean cycle won't start, or you receive a door lock error code.
I knew the door latch was suppose to lock for self clean and it wasn't, so I took the back off and after tracing out wires and the linkage to the door latch, determined that it was a faulty motor on the latch lock. I got on line and Appliance Parts Pros was the first place that I found the part. I was surprised that it wasn't real expensive, but I kept looking for a cheaper price only to come back to order it from APP. I order it around 9:00 on a Thursday night and it was on my front porch... Read more
Burner won't light or clicks continuously? This spark electrode creates the arc that ignites gas at the burner. Simple DIY repair restores ignition.
Took apart the top of the stove and replaced ignitor Read more
Fix a burner stuck on high or won't adjust temperature with this infinite switch. Controls cooktop burner heat levels. DIY repair in under 30 minutes.
Replaced the Infinite Switch and that solved the problem. Did not need to replace the Surface Element Read more
Inner door glass panel for wall ovens and ranges. Replace if cracked, scratched, broken, or missing. Installs between outer door layers for visibility.
Replaced the inside glass. Read more
Controls gas flow to burners and oven by stabilizing manifold pressure. Replace if cracked, damaged, or leaking to restore proper gas regulation.
Found that the gas line did not have a dirt trap put in it. So I put one in. I think the regulator valve was not closing off. To be safe, I replaced the gas safety valve and regulator. Read more
Fix an oven door that won't stay closed or seal properly with this door strike catch. Aligns with the latch to restore firm closure. Simple hand-press install.
Everything works great, but my Jenn-Air stove is more than 15 years old and really needed a face lift. To replace it will cost about $3000.00 to replace, to replace missing and old parts around $500.00. Thankfully Appliance Parts Pros had all the parts I needed to make my stove look as good as it works. Read more
Surface burner and electrode assembly for gas ranges and cooktops. Replace when burner is cracked, electrode is broken, or ignition spark is inconsistent.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.