Need Help?
Call
Oven light not turning on when door opens? This door-activated switch detects door position and controls interior lighting. Easy push-in installation.
Secures range door panels and internal components to the cabinet frame. Replace if bracket is cracked, broken, or bent to restore proper door alignment.
Burner won't heat or heats inconsistently? This surface element restores cooking performance. Simple swap-out repair—unplug old, plug in new.
Replaced 6" burner. Read more
Burner not heating or works intermittently? This receptacle block connects the heating element to power. Typical DIY repair takes about 1 hour.
After an appliance repairman said he couldn't fix it because the cartridge was no longer available, I called AppliancePartsPros.com. Not being much of a handyman I ordered the whole 2 coil unit for a simple fix. However, after waiting on backorder for several months, it turned out to be discontinued. Another call to AppliancePartsPros.com, and Wendee D. said I could likely fix it by replacing both burner receptacles. I ordered the receptacles (which showed up the next day !), watched the... Read more
Fix burners that won't light with this cooktop igniter switch wire assembly. Restores reliable spark ignition when switches fail. Moderate DIY repair.
Replaced igniter switch harness Read more
Burner won't heat or heats unevenly? This surface heating element restores reliable heat to your electric cooktop. Moderate DIY repair in 30-60 minutes.
Replaced with new burner. Read more
Burner won't turn down from high or stays on? This infinite switch regulates heat to surface elements. Common DIY fix for overheating burners.
I immediately took the cooktop apart, found the bad part, and got the part number. I went online to AppliancePartsPros and typed in the model number, found the part and ordered it on a Sunday evening. The part arrived on Wednesday and I installed it that night and we were good to go! Read more
Color: metallic. Measures about 10 inches wide by 5 inches deep. Be sure to measure old filter before ordering. If your filter measures approx 11 1/4" x 6 1/8" use R0710163.
Replace Thermal Switch. Read more
Metal leveling leg screw threads into your range base to adjust height and stabilize the unit. Replace missing, bent, or stripped screws for level footing.
I price shopped for the missing adjuster feet for our big box discounted slide in range. Most local appliance parts suppliers want $12 - $15 per foot... I needed 3, applianceparts.com had them for 4.50 plus shipping. I saved enough to go out to eat and avoid using the new range for another day. Read more
LP gas conversion orifice kit for range top burners and oven. Includes orifices needed to convert from natural gas to propane. Essential hardware.
I removed the natural gas orífice for the top burners and the oven burner and then i set the regulator to work with LP gas. I removed the offices with a deep socket but on the front burners I had to lift the stove top up about an inch and held the assembly with a pair of channel locks because those orifices were on tight and I did not want to damage the bottom assembly by twisting them. The oven orifice was not difficult to change out, I just followed the some instructions I found on the... Read more
Restores a heat-resistant seal around your oven door. Replace when torn or damaged to maintain accurate temperatures and contain heat. Confirm fit by model.
Easy fix once I received the door gasket it clipped in perfectly. The hard part was finding the gasket for an older discontinued model range. Looked at approximately 8 different website and found the perfect information and fit at AppliancePartsPros.com. Thank you !!!!!! Read more
This square drip pan is used on gas ranges. Color: chrome. It measures about 8 inches wide by 8 inches deep.
I ordered 4 new grates along with 4 chrome top burner drip pans. They were a perfect fit and have returned an old stove to to a look of almost-new! Read more
This 250V, 1A fuse protects your washer's control circuit from overcurrent. Replacing it can restore control power once the root cause is corrected.
Lid switch problem. Easy to fix, not so easy to diagnose. First thing to look at if something goes wrong and there does not appear to overtly be mechanical issue like pump, etc. Read more
Color: Black. Instruction sheet included.
Removed rocker switch,made up jumper so the compactor could be used while awaiting replacement switch. The part came 2 days later and was installed in less tha 5 minutes. Unit working like new again. Thanks for the great service!! Read more
Outer glass frame panel for wall oven doors. Replaces cracked, chipped, or broken door glass to restore appearance and visibility while maintaining heat.
Fix gas smell or burner ignition issues with this range top burner valve. Common repair for leaking gas odor when range is off. Moderate difficulty.
I replaced the Igniter switch, two control valves and one holder/orifice (because I couldn't get the screws out and decided to just replace it rather than re-tape it and get new screws). The one thing I forgot was I have propane and the orifice was for natural gas. Fortunately, I was able to swap out the orifice from the old holder. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.