Parts for Lg WM3500CW/00: Cabinet And Control Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Excessive noise or debris inside your washer? This rear cover panel shields internal components and maintains airflow. Straightforward DIY fix.

Drum bearing bushing for washers. Installs between drum and bearing assembly. Replace if cracked, worn, or missing to restore proper drum support.

Shipping bolt assembly secures the washer drum during transport. Replace if bolts are lost, damaged, or missing before moving your washer to prevent damage.

This is the outer rear tub assembly that includes the bearing for a front-load or top-load washing machine. It supports the inner drum and allows it to spin smoothly during wash and spin cycles. Replace this assembly if you hear loud rumbling or grinding noises during the spin cycle, notice water leaking from the rear of the tub, or the drum wobbles excessively.

Secures washer drum during moving or transport. Immobilizes internal components to prevent damage. Replace if missing, lost, or needed for relocation.

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

The display circuit board assembly is the electronic control panel that powers the touchpad, indicator lights, and digital readouts on the front of your appliance. It receives your input and communicates settings to the rest of the appliance's control system. Replace this board if the display is blank or flickering, buttons are unresponsive, or the wrong temperatures and settings are being shown.

Mounts inside the washer drum to lift and tumble clothes during the wash cycle. Replace if cracked, broken, or missing to restore proper agitation.

Mounts the door hinge to your washer's front cabinet. Replace if bracket is bent, broken, or missing to restore proper door alignment and sealing.

Spider arm assembly connects the wash basket to the drive shaft in front-load washers. Replace if cracked, corroded, or broken to restore drum support.

Machine screw that fastens brackets, panels, or housings in select washers. Replace when missing, stripped, or damaged to restore secure assembly fit.

The Bearing Ball is an OEM part for LG washing machines. This component plays a crucial role in the smooth operation of the washer drum, enabling it to rotate quietly and efficiently during the wash and spin cycles.

Causes of a bad bearing ball can include regular wear and tear, exposure to heavy loads, or insufficient lubrication. Over time, these factors can lead to deterioration and reduced performance of the bearing ball, potentially causing the washer drum to spin improperly or not at all.

Symptoms of a bad bearing ball include:

• Loud rumbling or grinding noises during the wash or spin cycles
• The drum not spinning or spinning unevenly
• Increased vibration or movement of the washer
• Leaks from the drum area due to damaged seals

This OEM LG part is also compatible with Sears/Kenmore models.

Supports smooth drum rotation in your washer. Replace if you hear loud roaring or grinding noises during spin cycles. Confirm fit with your model number.

Washer won't spin or makes grinding noises? The motor rotor bolt secures the rotor to the motor shaft. Requires a 17mm socket for installation.

Seals the rear tub to prevent water leaks during wash and spin cycles. Replace if you notice leaking or bearing noise. Confirm fit with your model.

Replace a cracked or broken washer balance weight. This concrete counterweight attaches to the drum to stabilize during spin cycles. Order now.

Replacement cabinet cover for your washer. Installs on the exterior to enclose internal components. Order a new cover if yours is cracked, damaged, or missing.

This Screw (drawing) is a factory fastener used to secure appliance panels and components. Replacing a stripped, corroded, or missing screw restores a tight fit, reduces vibration, and helps keep assemblies correctly aligned.

• Secures panels, brackets, and mounting points as specified by the manufacturer
• Replaces screws that are lost, damaged, corroded, or stripped
• Helps address rattling, vibration, or loose-fitting parts caused by missing hardware
• Maintains proper alignment and stability of the assembly

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to its original location; start threads by hand to avoid cross-threading
• Use the correct driver; tighten snugly without over-torquing into metal or plastic
• Refer to your model's parts diagram to correct location and quantity

Secures the outer door boot seal to prevent water leaks. Replace if damaged, rusted, or losing tension. Includes tensioning spring. Verify fit.

Fix excessive vibration and loud spinning with this washer balance weight. Stabilizes the tub assembly to reduce shaking and noise during spin cycles.

This hinge bracket secures the appliance door hinge to the cabinet, restoring correct door alignment and reliable opening/closing. Replace a cracked or bent bracket to stop door sag, rubbing, or uneven sealing. What it does

• Secures the hinge assembly to the cabinet frame so the door mounts firmly and stays aligned.
• Prevents door sag and misalignment that can cause sticking, rubbing, or poor door sealing.
• Restores proper pivoting action for smooth opening and closing.
• Helps maintain correct door position to avoid stress on hinges and surrounding trim.

• Disconnect power to the appliance before starting and remove any items from the door.
• Support the door while removing and installing the bracket to prevent it from dropping.
• Use the correct screwdriver or socket; tighten fasteners snugly but avoid over-torquing.
• If the hinge or mounting hardware is damaged or excessively worn, replace those parts as well for a secure repair.

Tub cover for your washer. This plastic cover mounts to the outer tub assembly. Replace if cracked, broken, or missing to protect internal components.

Fix intermittent power issues, unresponsive controls, or component failures with this multi wiring harness. Restores electrical connections in washers.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

Seals between front and rear outer tubs to prevent water leaks during wash cycles. Replace if you notice leaking or during bearing replacement. Confirm fit with your model number.

This is a replacement screw used to secure internal components and assemblies. It restores proper fastening when original screws are stripped, loose, or missing. What it does

• Secures panels, brackets, or small assemblies to prevent rattling and misalignment
• Restores proper fit when original fasteners are worn, stripped, or lost
• Helps stop vibration-related noise from loose parts
• Matches OEM fastening locations and thread style for intended application

• Screw as shown

• Unplug the appliance or disconnect power before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or crack plastic
• Keep small parts away from children and dispose of damaged fasteners

Secures the stator to the motor assembly in your washer. Replace if bolt is stripped, spinning freely, or missing to restore proper motor stability.

Fix washer control errors, intermittent power, or non-working components with this wiring harness. Restores reliable electrical connections and function.

Complete washer door assembly replaces damaged or warped doors to restore proper sealing and appearance. Confirm fit with your model number before ordering.

This outer door frame replaces the exterior trim around a refrigerator door to restore appearance and proper sealing. It helps protect the door edge and provides a finished look after damage or wear. What it does:

• Replaces a cracked, dented or worn outer door frame to improve door fit and appearance
• Restores the exterior trim that helps position the door gasket and maintain a proper seal
• Stops drafts and visible damage caused by impacts or aged components
• Matches OEM fit and attachment points for straightforward replacement

• Installation requires removing the interior door panel and disconnecting any attached wiring or components; keep fasteners organized
• Handle and trim hardware may need temporary removal to access mounting screws
• Inspect and clean the gasket contact area before reassembly to ensure a proper seal
• Disconnect power and follow the refrigerator manufacturer's service instructions to avoid injury

This replacement handle provides a sturdy grip for opening and closing your appliance door, restoring safe and convenient access. It matches OEM form and mounting points for a factory-fit feel. What it does:

• Replaces a damaged, cracked or loose door handle to restore normal operation and grip
• Secures to the door using factory mounting points to maintain original alignment
• Prevents further wear to door trim by restoring proper handle function
• Fits the specific OEM handle location to keep the original appearance

• One replacement handle

• Disconnect power to the appliance before beginning any repair to prevent injury
• Follow the appliance's service manual for door removal or partial disassembly if required
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• If mounting clips or screws are missing or damaged, replace them with OEM-specified hardware

Washer door won't close or latch securely? This door strike ensures proper door closure for safe operation. Easy DIY fix for common latch issues.

Secures components in correct position inside your washer. Replace if cracked, broken, or worn to restore proper support and alignment for reliable operation.

Washer won't fill or water keeps running? This inlet valve assembly controls water flow into your washer tub. Common fix for fill issues.

The Hot Water Valve is an OEM part for LG washing machines. It regulates the flow of hot water into the wash tub during the appropriate cycles. The valve allows hot water to enter the wash tub to help wash clothes thoroughly and effectively at warmer temperatures.

Causes of a bad hot water valve include mineral or lime buildup inhibiting proper operation, worn internal components due to age and use, or damage from freezing during winter months.

Symptoms of a bad hot water valve include:

• Only cold water entering the wash tub, even on hot cycles
• Fluctuating hot water temperature during cycles
• Leaks from the hot water valve area
• Inability to select hot water temperature settings

This LG part is also compatible with some Kenmore models.

This kit includes the bushing components that fit into the door hinge assembly on a front-load washer. The bushings reduce friction and allow the door to pivot smoothly when opening and closing. Replace this kit if the washer door feels loose, sags, makes grinding or squeaking noises, or no longer aligns properly with the door latch.

The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.

Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism. 

Symptoms of a bad Float Assembly include:

• Water overflowing from the washing machine
• Inadequate water levels that affect the washing cycle's effectiveness
• The washing machine failing to start the fill cycle due to a malfunctioning float switch

This OEM LG part is also compatible with some Kenmore models.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

A replacement lower housing that restores the appliance's base support and alignment. Replaces a damaged or cracked cabinet base to help reduce instability and provide a secure mounting surface for internal components. What it does:

• Provides the lower structural support for the appliance cabinet and internal assemblies
• Restores proper alignment of outer panels and access openings
• Helps reduce excessive vibration or instability caused by a broken or warped base
• Keeps internal components mounted securely to prevent rubbing or misalignment

• One cabinet base assembly

• Disconnect power and water before beginning any service
• Remove outer cabinet and support the drum/tub before removing the old base
• Handle sharp sheet-metal edges and mounting hardware carefully

Fix LE error code or washer won't spin issues with this stator assembly. Common repair for motor lock problems. DIY-friendly, typically installed in 30 minutes.

Mounts to the washer's lower frame to secure components and maintain alignment. Replace if bracket is cracked, broken, rusted, or missing hardware.

Fix unresponsive buttons or blank display with this washer control panel assembly. Restores touch controls and front-panel operation. Moderate DIY repair.

This knob assembly is the replacement rotary control used to select settings on the appliance. It restores a worn, cracked, or missing knob to make dialing controls easy and accurate again. What it does:

• Replaces a damaged or missing control knob so you can select cycles, temperatures, or settings
• Provides a secure grip and tactile detents for reliable user control
• Helps stop slipping or loose operation caused by worn knobs or stripped splines
• Restores the appliance's original look and usability

• Turn off and unplug the appliance (or disconnect power) before replacing the knob.
• Pull the old knob straight off the control shaft; push the new knob onto the shaft until it seats.
• If the knob does not fit, do not force it—verify spline alignment and part compatibility.

A replacement drawer front panel that restores the appearance and function of a damaged or cracked refrigerator drawer. Fits the OEM drawer assembly to provide a secure, finished front and grip surface. What it does:

• Replaces a cracked, dented, or scratched drawer front to restore cabinet appearance
• Provides the built-in grip/handle area for opening and closing the drawer smoothly
• Secures to the drawer box to help maintain proper alignment and closure
• Helps prevent food spillage by restoring the drawer front seal and fit

• Remove all contents from the drawer before beginning; support the drawer box while detaching the front
• Use basic hand tools; avoid forcing clips—work gently to prevent breakage
• Inspect mounting clips and screws; replace any damaged hardware for a secure fit
• Follow OEM instructions where available; wear gloves to avoid sharp edges

Replace a broken, rusted, or missing leveling leg assembly. Installs at the base to stabilize your washer, reduce vibration, and adjust height.

Fix leaking from under the detergent dispenser with this washer dispenser box. Solves cracks or breaks that compromise the dispenser structure.

Washer case housing component. Replaces cracked, damaged, or missing case parts. Essential structural element for proper appliance assembly.

This is the dispenser drawer housing assembly for a front-load or top-load washing machine. It holds the detergent, bleach, and fabric softener compartments and directs water through them during the wash cycle. Replace this assembly if the dispenser drawer is cracked, leaking, or if detergent and additives are not being properly dispensed into the drum.

This washer cover cap installs on the exterior cabinet or panel to conceal screw holes and mounting hardware. Replace if cracked, broken, or missing.

Fix TE error code on your washer with this thermistor assembly. Monitors water temperature during wash cycles. DIY-friendly repair with video guide.

Connects detergent dispenser to washer tub. Replace if cracked, leaking, or clogged with detergent buildup. Verify fit with your model number.

Seals the temperature sensor where it passes through the washer tub. Replace if worn or leaking to prevent water damage. Confirm fit with your model.

Rubber door boot bellows assembly that seals the washer drum to the front panel. Replace if torn, cracked, leaking, or shows mold buildup around the seal.

Replace your washer's water inlet hose if cracked, kinked, or leaking. This hose connects your water supply to the washer inlet valve for proper fill.

Directs water from inlet valve to detergent dispenser in LG washers. Replace if hose is cracked, leaking, won't stay attached, or damaged from wear.

This inlet hose routes incoming water from the washer's fill valve into the machine to support proper filling. Replace a cracked or leaking hose to stop drips, prevent water damage, and restore reliable fill performance.

• Directs incoming water from the fill valve to the dispenser/tub during wash cycles
• Maintains a sealed path to prevent internal or external leaks
• Helps the washer reach proper fill levels and timing
• Common symptoms of failure: water on the floor, leaks during fill, visible cracks or bulges, long/no fill or IE error

• Unplug the washer and turn off both hot and cold water supplies
• Keep towels or a pan handy; relieve residual water pressure before disconnecting
• Note the original routing; fully seat the hose on fittings and secure with existing clamps
• Restore water and power, then run a quick fill to check for leaks

Fix LE error codes or grinding noises during spin with this washer rotor assembly. Pairs with stator to drive drum rotation. DIY repair in 30 minutes.

Washer won't fill properly or overfills? The pressure switch monitors water levels and signals when to stop filling. Moderately easy DIY repair.

Suspension spring supports and stabilizes the washer tub during wash and spin cycles. Replace if broken, snapped, or stretched to restore proper operation.

Fix a washer that won't power on with a new power cord assembly. This 3-prong cord connects your washer to household electricity. Easy DIY repair.

The Pump Hose is an OEM replacement part for LG washing machines. It is a flexible tube that connects the pump assembly to the internal tub and spins through the detergent dispenser area. The pump hose is responsible for circulating and removing water during the wash and rinse cycles. 

Symptoms of a bad pump hose include:

• Leaks or water not fully draining from the washer 
• Slow or inefficient filling and draining of water  
• Pump running loudly or continuously
• Wet areas under or around the washer

Causes of failure can be cracks or splits developing in the tubing from repeated bending and flexing over time, or blockages restricting water flow.

It is also compatible with some Kenmore models.

Replace a worn washer door hanger assembly pivot to restore proper door alignment and smooth operation. Ensures the seal closes correctly. Verify fit.

Fix a washer that won't start, complete cycles, or respond to controls with this main PCB assembly. Manages all functions and cycles in your machine.

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

Secures hose connections to prevent leaks in your washer. Replace if corroded, rusted, or leaking around hose fittings. Confirm fit by model number.

Secures washer hoses to pumps, tubs, and drain fittings to prevent leaks. Replace when weakened, rusty, or damaged to maintain tight connections.

Fix washer leaks with this hose clamp. Secures hoses to pumps and valves, preventing water leaks and disconnections during wash cycles. Simple repair.

Door boot seal creates a watertight barrier between drum and door. Replace when leaking, torn, or moldy. Verify fit with your model number before ordering.

Fix water leaking from your washer dispenser or misdirected flow with this dispenser water guide channel. Routes water properly to prevent splashing.

Replacement tub to pump hose for washers. Transports water from the wash tub to the drain pump. Replace if cracked, split, leaking, or damaged from wear.

Secures the door boot seal to prevent leaks during wash cycles. Replace if corroded, loose, or if water leaks from the door area. Confirm fit with model.

Pressure sensor air chamber for washers. Connects the tub to the water level switch. Replace if cracked, clogged with detergent residue, or leaking air.

Replace your washer's drain hose if cracked, leaking, or damaged. Connects the pump to the standpipe for proper water drainage during wash cycles.

Joins two internal water lines in your washer. Replace this coupler if cracked, worn, or leaking to restore a secure connection during fill and wash cycles.

Fix excessive vibration, banging during spin, or washer walking across floor. This damper assembly controls drum movement. Moderate DIY repair.

Replace your washer's door hinge if it's cracked, broken, or causing the door to sag. This hinge secures the door panel to the cabinet frame for proper alignment.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.