Parts for Lg LSFD2491ST/01: Case Parts

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

This replacement screw secures specified panels or components inside your appliance. Refreshing worn or missing hardware helps restore a tight fit, reduce rattling, and keep assemblies properly aligned for reliable performance.

• Provides secure fastening for brackets, panels, or internal assemblies
• Replaces stripped, rusted, or lost hardware
• Helps reduce vibration and rattling noises
• Symptoms include loose panels, shifting components, or a screw that won't tighten

• Disconnect power and allow any hot surfaces to cool before servicing
• Wear cut-resistant gloves and eye protection
• Match length and thread to the original; replace like-for-like
• Start threads by hand to avoid cross-threading; do not overtighten

This is a replacement mounting bolt used to secure appliance components and assemblies, restoring proper fit and reducing movement that can cause noise or misalignment. Use when a factory fastener is missing or damaged. What it does

• Fastens panels or internal components to maintain correct alignment and structural integrity.
• Prevents vibration-related noise and rubbing by holding parts securely in place.
• Restores secure connections after disassembly for service or repair.
• Helps eliminate intermittent movement that can lead to wear or leaks when a fastener is compromised.

• Use the correct bolt length and thread engagement for the application; do not force a mismatched fastener.
• Tighten to snug, manufacturer-specified torque when available; avoid overtightening to prevent stripping.
• Inspect surrounding parts (washers, nuts, threaded holes) and replace if worn or damaged.
• Disconnect power and follow all safety precautions before servicing the appliance.

This screw is a direct-fit replacement fastener that secures panels, brackets, and internal components. Replacing a missing or stripped screw helps stop rattling and keeps parts aligned for reliable operation. What it does:

• Secures panels, trim, brackets, or internal components to restore proper fit
• Replaces missing or damaged hardware that can cause rattling or loose parts
• Restores alignment so doors, shelves, or assemblies operate smoothly
• Provides a straightforward hardware fix without replacing larger assemblies

• Use the matching screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until seated to avoid damaging threads or plastic parts
• Disconnect power or follow appliance safety instructions before servicing electrical areas
• Keep removed hardware organized and save any damaged parts for inspection

This replacement mounting screw secures appliance panels and components to restore proper fit and reduce rattling or loose parts. Simple, direct replacement when a worn or missing screw causes loose panels or intermittent contact. What it does:

• Fastens panels, brackets, or small components to maintain proper alignment and reduce vibration
• Prevents loose trim, covers, or assemblies that can cause noise or improper sealing
• Replaces missing, stripped, or corroded screws that interfere with reliable operation
• Works wherever the OEM screw specification is required for secure mounting

• Use the matching screw hole and tighten until snug; avoid over-torquing to prevent stripping
• Disconnect power to the appliance if accessing electrical or moving parts near the work area
• If multiple screws are missing or panels are damaged, replace all fasteners for even support

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

This is a replacement screw used to secure appliance panels, trim, and small components so damaged or missing fasteners don't leave parts loose. It restores proper fit and reduces rattling and movement. What it does:

• Secures panels, trim pieces, or internal components to restore proper fit
• Stops panels from shifting or vibrating during use
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Helps eliminate rattling noises caused by loose fasteners

• One replacement screw as pictured

• Unplug the appliance or shut off power before installing
• Use the correct screwdriver or bit to avoid stripping the head
• Hand-start the screw, then snug—do not overtighten to avoid cracking plastic parts
• If screw threads are damaged, replace with the exact OEM screw to ensure proper fit

This rear door handle replaces a worn or damaged handle on compatible LG appliances, restoring a secure grip and smooth opening. It's a direct-fit exterior handle that keeps the appliance door operating and looking right. What it does

• Provides a secure gripping point to open and close the appliance door
• Replaces cracked, loose, or broken rear handle hardware
• Restores correct alignment and feel when the door is operated
• Helps prevent further damage to the door edge from makeshift handles

• Power off and unplug the appliance before starting work; remove food or shelves as needed for access
• Keep fasteners and mounting clips; transfer original hardware unless new hardware is explicitly included
• Test door operation and alignment after installation; tighten fasteners evenly to avoid stress

The Drain Pipe Assembly is an OEM replacement part for LG refrigerators. It is a plastic tubing system that collects and removes liquid condensation from evaporator coils. Proper drainage is crucial to minimizing frost buildup and ensuring optimal cooling of food storage areas. 

Symptoms of a bad drain pipe assembly include:

• Excessive frost or ice accumulation inside the refrigerator
• Puddling or leaks detected near evaporator housing
• Slow draining allowing water to pool versus emptying fully
• Cracks or breaks in the tubing prevent complete fluid removal

Causes are typically mineral sediment clogging drainage paths or deteriorating plastic from constant use. This OEM LG replacement pipe restores reliable condensate removal to maintain peak efficiency.

This OEM LG part is also compatible with Sears/Kenmore. 

The Leveling Leg is an OEM part for LG refrigerators. It is one of the four legs at the bottom corners that elevate and provide stability to the entire appliance.

Causes of failure can be broken mounting points that no longer provide secure elevation, full compression of the built-in cushioning, or damage from impact on an unlevel floor.

Symptoms of a faulty leveling leg include:

• Excessive shaking or vibrating of the refrigerator
• Door alignment issues where doors are difficult to open or close fully
• Visible leaning or misalignment of the refrigerator cabinet

This OEM LG part is also compatible with some Kenmore models.

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

This is a customized screw used to secure components in LG appliances. It replaces a worn or missing fastener to restore proper assembly and reduce rattling or loose panels. What it does:

• Secures panels, brackets, or small components in the appliance chassis
• Helps stop vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to restore safe, stable assembly
• Matches OEM fit for the specific mounting point it was made for

• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or parts
• Disconnect power and follow appliance-specific safety procedures before servicing

This multi-outlet vent duct directs exhaust air from the appliance to the home venting system, restoring proper airflow and reducing cooking odors and excess heat. Replaces a damaged or leaking duct to improve ventilation performance. What it does:

• Channels exhaust air from the appliance to the ventilation outlet
• Prevents leaks that can cause poor ventilation, odors, or heat buildup
• Helps reduce rattling or whistling caused by damaged ducting
• Works with the appliance's blower to maintain proper airflow

• Turn off power to the appliance and unplug before beginning work
• Handle sheet-metal edges carefully; wear gloves to avoid cuts
• Use basic hand tools;

This is an air duct and evaporator cover with fan that is used in refrigerators. This part makes up the back wall of the refrigerator and is used to channel cold air into the refrigerator. It also protects the evaporator. It includes the fan, which circulates cold air throughout the appliance. If any of these parts are damaged, the refrigerator may get too hot or make squealing noises.Before replacing the air duct and evaporator cover with fan, make sure that any food that could go bad while the refrigerator is unplugged has been placed in a cooler or other cold location. Disconnect the refrigerator from power once food has been safely stored. While making the replacement, make sure to wear a pair of work gloves for safety.The air duct and evaporator cover with fan is made to be compatible with a series of refrigerators by LG. It is sold individually and sourced straight from the manufacturer. The component is an authentic OEM replacement part.

A replacement freezer tray that restores a level, secure surface for frozen foods and helps contain spills in the freezer compartment. Fits where the factory storage pan has cracked, warped, or failed. What it does:

• Provides a flat, durable surface to hold frozen foods and packages
• Contains minor spills to help keep the freezer interior cleaner
• Replaces cracked, warped or broken freezer pans that no longer seat properly
• Helps maintain organized storage and prevents items from shifting

• Disconnect power to the appliance before any service to avoid electrical hazards
• Remove food, shelves, and drawers that block access to the tray area
• Slide or snap the tray into place; do not force—verify it seats securely and level

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

The Drawer Tray Assembly is an OEM part for LG French door refrigerators. It consists of the removable tray and frame that make up the refrigerator's freezer drawer storage compartment. The tray assembly is designed to provide organization and easy access to frozen items tucked away in the bottom drawer.

Symptoms of a bad drawer tray assembly include:

• Difficulty opening or closing the freezer drawer  
• Noisy drawer operation
• Cracked or broken tray ledges
• Poor seal allowing cold air leakage

Causes can be normal wear and tear over time, or damage from accidentally dropping heavy items or forcing a stubborn drawer.

This genuine LG tray assembly is also compatible with some Kenmore French door freezers.

This replacement drawer tray assembly restores a refrigerator's lower storage drawer so food stays organized and supported. Durable molded tray snaps into the drawer housing to replace cracked, warped, or missing trays. What it does:

• Supports and contains fresh foods in the refrigerator drawer for organized storage
• Replaces damaged, cracked, or warped trays that can cause unstable items or food contact with drawer floor
• Helps maintain smooth drawer seating and alignment when the tray is properly installed
• Fits into the drawer housing and works with the existing slide/track components

• Remove contents and fully empty the drawer before replacing the tray
• Lift the drawer from its tracks, then snap the tray into the housing or replace and re-seat the drawer
• Use care to avoid sharp edges; wear gloves if needed and disconnect power if accessing electrical components nearby
• Only use manufacturer's replacement parts

This replacement drawer tray assembly restores a refrigerator's lower storage drawer so food stays organized and supported. Durable molded tray snaps into the drawer housing to replace cracked, warped, or missing trays. What it does:

• Supports and contains fresh foods in the refrigerator drawer for organized storage
• Replaces damaged, cracked, or warped trays that can cause unstable items or food contact with drawer floor
• Helps maintain smooth drawer seating and alignment when the tray is properly installed
• Fits into the drawer housing and works with the existing slide/track components

• Remove contents and fully empty the drawer before replacing the tray
• Lift the drawer from its tracks, then snap the tray into the housing or replace and re-seat the drawer
• Use care to avoid sharp edges; wear gloves if needed and disconnect power if accessing electrical components nearby
• Only use manufacturer's replacement parts

This drawer tray assembly is the platform that supports a refrigerator storage drawer and guides it along the slides. Replacing a cracked or damaged tray restores smooth operation, proper alignment, and dependable support for your food items.

• Supports the drawer bin and its contents inside the compartment
• Interfaces with the slide/rail system for smooth in-and-out travel
• Helps maintain proper alignment so the drawer opens and closes fully
• Common symptoms: cracked or broken tray, broken tabs, wobbling drawer, sticking/binding, or difficulty closing

• Disconnect power and empty the drawer before service
• Remove the drawer per your model's instructions; release tabs or screws securing the tray
• Position the new tray, ensuring tabs/rollers seat correctly; reinstall any fasteners
• Reinstall the drawer and check for smooth travel before reloading

The Drawer Tray Assembly is an OEM part for LG French door refrigerators. It consists of the removable tray and frame that make up the refrigerator's freezer drawer storage compartment. The tray assembly is designed to provide organization and easy access to frozen items tucked away in the bottom drawer.

Symptoms of a bad drawer tray assembly include:

• Difficulty opening or closing the freezer drawer  
• Noisy drawer operation
• Cracked or broken tray ledges
• Poor seal allowing cold air leakage

Causes can be normal wear and tear over time, or damage from accidentally dropping heavy items or forcing a stubborn drawer.

This genuine LG tray assembly is also compatible with some Kenmore French door freezers.

This shelf assembly replaces a damaged or worn shelf to restore stable storage and organization inside the refrigerator. It provides a secure, level surface for food containers and helps maintain efficient use of interior space. What it does:

• Replaces a cracked, chipped or missing shelf to prevent spills and support refrigerated items
• Restores proper shelf spacing and weight support for everyday food storage
• Helps eliminate rattling or misalignment caused by a broken shelf assembly

• Remove food and unplug the refrigerator or disconnect power before starting
• Slide out the old shelf, lift to clear support rails, and position the new shelf into the same supports
• Handle carefully if the shelf is glass; use gloves and place on a padded surface during install
• Check support rails for damage or debris before forcing into place

This is a refrigerator glass shelf that supports food items and helps organize storage space. Replacing a cracked or missing shelf restores safe storage capacity and prevents spills from dripping to lower sections.

• Provides a flat, sturdy surface for refrigerated items
• Helps contain leaks from spills to the shelf area
• Replace if the glass is cracked, shattered, sagging, or missing
• Can also help reduce rattling or uneven placement of items

• Unplug the refrigerator or switch off power before servicing
• Remove food items and lift out the old shelf carefully to avoid injury from broken glass
• Handle the new glass with clean, dry hands; avoid edge impacts
• Ensure the shelf seats fully in the frame/slots before reloading items

This rail holder secures a slide/rail assembly so a shelf or drawer tracks smoothly and stays in place. It restores proper support and alignment for the rail to prevent sagging or detachment. What it does:

• Retains and supports the rail or slide so the drawer/shelf tracks correctly
• Prevents the rail from slipping out or disconnecting during use
• Restores stable operation when a mounting point is cracked or worn
• Common symptom: drawer or shelf falls, slips, feels loose, or rattles

• One rail holder

• Disconnect power and remove contents from the area before starting
• Installation may require basic tools (screwdriver); keep fasteners from the original part
• Handle nearby shelves, glass, and sharp edges carefully to avoid damage or injury

This guide assembly restores smooth, stable sliding for a freezer/refrigerator drawer or shelf track so drawers open and close without catching or falling out of alignment. It replaces worn or broken rails that cause noisy or rough operation. What it does

• Provides the sliding track and mounting interface that guides a drawer or shelf along its travel
• Replaces cracked, bent, or worn rail sections that cause sticking, misalignment, or dropped drawers
• Restores proper engagement so drawers slide smoothly and stay securely supported
• Helps eliminate scraping, grinding, or noisy movement from damaged guide hardware

• One guide assembly

• Disconnect power to the appliance before servicing to avoid injury
• The part number matches the existing rail before installation
• Basic hand tools are typically required; keep fasteners for reuse unless replacement provided
• Follow OEM instructions for removal and reassembly to ensure correct alignment and function

This rail guide assembly restores smooth, stable sliding for a refrigerator or freezer drawer. It supports the drawer track so the drawer opens and closes without sticking, binding, or misaligning. What it does:

• Guides and supports the drawer on its track for consistent movement
• Keeps the drawer aligned to prevent binding and uneven wear
• Reduces noise and rough operation caused by a damaged or worn rail guide
• Helps prevent the drawer from coming off the track during normal use

• Disconnect power to the appliance and remove the drawer per the manufacturer's instructions before installing
• Inspect surrounding track and mounting points; replace any broken clips or fasteners
• Hand-fit the guide first, then secure hardware without over-tightening to avoid cracking plastic parts
• Test drawer travel after installation to ensure smooth, full-range movement

This rail connector secures a slide rail to its mounting point, keeping the rail aligned and stable so the assembly moves smoothly. Replace a cracked, worn, or missing connector to restore proper tracking and support.

• Joins the slide rail to its bracket or panel to maintain alignment and support
• Helps the rail travel smoothly without binding or coming off track
• Replaces broken, warped, or missing connectors that allow rails to loosen
• Typical signs of failure: rail separates, wobbles, sags, or won't stay engaged

• Disconnect power to the appliance; remove items to access the rail safely
• Remove the drawer/shelf and rail as needed to reach the connector
• Release locking tabs or fasteners, transfer the rail to the new connector, and seat it fully
• Reinstall components and test for smooth travel; wear gloves to protect hands from sharp edges

This connector joins two sections of the refrigerator's water tubing to create a secure, leak-resistant seal. Replace a cracked or loose connector to restore proper water flow to the dispenser and ice maker.

• Provides a sealed union between two water tubes in the appliance's water system
• Helps prevent air and water leaks that can impact dispenser and ice maker performance
• Typical failure signs include drips or puddles near the connection, visible seepage, or moisture alerts
• Also causes low/no dispenser flow or small or hollow ice cubes

• Disconnect power and shut off the water supply; dispense water to relieve line pressure
• Prepare tubing with a clean, square cut; insert each tube fully into the connector until seated, then pull-test to retention
• Restore water and check all joints for leaks; purge air by dispensing water before normal use

This slide rail supports and guides a refrigerator drawer so it opens and closes smoothly. Replacing a worn or cracked rail restores proper alignment and glide to prevent bins from binding, tilting, or popping out of the track.

• Provides the track the drawer/bin slides on
• Maintains drawer alignment and supports the bin during use
• Helps ensure smooth, even travel in and out
• Common failure signs: drawer hard to open/close, crooked or sagging bin, drawer comes off track, visible cracks or damage to the rail

• Disconnect power and remove the affected drawer/bin before starting.
• Remove screws securing the old rail; install the new rail in the same position and orientation.
• Transfer any reusable stops/caps from the original rail if applicable.
• Reinstall the drawer and verify smooth operation before reloading.

This Fresh Room tray assembly is the shallow refrigerator bin for deli-style items. It replaces a cracked or missing bin to restore organized storage, a proper fit, and easy access in the Fresh Room compartment.

• Provides a dedicated Fresh Room area for organizing small perishables
• Fits the factory supports/rails in the Fresh Room compartment
• Restores proper fit when the original bin is cracked, chipped, or broken
• Common symptoms: bin falls out, won't stay seated, binds, or is missing

• Empty the compartment and remove the original tray/bin
• Inspect rails/supports for obstructions or damage before installing
• Seat the new tray evenly in both supports and slide/position fully without forcing
• Disconnect power if working near interior lights; handle plastic carefully to avoid stress cracks

This holder assembly bracket secures and aligns a small appliance component so it stays in place during normal use, restoring reliable fit and reducing noise or movement caused by a loose part. What it does

• Provides a stable mounting point for the associated component to prevent shifting or detachment
• Restores correct alignment for doors, panels, or internal modules that rely on the bracket
• Helps stop rattling, vibration noise, or intermittent contact caused by a broken or bent bracket
• Supports safe operation by keeping parts properly positioned within the appliance

• Basic hand tools are usually all that's required; follow the appliance service manual for access steps
• Disconnect power (and water, if applicable) before starting any repairs to avoid shock or injury
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws or damaged clips for a secure fit

Replacement tray cover assembly that restores the dispenser tray's function and appearance. Helps contain spills and keeps debris out of the tray area for cleaner operation and easier maintenance. What it does:

• Covers the dispenser/drip tray to contain spills and prevent debris buildup.
• Helps direct liquids into the tray and away from internal components.
• Commonly replaced when the cover is cracked, warped, broken, or missing.
• Can improve appearance and reduce odors caused by trapped residue.

• Follow the manufacturer's service manual for exact removal and replacement steps.
• Disconnect power and water before servicing nearby components.
• Use gentle prying to release clips; avoid excessive force to prevent damage.
• Inspect mating clips and support features; replace any broken fasteners before installing.

Note: Center Vegetable Tray

The Tray Assembly, Veg (RH) is an OEM part for LG refrigerators. It is designed to store vegetables and other fresh produce in the refrigerator, helping to keep them organized and fresh. This right-hand side tray fits securely into the designated slot within the refrigerator, providing easy access and optimal storage conditions for produce.

Causes of a bad tray assembly can include cracks or breaks from heavy items being placed in it, damage from accidental impacts, or general wear and tear over time. If the tray is damaged, it may not hold items securely or fit properly in the refrigerator.

Symptoms of a bad tray assembly include:

• Cracks or splits in the plastic
• The tray not staying securely in place
• Difficulty sliding the tray in and out
• Items falling out or the tray sagging

This OEM LG part is also compatible with Sears/Kenmore.

The Left Vegetable Crisper Tray Assembly is an OEM part for LG refrigerators. Located on the left interior side of the fresh food compartment, it provides a specialized storage compartment optimized for fruits and vegetables.

Causes of a bad vegetable crisper tray can include cracks or fractures in the plastic developing over extended use. Hinge or sliding mechanisms may also wear out with regular opening and closing motions.

Symptoms of a bad Vegetable Crisper Tray Assembly include:

• Difficulty fully extending or retracting the tray in and out of its track
• Irreparable cracks that render the tray unstable or non-functional
• Vegetable bruising from a tray that no longer smoothly slides or supports
• Potential leakage if tray sealing integrity is compromised

This OEM LG part is also compatible for some Kenmore models.

Restore the interior of your refrigerator with this T/V cover assembly. It covers the temperature-variable (T/V) section and helps direct airflow in the fresh food compartment, protecting components and maintaining a clean, finished appearance for consistent performance.

• Covers and protects the T/V section/duct inside the fresh food compartment
• Helps guide airflow to the T/V area as designed by the manufacturer
• Replaces cracked, warped, or missing panels to restore proper fit and function
• Common signs to replace: broken tabs, loose or rattling panel, uneven cooling around the T/V area

• Disconnect power before servicing
• Clear the shelf area and remove adjacent drawers or trim as needed
• Release retaining screws or clips and lift out the old cover carefully
• Seat the new cover evenly on its supports; ensure vents/slots align and the panel locks into place before restoring power

This guide assembly is a replacement plastic mounting guide that helps align and secure TV internal components and panels for stable operation and fit. Replacing a damaged guide restores proper panel alignment and reduces rattles. What it does

• Positions and supports TV panels or internal modules to maintain correct alignment
• Keeps components from shifting, which can cause rubbing, noise, or uneven gaps
• Helps ensure consistent fit of the bezel and display assembly after reassembly
• Restores secure mounting where original guide is cracked, broken, or missing

• One guide assembly

• Disconnect power and remove the TV from its stand or wall before starting
• Partial disassembly of bezel or rear cabinet is typically required; keep track of screws and clips
• Handle the panel and internal cables carefully to avoid damage; wear an anti-static wrist strap if available
• Test fit before final reassembly and power-up to proper alignment

This guide assembly replaces the internal guide that helps align and support the TV panel and internal components, restoring proper fit and reducing rattles or misalignment. It's a straight swap for damaged or worn guides. What it does:

• Holds and aligns the display panel and internal modules to maintain correct spacing and fit
• Prevents panel movement that can cause rubbing, rattling, or uneven gaps
• Restores secure mounting after impact or wear that bent or broke the original guide
• Helps ensure proper chassis alignment for accurate screen placement and service access

• Disconnect power and remove the TV from its stand or wall before servicing
• Handle the display panel and internal cables carefully to avoid damage
• Use appropriate screwdrivers and keep fasteners organized for reassembly

This rail guide assembly supports and guides a refrigerator drawer along its slide track. Replacing a worn rail restores smooth, even movement and helps the drawer close properly without binding or coming off track.

• Guides the drawer along the slide path for smooth opening and closing
• Maintains alignment to keep the drawer level and stable
• Common symptoms of failure: sticking, rough or noisy travel, tilting, coming off track, or not closing fully
• Damage or wear to the rail can prevent proper drawer operation

• Disconnect power and remove drawer contents before servicing
• Pull out and remove the drawer/basket to access the rail
• Unfasten and remove the old rail; retain and transfer any mounting hardware or clips if needed
• Secure the new rail and test drawer travel for smooth, even operation

Rail Guide Assembly keeps a dishwasher or appliance drawer/rack aligned and sliding smoothly, restoring proper movement and preventing jams or sagging when the original guide is worn or broken. What it does:

• Guides and supports the drawer or rack along its track for smooth, even travel.
• Replaces cracked, worn, or bent guides that cause sticking, rough movement, or drooping.
• Helps restore proper alignment so the drawer/rack opens and closes without binding.
• Prevents further wear to adjacent rollers or tracks by restoring correct motion.

• Disconnect power (and water if applicable) before starting any repair.
• Remove the drawer/rack and any obstructing parts to access the guide; keep fasteners organized.
• Basic hand tools (screwdriver, nut driver) are typically required; align tabs/slots before securing.

This rail guide assembly provides the sliding track that supports a pull-out refrigerator drawer. Replacing a worn or bent rail restores smooth operation and proper alignment so the drawer opens and closes without sticking.

• Supports the drawer and provides a smooth sliding path
• Keeps the drawer level and aligned during travel
• Helps ensure full extension and proper closure
• Replaces rails that are bent, cracked, or have worn internal components
• Common symptoms include sticking, uneven movement, grinding/popping noises, or the drawer not closing flush

• Unplug the refrigerator and remove items from the affected drawer
• Remove the drawer/basket and door front per your model's instructions to access the rail
• Retain and reuse mounting screws and any brackets or end stops; transfer to the new rail if needed
• Install the new rail, ensure both sides are parallel and level, then test drawer travel before reloading

This is a factory-style screw used to secure components and panels on compatible LG appliances. It restores proper fit and reduces movement where a missing or stripped screw causes parts to sit loose. What it does:

• Fastens panels, brackets, or trim to appliance chassis to restore secure attachment
• Stops rattling or vibration caused by loose or missing fasteners
• Helps maintain proper alignment of removable parts for safe operation
• Serves as a direct replacement when the original screw is lost or damaged

• Screw

• Use the matching screwdriver or driver bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent damage to threads or plastic parts
• Replace only with the specified OEM screw to ensure fit and function
• Disconnect power to the appliance before accessing internal components when applicable

This hinge bolt secures the hinge to the appliance cabinet or door, keeping alignment true and motion smooth. Replacing a stripped, missing, or corroded bolt helps restore proper door operation and reliable closing.

• Fastens the hinge to support and stabilize the door
• Helps maintain alignment for smooth opening and closing
• Replaces damaged, stripped, or missing hardware

• Disconnect power to the appliance; shut off water supply if applicable
• Support the door to prevent strain on remaining hardware; enlist a second person if needed
• Note the order/orientation of any shims or washers and transfer them during reassembly
• Start threads by hand to avoid cross-threading; tighten securely without overtightening

The Freezer Door Gasket is an OEM replacement part for LG refrigerators. It is designed to create a tight seal around the freezer door, helping to maintain the internal temperature by preventing cold air from escaping and warm air from entering. This ensures the freezer operates efficiently and keeps food frozen at the proper temperature.

Over time, freezer door gaskets can wear out or become damaged due to repeated opening and closing, exposure to cold temperatures, or the buildup of dirt and debris. A faulty gasket can lead to temperature fluctuations and increased energy consumption.

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• The door not sealing properly
• Increased energy use
• Food not staying properly frozen

This OEM LG part is also compatible with Sears/Kenmore models.

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This door foam assembly replaces the inner insulating foam used inside a refrigerator/freezer door to restore thermal performance and reduce condensation. It helps maintain cold temperatures and improves energy efficiency when the original foam is damaged. What it does:

• Replaces worn, crushed, or missing door insulation to help maintain internal cabinet temperatures
• Reduces cold air loss and helps prevent moisture buildup and frost on the door interior
• Restores proper door fit and support when the original foam has deteriorated
• Can alleviate symptoms such as uneven cooling near the door edge, increased run time, or visible gaps/voids in the door

• One door foam assembly (inner door insulation), as shown

• Follow manufacturer service manual steps; handle foam carefully to avoid tears or compression
• Disconnect power if removal requires working near electrical components or lights
• Use appropriate adhesive/fasteners specified by the manufacturer when refitting the foam

This replacement home bar case is the molded compartment that fits into the refrigerator door to hold the home-bar area. It restores proper storage and support for bottles and accessories behind the home-bar door. What it does

• Serves as the molded housing/shelf for the refrigerator's home-bar compartment.
• Supports bottles and small items stored behind the home-bar door.
• Helps align and secure the home-bar door and internal components.
• Cracked or damaged cases can cause items to shift, rattle, or fall from the home-bar area.

• One home bar case

• Disconnect power to the appliance before beginning any repair.
• Remove the refrigerator door panel or inner liner as required to access the home-bar case; keep fasteners organized.
• Handle the plastic housing carefully to avoid further cracking; use correct OEM screws and clips for reassembly.
• Test the home-bar door operation and inspect for proper fit before returning the refrigerator to service.

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The Gasket Assembly Door is an OEM part for LG refrigerators. This gasket forms a seal around the refrigerator door, preventing warm air from entering and cool air from escaping, thus maintaining optimal temperature inside the refrigerator.

Causes of a bad gasket assembly can include wear and tear over time, damage from frequent opening and closing of the door, or degradation from exposure to various elements. A compromised gasket can lead to inefficiency in the refrigerator's cooling performance.

Symptoms of a bad gasket assembly include:

• Warm air entering the refrigerator
• Increased energy consumption
• Frost buildup inside the refrigerator
• The door not sealing properly or being difficult to close

This OEM LG part is also compatible with Sears/Kenmore models.

The French Door Mullion is an OEM part for LG refrigerators. It is a flap located between the two doors of a French door refrigerator, helping to seal the gap and maintain the internal temperature by preventing warm air from entering when the doors are closed. This component is crucial for energy efficiency and proper functioning of the refrigerator.

Over time, the mullion can wear out or become damaged due to frequent use, impact from door closures, or issues with the hinge mechanism. Causes of a bad French door mullion include wear and tear, physical damage, or a faulty hinge that causes misalignment.

Symptoms of a bad French door mullion include:

• The mullion not folding or unfolding correctly
• Visible cracks or damage to the mullion
• Warm air entering the refrigerator, affecting cooling
• Increased energy consumption

This OEM LG part is also compatible with Sears/Kenmore models.

This drawer guide is the plastic slide that supports and guides a freezer or refrigerator drawer for smooth, stable opening and closing. It replaces a worn or broken guide to reduce sticking, sagging, and drawer misalignment. What it does:

• Supports the drawer on its track so the drawer opens and closes smoothly
• Keeps the drawer aligned to prevent binding, scraping, or uneven movement
• Restores proper engagement with the drawer slide to stop sagging or partial drops
• Helps reduce noise and wear caused by a damaged or missing guide

• Disconnect power or unplug the appliance before accessing interior components
• Remove the drawer and any contents or glass shelves first to avoid breakage
• Typically secures with simple clips or a few screws; do not force parts—line up tabs before seating
• If metal parts are bent or the mating slide is damaged, inspect both sides and replace as needed

This decorative cap is a small trim piece that restores the finished look of your refrigerator door or exterior trim where the original cap is cracked, missing, or worn. It helps hide exposed hardware and keeps the appliance looking complete. What it does:

• Covers exposed screws, fasteners, or trim edges to restore appearance
• Prevents dirt and debris from collecting in exposed openings
• Addresses cosmetic issues like cracks, chips or missing trim pieces
• Simple trim replacement to refresh the appliance finish

• One decorative cap

• Typically installs by snapping or sitting into the trim opening; handle gently to avoid breaking surrounding trim
• Keep small parts away from children and pets
• If working near electrical components or water lines, unplug the appliance or turn off water supply before starting

This door basket is a direct-fit replacement refrigerator door bin that restores door storage for bottles, jars and other items. It keeps door contents secure and organized so you can use the full door storage again. What it does:

• Replaces a cracked, broken or missing door bin that no longer holds items securely
• Provides stable storage for bottles, condiments and small containers on the refrigerator door
• Restores proper door seal clearance by returning the original bin height and fit
• Helps stop items from falling out when the door is opened or closed

• One refrigerator door basket/bin

• Remove all contents from the old door bin before starting
• Most installations snap into place: align mounting tabs with door slots and press until it clicks
• If screws or clips are present, retain original fasteners and reinstall as needed
• For safety, handle glass/jar contents carefully and avoid forcing parts; unplug the appliance if you will be working inside sealed compartments

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

Restore organized, secure door storage. This replacement door bin/basket mounts on the refrigerator door to hold bottles, condiments, and small items so they stay contained, easy to reach, and off the main shelves. What it does

• Attaches to the refrigerator door to provide additional shelf storage
• Helps organize jars, bottles, and condiments for quick access
• Replace when cracked, warped, or with broken mounting tabs
• Symptoms include the bin falling off, not seating level, or items tipping/spilling

• One refrigerator door bin/basket

• Remove all items, then lift the old bin straight up to release from the door tabs
• Align the new bin with the mounting guides and press down until fully seated
• Verify it locks in place before loading; avoid overloading
• Handle plastic carefully; wear gloves if old parts have sharp edges

Replace a cracked or missing door basket to restore organized, secure storage on your refrigerator door. This bin mounts to the inner door to hold bottles and condiments so items stay put when you open and close the door. What it does:

• Mounts to the door to hold beverages, condiments, and small containers
• Replaces a broken, loose, or missing bin to restore proper fit
• Helps keep items upright and seated on the door tabs when properly installed
• Refreshes the interior appearance with an intact, clean bin

• Includes: 1 refrigerator door basket

• Remove contents, lift the old bin up and off the door mounts
• Align the new basket with the door tabs and press down until fully seated
• Confirm the basket is level and secure before loading items
• Close the door slowly to verify clearance and proper engagement

The Refrigerator Door Shelf is an OEM part for LG refrigerators. It provides additional storage space on the door of the refrigerator, allowing for the organization and easy access of frequently used items such as condiments, beverages, and small containers. It measures approximately 14" x 4" x 4".

Causes of a bad refrigerator door shelf can include general wear and tear from repeated use, overloading the shelf with heavy items, or accidental damage during cleaning or reorganization. Cracks or breakage in the plastic material can also render the shelf unusable.

Symptoms of a bad refrigerator door shelf include:

• Cracked or broken shelf
• Items not staying securely on the shelf
• The shelf not fitting properly into the door brackets
• Difficulty in attaching or removing the shelf

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This lower hinge assembly secures and supports the refrigerator/freezer door at its bottom pivot, restoring proper door alignment and smooth opening. Replaces a worn or damaged hinge to help reduce sagging, rubbing, or uneven sealing. What it does:

• Provides the pivot point and mounting for the bottom of the appliance door.
• Restores correct door alignment to improve door closure and sealing.
• Helps eliminate door sag, binding, or scraping during operation.
• Durable molded/metal construction built to match OEM fit and function.

• Disconnect power and empty/secure the door before starting; prop or support the door to prevent dropping.
• Keep fasteners and alignment shims used during removal for reference; transfer any hardware only if explicitly required.
• Use basic hand tools; follow the appliance service manual for torque and alignment instructions.

This bushing is a replacement shaft support that stabilizes a rotating assembly and helps reduce wear and noise. It restores smooth movement and helps maintain proper alignment for the appliance component. What it does

• Supports and centers a rotating shaft or drum to reduce wobble and rubbing
• Reduces noise and friction from worn pivot or support points
• Helps prevent uneven wear on mating parts and prolongs assembly life
• Commonly replaced when you hear squeaking, grinding, or notice excessive play

• One bushing

• Inspect mating surfaces and replace any damaged clips, seals, or fasteners as needed
• Use basic hand tools; hold the assembly steady and press the bushing squarely into place
• If the bushing is press-fit, use a suitable driver or press to avoid damage
• Disconnect power and follow all safety precautions before beginning repairs

This door stopper assembly mounts at the hinge to control how far the door opens and promote smooth, consistent closing. Replacing a worn or broken stopper restores proper door swing and helps protect the hinge from overextension.

• Limits the door's opening range to prevent overextension
• Guides and cushions door movement for a smoother close
• Helps maintain door alignment at the hinge area
• Common symptoms: door swings too far, doesn't stop at the usual angle, clicks/binds near the hinge, or visible cracks/wear on the stopper

• Disconnect power to the appliance before servicing
• Support the door and use a helper when loosening hinge hardware
• Note the original orientation and transfer any spacers/shims if present
• Tighten fasteners evenly and verify smooth door operation before finalizing reassembly

This door stopper mounts at the hinge to limit the refrigerator door's opening angle and provide a positive stop. Replacing a worn stopper helps protect the hinge, prevent over-swing, and promote a smooth, even door seal.

• Limits door opening at the hinge to prevent overextension
• Helps maintain door alignment and consistent gasket contact
• Reduces impact that can loosen hinges or damage the cabinet
• Common symptoms: door swings too far, clunks at full open, doesn't stop smoothly, or shows visible wear at the stop

• Disconnect power and remove items from the door to reduce weight
• Support the door; remove hinge cover and fasteners as needed to access the stopper
• Install the new stopper in the same orientation; tighten hardware securely
• Verify door swing and sealing after reassembly

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This slide rail guides and supports a single appliance drawer or pull-out door so it opens and closes smoothly and stays aligned. Replaces a worn, bent, or noisy guide to restore proper movement and stability. What it does:

• Provides a rolling/sliding track for a drawer or pull-out door to travel smoothly
• Replaces damaged or worn rail that causes sticking, misalignment, or uneven movement
• Helps keep the drawer properly supported and prevents sagging or binding
• Works as a direct-fit replacement when the original rail is broken or worn

• One slide rail (single left or right guide)

• Disconnect power and empty the drawer before starting repairs
• Typical installation requires removing the drawer and fastening the rail with existing screws or clips
• Inspect mating hardware and replace any stripped screws or broken clips for secure fit

This rail holder is a small mounting bracket that secures a sliding rail or shelf rail inside the appliance, restoring stable support and proper alignment for the rail assembly. It's a direct-replacement style part used where a broken or worn bracket allows the rail to sag or detach. What it does:

• Secures the end of a sliding shelf or drawer rail to the appliance frame for stable movement
• Restores proper alignment when a rail droops, binds, or pulls away from its mounting point
• Prevents the rail from disengaging or falling during use
• Works with the original rail assembly to maintain smooth in-and-out travel

• One rail holder / rail mounting bracket (quantity: 1)

• Disconnect power (or unplug appliance) before starting work and allow any hot surfaces to cool
• Basic hand tools (screwdriver or nut driver) may be required; keep fasteners for reuse unless new ones are provided
• Handle edges carefully; support the rail/shelf while removing or installing the holder to avoid drops or damage

This rail holder is a small mounting bracket that secures a sliding rail or guide to the appliance, restoring smooth movement and proper alignment. It's a direct-fit replacement designed to replace worn or broken rail supports. What it does:

• Secures and supports a sliding rail or guide so drawers/doors move smoothly
• Prevents rail movement that can cause rubbing, sticking, or uneven travel
• Restores proper alignment when a damaged holder causes noisy or wobbly operation
• Helps maintain safe rail attachment to the cabinet or frame

• Disconnect power (or unplug) and move the appliance to a safe, stable position before starting
• Basic hand tools are typically required; save mounting hardware unless replacement is specified
• If mounting screws or clips are damaged, replace them to ensure a secure fit

This slide rail is a direct-fit replacement that restores smooth, reliable movement to a refrigerator or freezer drawer. It replaces a worn or broken glide so the drawer opens and closes without sticking or sagging. What it does:

• Replaces a damaged or worn drawer glide to restore proper sliding action
• Supports the drawer to keep it level and reduce binding or sticking
• Reduces noise from grinding or scraping during drawer movement
• Helps maintain correct drawer alignment for proper sealing and operation

• Verify left/right orientation and part number before installation
• Remove contents and disconnect power if working near electrical components
• Typical installation uses existing mounting points and hardware; save original fasteners when possible

Note: Left Rail Cap

Note: Right Rail Cap 

This ice maker gear drives the ejector blades that push ice from the tray into the bin. Replacing a worn or broken gear restores proper harvest cycles and stops grinding or slipping during ejection. What it does:

• Turns the ice maker ejector to release ice cubes during the harvest cycle.
• Stops or reduces grinding noises and slipping when the gear teeth are stripped or damaged.
• Helps restore regular ice production when the ejector no longer rotates.
• Works as the replacement driven gear in compatible LG ice maker gear trains.

• Disconnect power before servicing the ice maker to avoid shock or injury.
• Remove the ice maker assembly to access the gear; follow OEM instructions for disassembly.
• Inspect the mating gear, motor shaft, and ejector assembly for wear—replace additional damaged parts as needed.
• Use the matching part number to ensure fit.

This center hinge assembly secures and guides the refrigerator doors, restoring correct door alignment and smooth opening. Replaces worn or damaged center hinge hardware to help stop sagging and improve door sealing. What it does:

• Provides the central pivot point between the refrigerator doors for proper alignment and operation
• Restores smooth, even door movement when original hinge is worn or bent
• Helps the doors close fully to maintain the appliance seal and consistent internal temperature
• Fits the factory mounting points and matches OEM form for direct replacement

• Basic removal of trim and temporary support of the doors is required; have a helper to steady doors during replacement
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Disconnect power only if removing electrical components nearby; this part replacement is typically mechanical
• Inspect surrounding hinge screws and door hardware and replace if worn for best results

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

This upper hinge assembly replaces the top door pivot on compatible refrigerators to restore proper door alignment and smooth opening. It helps keep the door level and seals evenly to prevent cold air loss and improve operation. What it does:

• Provides the pivot point that supports the top of the refrigerator/freezer door
• Restores proper door alignment when the door is sagging, rubbing, or not closing completely
• Reduces uneven gaps that can cause cold air leakage and frost buildup
• Works with the existing lower hinge and door components to re-establish smooth opening and closing

• One upper hinge assembly

• Disconnect power to the appliance before starting and remove food from the door area as needed
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use the correct hand tools and follow torque recommendations from the manufacturer; avoid overtightening

This hinge secures and guides a refrigerator door for reliable opening and closing. It restores proper door alignment to help maintain an airtight seal and prevent sagging or rubbing. What it does:

• Supports the refrigerator door and attaches it to the cabinet frame
• Guides smooth door movement and maintains alignment
• Helps prevent door sag, uneven gaps, and items catching when opening/closing
• Reduces rubbing, scraping or abnormal door noise caused by a worn hinge

• Disconnect power and remove food from the door before starting; support the door to prevent dropping
• Use the factory mounting screws and follow OEM torque and alignment steps
• Check door position and seal after installation; adjust hinge mounting if necessary

This upper hinge assembly supports the refrigerator door at the top, providing a smooth pivot and proper alignment. Replacing a worn hinge restores even gaps and a tight seal to help maintain consistent cooling performance.

• Supports the door's weight and provides the top pivot point
• Maintains alignment for correct gasket compression and a tight seal
• Helps the door open and close smoothly without rubbing or binding
• Common signs of wear: door sagging or misalignment, rubbing/clicking noises, and poor sealing or condensation around the gasket

• Unplug the refrigerator before servicing.
• Remove the top hinge cover; retain screws and any shims for reuse.
• Support the door with a helper while removing and installing the hinge.
• Position the new hinge, align the door, then tighten screws and verify smooth swing and full gasket contact all around.

The Ice Dispenser Door Assembly is an OEM part for LG refrigerators. This assembly includes the door and the necessary components that control the opening and closing of the ice dispenser chute. It plays a vital role in maintaining the efficiency of the ice dispensing system by ensuring that the ice chute remains sealed when not in use, preventing warm air from entering the freezer compartment.

Causes of a bad ice dispenser door assembly can include wear and tear from frequent use, damage from ice buildup, or issues with the mechanical or electronic components that control the door.

Symptoms of a bad ice dispenser door assembly include:

• Ice dispenser door not opening or closing properly
• Frost or ice buildup around the ice chute
• Warm air leaking into the freezer, affecting its temperature
• The ice dispenser not functioning efficiently

This OEM LG part is also compatible with Sears/Kenmore.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This replacement spring restores proper tension to a microwave oven door hinge so the door opens and closes smoothly and holds position. It's a direct-fit part that helps eliminate sagging or uneven door movement. What it does

• Replaces a worn or broken hinge spring to restore proper door tension and alignment
• Helps prevent door from dropping open or not staying closed securely
• Supports smooth, controlled door opening and closing motions
• Addresses symptoms such as a sagging door, uneven closing, or loose-feeling hinge

• One replacement hinge spring (quantity: 1)

• Disconnect power to the appliance before attempting any service to avoid electrical shock
• Access may require removing the outer door panel or control panel; follow OEM disassembly instructions
• Handle the spring carefully—springs can be under tension and may release suddenly

This holder bracket replaces a damaged or missing mounting support. It secures an internal component so it stays aligned and stable, helping your appliance operate smoothly without looseness or rattling.

• Provides a rigid mounting point to hold a component or assembly in place
• Maintains alignment to reduce vibration, rubbing, and intermittent operation
• Restores support when the original bracket is cracked, warped, or missing
• Common symptoms include a loose/wobbly part, rattling noises, or visible broken tabs

• Disconnect power to the appliance before servicing
• Note the original bracket's orientation and transfer any clips or screws from the old part
• Use existing hardware and tighten fasteners evenly—do not overtighten
• Verify proper fit and alignment before restoring power

The Right Ice Door Spring is an OEM part for LG refrigerators. This part provides the necessary tension to ensure the ice door opens and closes smoothly, maintaining the seal to keep the ice compartment cold and efficient.

Causes of a bad ice door spring can include wear and tear over time, loss of tension due to repeated use, or physical damage from accidental mishandling.

Symptoms of a bad Right Ice Door Spring include:

• Ice door not staying closed
• Difficulty in opening or closing the ice door
• Unusual noises when the ice door operates
• Increased frost buildup around the ice compartment

This OEM LG part is also compatible with some Kenmore models.

The Dispenser Lever Retainer is an OEM part for LG refrigerators. This part secures the dispenser lever in place, this part ensures the smooth operation of the water and ice dispenser. 

Causes of a bad Dispenser Lever Retainer can include normal wear and tear from repeated use, accidental damage, or deterioration of the material over time.  

Symptoms of a bad Dispenser Lever Retainer include:

• The dispenser lever is loose or wobbly
• Difficulty in dispensing water or ice
• The lever does not return to its original position after use
• Unintended activation or difficulty in activating the dispenser

This OEM LG part is also compatible with some Kenmore models.

The Left Ice Door Spring is an OEM part for LG refrigerators. It is responsible for providing the necessary tension to ensure the ice door closes properly after dispensing ice. This spring helps maintain an airtight seal, preventing warm air from entering the ice compartment and ensuring efficient operation of the ice maker.

Over time, the ice door spring can become worn out, lose tension, or break due to repeated use or accidental damage. A faulty spring can result in the ice door not closing correctly, which can lead to issues with ice production and storage.

Symptoms of a bad left ice door spring include:

• The ice door not closing or sealing properly
• Warm air entering the ice compartment
• Excessive frost buildup around the ice dispenser
• The ice door feeling loose or not springing back into place

This OEM LG part is also compatible with Sears/Kenmore models.

This replacement funnel channels flow cleanly through the dispenser/fill area, guiding it into the correct passage to help prevent spills, drips, and messes when the original piece is cracked, warped, or missing.

• Guides flow into the correct passage within the dispenser or fill area
• Helps reduce drips, leaks, and misdirected flow caused by damage or wear
• Restores clean, accurate dispensing and a tidy appearance
• Common symptoms include leaking/dripping at the dispenser, misdirected stream, visible cracks, or a loose/missing funnel

• Disconnect power; shut off water supply if applicable
• Remove surrounding trim or fasteners carefully and retain hardware for reuse
• Clean the mounting area before installing the new funnel
• Ensure tabs/locks fully seat; secure fit before restoring power and water

The Ice Dispenser Door Lever is an OEM part for LG refrigerators. This part is responsible for operating the ice dispenser door, allowing ice to be dispensed from the ice maker when the lever is pressed.

Causes of a bad part can include mechanical wear and tear from repeated use, physical damage or impact, or issues with the internal mechanisms that control the lever's motion.

Symptoms of a bad Ice Dispenser Door Lever include:

• Failure of the ice dispenser door to open when the lever is pressed
• The door opening erratically or becoming stuck
• Difficulty in dispensing ice due to the improper operation of the door

This OEM LG part is also compatible with some Kenmore models.

The Door Handle Holder Assembly is an OEM replacement part for LG refrigerators. It contains the internal brackets and mounting hardware required to securely attach the refrigerator door handles.

Causes of a faulty door handle holder assembly include wear from years of use, broken or stripped screws, or cracks in the plastic from heavy pulling or slamming.

Symptoms of a problematic door handle holder assembly are:

• Loose, wobbly or disconnected door handles  
• Difficulty opening the refrigerator door 
• Handles that do not stay flush or feel secure

This OEM LG replacement is compatible with select Kenmore side-by-side refrigerator models as well.

This display cover assembly is the front fascia for the user interface. It finishes the control area, protects the display from everyday wear, and helps keep buttons or touch zones properly aligned for clean looks and reliable use. What it does:

• Covers and finishes the display/control area for a clean appearance
• Helps shield UI components from moisture, spills, and light impact
• Provides alignment/mounting for buttons or touchpad lens areas
• Common symptoms: cracked or broken panel, loose/missing trim, worn graphics, buttons sticking or misaligned

• One display cover assembly

• Disconnect power before servicing to avoid electrical shock
• Use a plastic pry tool and remove any screws to release the old cover without damaging tabs
• Transfer any clips, light pipes, or nameplates from the old cover to the new one
• Seat the new cover evenly; ensure all tabs engage and fasteners are secure before restoring power

The Ice Dispenser Button is an OEM part for LG refrigerators. It is a part of the refrigerator's ice dispensing system, enabling users to easily select and dispense ice with the press of a button.

Over time, the ice dispenser button can experience wear and tear from regular use, or it may become unresponsive due to electrical issues or physical damage such as cracking or breaking. 

Symptoms of a bad Ice Dispenser Button include:

• The button not responding or requiring extra force to activate
• Ice not dispensing when the button is pressed
• The button sticking in the pressed position
• Visible damage or wear to the button

This OEM LG part is also compatible with Sears/Kenmore.

The Dispenser Cover is an OEM part for LG refrigerators. It covers and protects the dispenser area where water and ice are dispensed, ensuring the components remain clean and functional.

Over time, the dispenser cover can become damaged due to repeated use, exposure to moisture, or accidental impact. A compromised cover can affect the appearance of the refrigerator and lead to difficulties in using the dispenser.

Symptoms of a bad Dispenser Cover include:

• Cracks or breaks in the cover
• Difficulty in operating the dispenser
• Water or ice leaking from the dispenser area

This OEM LG part is also compatible with Sears/Kenmore.

Note: This is just the cover and does not include any other components. For the entire assembly, order part number ACQ85430239.

The Water Dispenser Button is an OEM part for LG refrigerators. This part allows users to easily dispense water with a simple press. It's directly connected to the electronic control system of the refrigerator, ensuring that when pressed, it signals the refrigerator to activate the water dispenser. 

Causes of damage to the Water Dispenser Button often involve repeated use, which can wear down the mechanical components, or impact damage from objects hitting the button.  

Symptoms of a bad Water Dispenser Button include:

• The button sticking or failing to spring back after being pressed.
• No water being dispensed when the button is pressed, indicating a possible fault in the signal transmission to the control system.
• The button feeling loose or falling off, suggesting that the mounting or connecting components may be damaged.

This OEM LG part is also compatible with some Kenmore models.

The Dispenser Drip Tray is an OEM part for LG refrigerators. Positioned discreetly below the dispenser spouts, this drip tray collects any accidental overflow or spills from beverage containers.

Causes may involve cracking or deformation of plastic over extended use. Mineral scale marks or stains are also common.

Symptoms of a bad dispenser drip tray include:

• Puddles or stains around the base of the dispenser unit
• Overflow running inside the refrigerator cabinet
• Odors developing from residual liquids near warm compressor

This OEM LG part is also compatible with some Kenmore models.

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

The Compressor is an OEM part for LG refrigerators. As the primary component that circulates refrigerant to chill the refrigerator and freezer compartments, it is crucial for proper cooling operation. The compressor works with the condenser fan and evaporator coil to regulate temperatures inside the refrigerator. 

Causes of a faulty compressor can include gradual breakdown of motor windings, loss of refrigerant pressure over time, or failure of electrical components vital to operation.

Symptoms of a bad compressor are:  

• Elevated fridge/freezer temperatures unable to be maintained
• Frost patterns indicating poor or insufficient cooling 
• Abnormal vibrations or sounds upon compressor cycling
• Error codes displayed regarding cooling performance

It is also compatible with Sears/Kenmore refrigerator models.  
 

This evaporator assembly is the sealed coil component that removes heat from the freezer section, helping maintain proper cold temperatures and consistent food preservation. It replaces a worn or damaged evaporator to restore effective cooling. What it does:

• Absorbs heat from inside the freezer compartment so the refrigerant can carry it away
• Supports proper airflow through the freezer evaporator compartment for consistent cooling
• Commonly used when the freezer is not reaching temperature or shows frost/freeze buildup on the evaporator area
• Works with the appliance's defrost system and refrigeration components to maintain correct operation

• Disconnect power before servicing; handle components carefully to avoid sharp fin injury
• Inspect surrounding gaskets, insulation, and mounting hardware during replacement and replace as needed
• Test defrost and fan operation after installation to confirm proper system function

The Thermistor Assembly, PTC is an OEM part for LG refrigerators. Located within refrigerator compartments, the thermistor monitors interior temperatures sending signals to the control board. It contains a temperature-sensitive resistor to provide precise feedback on cooling needs. This feedback allows the refrigeration system to maintain consistent temperatures across all food storage areas. 

The causes of thermistor issues arise from normal component degradation, impacts, water damage, and manufacturing defects affecting sensor accuracy.

Symptoms of a bad Thermistor Assembly include:

• Fluctuating or inaccurate temperature readings  
• Compartments failing to maintain proper cooling levels
• Frost or condensation builds up inside
• Repeated Auto Defrost error messages

This genuine LG replacement preserves dependable monitoring for balanced refrigeration control. Keeping food fresher longer and suitable for Sears/Kenmore refrigerators with LG components.

The Overload Compressor is an OEM part for LG refrigerators. This part protects the refrigerator's compressor from overheating and potential damage by acting as a safety device. It works by monitoring the compressor's electrical current and temperature. If the compressor operates under conditions that could lead to overheating or overcurrent, the overload protector will cut off the power to the compressor, allowing it to cool down before potentially restarting.

Causes of damage to the Overload Compressor can include power surges, electrical faults within the refrigerator, or a malfunctioning compressor that requires more current than usual to operate. 

Symptoms of a bad Overload Compressor include:

• The refrigerator not cooling properly or not cooling at all
• The compressor failing to start, indicated by a clicking sound coming from the back of the refrigerator where the compressor is located.
• The refrigerator or freezer section warming up

This OEM LG part is also compatible with some Kenmore models.

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

This compressor damper is a vibration-isolating mount that sits between the sealed-system compressor and the chassis. It cushions the compressor to reduce noise, limit vibration transfer, and help keep refrigerant lines from being stressed.

• Isolates the compressor from the frame to absorb start/stop shock and vibration
• Helps reduce humming, rattling, or buzzing from the back/bottom of the appliance
• Replaces a damper that's cracked, flattened, hardened, or missing
• Can help if the compressor rocks or the unit vibrates excessively

• Disconnect power and pull the unit forward for access; remove rear/service panel if present
• Support the compressor to relieve load on the mounts before removing fasteners
• Match orientation; transfer any sleeves/spacers from the old damper to the new one
• Ensure the compressor sits level and that tubing is not strained before restoring power

This drip tray catches and channels water runoff inside the appliance to help prevent pooling and minor leaks. It's a direct-fit replacement listed by the manufacturer and sold as the single tray used in the unit. What it does

• Collects condensate or defrost water and directs it to the drain area to prevent pooling.
• Helps stop water from dripping onto lower drawers, shelves or the floor.
• Commonly replaces a cracked, warped or missing tray that causes visible leaks or water buildup.
• Fits into the appliance's lower compartment where the original tray sat.

• Unplug the appliance or disconnect power before servicing.
• Remove any obstructing drawers or shelves to access the tray location; handle glass shelves carefully.
• Lift out the old tray and set the new tray into the same position; no special tools typically required.

Replacement fan guide that directs airflow from the refrigerator fan to improve cooling distribution and help keep the fan blade clear of nearby components. Restores proper airflow and can reduce rubbing or scraping noises. What it does:

• Channels airflow from the fan to promote even temperatures throughout the compartment.
• Keeps the fan blade aligned and away from cabinet walls and other components.
• Commonly replaced when cracked, warped, or broken parts cause rubbing or unusual fan noise.
• Helps maintain efficient cooling by restoring the intended airflow path.

• Disconnect power (unplug or shut off breaker) before servicing the appliance.
• Access typically requires removing the interior cover or rear evaporator cover.
• Handle the plastic guide carefully to avoid cracking; align mounting tabs and secure using the original fasteners.
• Inspect the fan blade and motor for damage while replacing the guide; replace any damaged components to avoid repeat issues.

This drain tray assembly collects and directs moisture and condensate to the drain system, helping prevent leaks and pooling under the appliance. Designed to fit the appliance's drain path and restore proper drainage. What it does:

• Captures condensate and channel water toward the drain to reduce standing moisture.
• Helps prevent water from pooling under components that could cause corrosion or odors.
• Restores proper drain routing after a damaged or cracked tray is removed.
• Works with existing hoses and clips to maintain normal drainage performance.

• Disconnect power and water before beginning repair.
• Remove access panels or components as needed to reach the drain tray; keep fasteners organized.
• Inspect surrounding seals, hoses, and clips and replace any worn parts to ensure a watertight fit.
• Reassemble panels and test the appliance for proper drainage and leaks before returning to service.

This cover assembly protects the machine components and helps keep internal machinery free of debris and accessible for repair. It provides a durable barrier that helps extend component life and maintains safe operation. What it does:

• Shields motors, belts and internal linkages from dust and lint that can cause wear
• Helps contain moving parts to reduce pinch or contact hazards during normal use
• Maintains proper component alignment by providing a stable mounting surface
• Commonly replaced when cracked, warped, missing fasteners, or damaged from impact

• One cover assembly as shown

• Disconnect power before attempting service
• Handle gently to avoid cracking plastic tabs; inspect mounting clips and screws for damage
• Reuse original fasteners only if undamaged; replace any stripped screws or broken clips

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

The Drier Assembly is an OEM part for LG refrigerators. This part removes moisture and contaminants from the refrigerant, ensuring the system operates efficiently and effectively. The drier assembly helps maintain the proper function of the compressor and other cooling components, contributing to the longevity and performance of the refrigerator.

Causes of a bad drier assembly can include clogs from debris, wear and tear over time, or contamination from moisture or refrigerant leaks.  

Symptoms of a bad drier assembly include:

• The refrigerator not cooling properly
• Frost or ice buildup on the evaporator coils
• Increased noise from the compressor
• Reduced efficiency and higher energy consumption
• You should replace the drier assembly if it becomes faulty or damaged.

This OEM LG part is also compatible with select Sears/Kenmore models.