Need Help?
Call
Twin-muffler assembly for riding mowers with two-cylinder engines. Connects to exhaust pipes to reduce noise and emissions. Replace if cracked or damaged.
Usually ships within 4 - 14 days
This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.
Replacement oil tank cap for chainsaws with integrated press bulb. Covers oil reservoir to prevent debris contamination. Needed when cracked or broken.
The new bracket worked out perfectly and the oil cap had deteriorated, fixing the problem was easy with the new parts. Read more
Replacement oil drain plug for outdoor power equipment engines. Installs in the oil pan to seal the drain opening. Replace if stripped, cracked, or leaking.
This is a genuine replacement for Echo 3 x 6 x 80 clear yellow pipe. The pipe is used on various engines and lawn and garden machines to transport fuel between the fuel tank and the carburetor. This pipe is made of durable plastic material, but it can become brittle and crack or break over time. This could lead to leaks or even a total engine failure, which is why it is important to replace pipes as soon as possible to ensure that further damage does not occur. This replacement part can repair various compatible machines that require a genuine Echo part. This clear fuel line pipe is designed to work with tillers, trimmers, blowers, and other lawn and garden equipment with small engines made by Echo. It is important to drain the fuel from the engine and the fuel tank before beginning any work on the fuel system. Allow the engine to cool completely and wear gloves whenever performing engine repairs. This pipe is sold as a single unit and does not include any hardware or additional parts.
Recoil spring for chainsaw starter mechanism. Applies tension to pulley for rope retraction. Replace if worn, rusted, broken, or damaged to restore operation.
This kit includes replacement diaphragms and gaskets for the carburetor on a gas-powered chainsaw or other small engine outdoor equipment. These components create proper seals within the carburetor to regulate fuel flow and air-fuel mixture. Replace this kit if the engine is hard to start, runs rough, stalls frequently, or leaks fuel from the carburetor area.
Hardened washer for lawn tractors and riding mowers. Installs with bolts to redistribute pressure and prevent loosening. Replace if worn or missing.
Secures the mower blade to the spindle on riding mowers and tractors. Replace if bolt is stripped, washer is damaged, or hardware is missing.
This component is a deck belt used in lawn mowers and lawn tractors. It is attached to the transmission pulley and is responsible for helping drive the machine. The deck belt helps the mower blades turn while in use. If the belt is cracking, it should be replaced before it breaks. When the deck belt breaks, the lawn mower will not operate correctly.Park the lawn mower on a flat surface, turn off the engine and remove the key. Disconnect the spark plug wire to prevent the equipment from starting on accident. Put the mower deck at its highest position and place wooden blocks. Lower the deck onto the blocks. The belt will need to be removed from the engine pulley and the idler arm. If stabilizer and lift arms are present, disconnect them. Pull the hooks on both sides to release the deck. Remove the belt guard to take off the original belt. Install the new one and reverse the above instructions.This deck belt is designed to fit lawn mowers and lawn tractors created by Poulan and Husqvarna. It is an authentic OEM replacement component that is sold on an individual basis. The part is directly sourced from the manufacturer.
This chain guide plate is a genuine Husqvarna part, sold individually. This chain guide plate can be used as a replacement part in a chainsaw. The purpose of the chain guide plate in a chainsaw is to stabilize and secure the placement of the chain bar bolts as well as to space out the placement of the crankcase and the bar so that the chain can freely rotate and facilitate the operation of the chainsaw.The chain guide plate in a chainsaw might have to be completely replaced if the chain guide plate is punctured, dented, cracked, chipped, scraped, warped, or eroded. If the chain guide plate cannot serve its critical function within the internal machinery of the chainsaw, the chain guide plate should be removed and replaced by this genuine OEM replacement part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipmentThis is a genuine OEM replacement, directly from the manufacturer. It is sold individually. This chain guide plate is compatible with products from Husqvarna.
This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.
This is a coiled rewind spring that fits inside the recoil starter assembly of a string trimmer. It stores the energy needed to retract the starter rope after each pull, allowing the engine to be started repeatedly. Replace this spring if the pull cord does not retract on its own, feels loose, or if the spring is visibly broken or unwound.
Air filter catches debris and dirt entering your chainsaw engine, preventing damage and buildup. Replace when dirty or clogged for optimal performance. Verify fit with your model number.
Piston ring seals the space between piston and cylinder wall in gas-powered outdoor power equipment engines. Replace if worn, cracked, or causing smoke.
Replacement fuel tank for front-engine lawn tractors and riding mowers. Installs to store fuel. Replace if cracked, damaged, or leaking.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.