Need Help?
Call
Connects carburetor to adapter on gas trimmers. Replace if cracked, brittle, or causing air leaks and poor engine performance. Verify fit with your model.
Usually ships within 4 - 14 days
This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
This part is an ignition module that is used on chainsaws. An ignition module is a component of the engine ignition system. This part connects the spark plug to the engine and supplies power that helps create the spark which starts the engine.A new ignition module may be needed if the original is cracked, broken, or damaged in any way. The ignition module may become damaged or worn after normal use over a period of time. If this is the case, the ignition module will need to be replaced for the chainsaw to turn on. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This ignition module is a genuine Husqvarna part. It is sold individually. This specific ignition module is compatible with chainsaws that are manufactured by Husqvarna, Poulan, and Jonsered.
The carburetor is the part of the chainsaw that mixes air from the intake valve system and gas before the fuel mixture goes to the engine. This ensures that the chainsaw is capable of continuing to run while it is in use. A bad carburetor will cause problems with how the chainsaw runs, and it may stop running during work. If the engine does not start when the tank is full of fresh fuel, test the carburetor. Start by removing the air filter and pouring a teaspoon of fuel onto the carburetor. Then, pull the starter rope to start the engine. If the engine starts but quickly dies, it means that the carburetor will likely need to be replaced. The replacement of the new carburetor is fairly simple. Remove the rear cover on the chainsaw to remove the old carburetor. Once you have removed the old carburetor, you can then install the new carburetor. Replace the cover and test the chainsaw. This is an OEM sourced part that will work with several models of chainsaws from Poulan and Craftsman.
Replacement oil cap for chainsaw oil tank. Seals the oil reservoir to prevent leaks and keep debris out. Order when original cap is cracked or lost.
Pleated air filter captures debris before it reaches the carburetor and engine. Replace when dirty or clogged to maintain performance. Verify fit using your model number.
Replacement flywheel assembly for gas chainsaws. Mounts to the crankshaft with magnets that generate ignition charge. Replace if cracked or damaged.
This lever control is a genuine Husqvarna part, sold individually. This lever control can be used as a replacement part for a lawnmower. The lever control regulates the throttle of the lawnmower so that the engine remains activated when the lever is engaged, and the engine is shut off when the lever is disengaged.If the engine is not responding to the lever control in any of its settings, it is likely that the lever control has suffered damage and should be replaced. If the lever control, upon a visual inspection, seems to be punctured, torn, scraped, eroded, or damaged in some other way as a result of general wear and tear over long-term usage or from a direct impact with a hard object, the lever control should be removed and replaced with this genuine OEM replacement part before using the lawnmower again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This lever control is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.
Replace your chainsaw's seal and bearing assembly to reduce friction and stabilize moving parts. Essential for smooth operation. Verify fit with your model.
Fix fuel leaks or engine flooding on your riding mower with this fuel check valve. Controls fuel flow between tank and carburetor. Easy DIY repair.
Replacement bar adjustment kit for chainsaws. Includes adjustment bolt, retainer ring, and pin. Installs inside clutch cover to maintain proper chain tension. Replace if broken, worn, or missing.
Fix chain oil leaks and inadequate bar lubrication with this chainsaw oil pump kit. Ensures proper oil flow to bar and chain during operation.
This OEM part is a ? X 20 chain made for gas-powered chainsaws. The chain is one of the most important parts of a saw because it is what cuts the wood or whatever it is cutting. A new chain may be needed when the chain starts to stretch over time with regular use. The chain can also become too dull and will not cut effectively. In some instances, the chain may completely break. The operator can watch for signs that a chain needs a replacement, such as crooked cuts or if the chain no longer pulls itself into the wood. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This genuine Poulan part is sourced directly from the manufacturer and sold individually. This chain is only compatible with Poulan gas-powered chainsaws.
This is a standard fuel cap for a hedge trimmer, chainsaw, or weed eater. The fuel cap assembly goes into the tank then screws onto the top of the fuel tank. A fuel cap keeps dirt and debris from falling into the fuel tank and gunking up the engine, causing it to misfire or corrode. Fuel cap assemblies are made of plastic, so they can dry out and snap. If the rubber seal on the fuel cap assembly is no longer preventing fuel from leaking, it’s time to replace it. Installing a new fuel cap assembly is simple. Just push the stopper in and screw on the lid. This is a genuine OEM product shipped from Husqvarna, the manufacturer of this part. This part is also compatible with Craftsman and Poulan products. Part sold individually.
This clutch drum is a genuine Husqvarna part. This clutch drum is a genuine OEM sourced part from the manufacturer. It includes the clutch drum and bearing kit and also includes the needle bearing. This Husqvarna clutch drum is designed for a 2-cycle engine clutch. The clutch allows the speed of the chainsaw to engage and change. It is normal for the clutch to wear out over time. It will be apparent when it is time to replace the clutch, as the engine won't turn on and the chain will not rotate. It is manufactured for compatibility with several models of Husqvarna chainsaws, including (but not exclusively) many in the 340, 350, 440, and 450 series. It is also compatible with the Craftsman 358382000 chainsaw. It may be compatible with other makes and models as well, including RedMax, Poulan/Poulan Pro, McCulloch, Weed Eater, AYP, and Jonsered.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.